2009 Hyundai Elantra: How to Replace the Factory Stereo
ฝัง
- เผยแพร่เมื่อ 11 ก.พ. 2025
- 2009 Hyundai Elantra: How to Replace the Factory Stereo
In this video, we show you step by step how to install a new car stereo in your 2009 Hyundai Elantra. From removing the factory deck to wiring in the new unit, we cover all the necessary steps to ensure a seamless installation. The radio installed was a $100 Amazon radio made by RIMOODY. We also provide tips and tricks to make the process as easy and stress-free as possible. Whether you're a seasoned DIYer or a first-time installer, this video will guide you through the process and have you enjoying your new car stereo in no time. Don't forget to subscribe to our channel for more car audio installation tutorials and other automotive content.
Elantra Playlist:
• Hyundai Elantra
Amazon Links:
$100 Radio
amzn.to/405Kvd0
Dash Kit
amzn.to/3HzMtes
Wire Harness
amzn.to/40aSzcv
Pry Tools
amzn.to/3WG4NXB
Crimp Caps
amzn.to/3WGHVr9
T-tap kit
amzn.to/3kJzBcJ
Wire Strippers
amzn.to/3kIOT1w
Wire Crimpers
amzn.to/3kLhljg
Wire Crimper/Stripper Combo
amzn.to/3HBRjIr
Disclaimer for DC Auto Enhancement
We are doing our best to prepare the content of this site. However, DC Auto Enhancement cannot warranty the expressions and suggestions of the contents, as well as its accuracy. In addition, to the extent permitted by the law, DC Auto Enhancement shall not be responsible for any losses and/or damages due to the usage of the information on our website.
By using our website, you hereby consent to our disclaimer and agree to its terms.
The links contained on our website may lead to external sites, which are provided for convenience only. Any information or statements that appeared in these sites are not sponsored, endorsed, or otherwise approved by DC Auto Enhancement. For these external sites, DC Auto Enhancement cannot be held liable for the availability of, or the content located on or through it. Our Privacy Policy was created by the Privacy Policy Generator. Plus, any losses or damages occurred from using these contents or the internet generally.
2007 Hyundai Elantra
2008 Hyundai Elantra
2009 Hyundai Elantra
I’m going to do this for sure !! Thank u sir.
Many thanks again so pink wire on power harness
I can't say for sure, but if that is what I hooked up to in the video, I would say that is correct.
Thank you for the video. Will be doing this on my Son's Elantra.... :)
If you have any questions, let me know.
I truely thank you soo much kindly would you enrich this model playlist with everything disassembly videos
I will go through the Elantra playlist and make sure all of my videos are there
Lujoooooooo yo igual le puse una a mi ELANTRA
Dónde compraste la carcasa
So the second black plug from the stock radio isnt used? been trying to figure its purpose out for a day now Ty in advance
That is correct, I didn't use it and everything worked as intended.
@@DCAutoEnhancement your the goat dude such a fast reply
@@Dbaker247 I just like to be responsive and help when and where I can. Thanks for watching
Do I have to unplug the power terminal from car battery when I install the new unit??
It is best to remove the negative battery terminal prior to doing and electrical work.
@@DCAutoEnhancement Thank you soo much for answer and all does videos :D I'm still waiting for my android unit to come :)
How have you liked the radio so far
@@Thatonguy548 I no longer have the car but the radio was, for the cost, a great upgrade from the non functioning factory radio. The sound quality was much better than previous Chinese units I have installed in the past. Connectivity to iPhone and Android was good.if you are looking for these features, for the price, I think it's worth it.
Don't do this kind of thing yourself if u are not a technician skilled in it. Pay a specialist. It's dat simple.
Hi bro the camera is necessary? I can still installed without it right?
Your are correct, it can be installed without the camera, I just wanted to show as many features as I could as well as the picture quality
@@DCAutoEnhancement okay appreciated 🙏🏼 👍🏼 💯
Will this work with 2010 Elantra as well?
It will be different. The 2010 model had a slightly different radio shape causing the dash kit to be different, it had a different wiring harness and the antenna wire is not the standard shape which requires and adapter. Aside from those differences, the process will be very similar.
I’m attempting to replace my radio as well but the only problem is i’m getting confused with the wiring. My radio is a single din and much smaller than that stock radio you took out. I have 3 connectors from the old one but i’m not sure how to wire it
Is yours a 2009?
Does that camera work as a reverse camera? Or just dash cam?
It's a back up camera
I will like to do the change but I do not have the Installation Manual. Where can I get it ??
Have you contacted the place you purchased it from?
@@DCAutoEnhancement I got it from Amazone but they do not answer
I needed to connect my phone to my radio real quick for testing, and it kept saying I was driving because I didn't bother setting up the parking brake wire since I don't have it yet... I found that if you tap the parking break wire to the thick black wire coming out of the radio's plug and then hold it, it will think you have the parking brake on, so you can set up android auto before you actually get the wire for the parking brake job.
Also, that vestigial plug made me think I was going to have major problems... Nope! The old radio needed that plug, but the new one only uses one of the plugs (though, it probably uses two of the car's plugs in the wiring harness if you have the 2009 Hyundai Elantra with the second wiring setup that uses 3 plugs instead of 2!)
@@Sputnikcer thank you for adding this info.
Hi thank you for the video :). Just to make sure I understand it right at 6:30 : the color coding is wrong but the connections are correct right? So the parking wire is the last one but it's brown instead of orange is what I understand, same for the green (illumination) which is actually orange but in the correct position?
I believe that is correct. I just remember that the radio harness matches the harness that plugs into the car.
How does the audio sound? Also can I use this exact same radio unit for a 2010 Hyundai Elantra GLS
I was surprised that the sound was decent. As for the 2010, I think there is a different dash kit and wiring.
could you just get the one that just plugs in?
I'm not sure what it is that you are referring to
❤
❤❤❤❤❤❤
What if I don't have those same tools
Which tools are you referring to?
@@DCAutoEnhancement I got it out thanks
How to remove ac control Chevrolet 2018 Antra
Just from looking at photos online of your vehicle, it appears that the trim that comes down the sides of the radio and climate controls and wraps around behind the shifter would have to come off and I am guessing there are screws holding the AC controls in place. I am only making and educated guess though. Let me know if you get it out. or maybe like this: th-cam.com/video/0tq0yWh5tbA/w-d-xo.html
The more I am looking into this, I think it will be more like this video: th-cam.com/video/0tq0yWh5tbA/w-d-xo.htmlsi=CdD8C_FZOilW8-vd
❤🎉
I have the radio Rimoody but I need the instructions to connect all the wires. Help me , please. I can pay for the installation diagrams
Can you give me the model number of the one you bought and I will see if I can find it for you?
@@DCAutoEnhancement I have the following information : Rimoody Y3352 and B091SMG4PT
I wish you were here cause my stereo sound don't work no sound.
I am assuming the radio turns on but no sound? If yes, it's possible you have a blown speaker causing the amplifier inside your radio to not work. Or the amplifier in your radio quit working. Or if you have an external amplifier (which some cars come from the factory like that) and you just installed an aftermarket radio, you need to make sure the blue wire is hooked up on the wiring harness.
I have the same model head unit as you do, with a 2010 Elantra.
Did all the wiring to a thumb, switch on the ignition and no sound.
Remove the aftermarket head unit and reattach the factory 1 and the sound is there, remove it and put back in the aftermarket unit😮 nothing.
I even went out a buy a second 1, thinking I might have damaged the first 1 or something, same problem, nooooo sound, 1 am beyond frustrated!!!
There is a blue wire on the car side harness that has to be hooked up to a blue wire on the radio side. Usually if you don't have sounds, that is the problem.
👏🏽👏🏽
How much is that
$100 plus parts another $20
@@DCAutoEnhancementgreat tutorial🙌🏾 I’m gonna install one in my lady car😁
@@kejuangreene5367 I hope you like it.
❤