Making CNC Machine || 3 Axis Milling Machine || CNC Engraving Machine
ฝัง
- เผยแพร่เมื่อ 10 พ.ค. 2021
- #creativethink #engravingmachine #cnc #milling
i am show about making powerful cnc machine. this machine based on 3 axis. this very powerful and accuracy on this machine.
working Area= 600mm x 400mm
3d printed files:
bit.ly/2Rmptso
Detail,
1.16mm shaft
400mm=2pcs
600mm=4pcs
2. linear bearing (16mm)=12pcs
3.12mm shaft(200mm=2pcs)
4.linear bearing (12mm)=4pcs
5.nema 23 stepper motor= 4pcs
6. 8mm to 10mm shaft coupler=4pcs
7. Lead Screw
400mm =1PCS
600mm =2pcs
200mm =1pcs
8.palm router=1
9.2040 Aluminum Profile(400mm)=2pcs
10. 2080 Aluminum Profile(600mm)=2pcs 200mm=1pcs
11. Lead screw nut (10mm)=4pcs
12. bearing (10mm)=4pcs
-------------------------------------------------------------------------------------------------------------
Components Link :
1. 2040 Aluminum Profile
amzn.to/3ubzIh0
2. 2080 Aluminum Profile
bit.ly/2Rax50u
3. shaft (16MM)
amzn.to/3o8Qcoe
4. LINEAR BEARING (16mm)
amzn.to/3vZYkK7
5. Bolt Nut (m5)
amzn.to/3gTSMNk
6. Palm Router
amzn.to/3eJCJyD
7. Leadscrew (10mm)
amzn.to/3xFj6jR
8. Stepper Motor And Driver
amzn.to/3364pbC
9. shaft Couple (8mm to 10mm)
amzn.to/3t8kXKS
10. Bearing (10mm)
amzn.to/3eJeWio
11. Shaft (12MM)
amzn.to/3nEwujR
12. linear Bearing (12mm)
amzn.to/3vtdur2
13. cnc shield
amzn.to/3gUq274
14. SMPS(24V, 10A)
amzn.to/3vyYCHT
15. Palm Router
amzn.to/3eJCJyD
-------------------------------------------------------------------------------------------------------------
Facebook Page:
m. creativethinkg...
Instagram:
/ creativethinkgr
Twitter:
Creativethinkgr?s=09
TH-cam: / @creativethinkideas - วิทยาศาสตร์และเทคโนโลยี
![อาจารย์ยอด : สวยกินคน [ผี]](http://i.ytimg.com/vi/_-TIJOwkRA4/mqdefault.jpg)
Hi! I believe, 2 motors for axis-X - is too much. Just put one in a middle. And if one has a moving portal, then you can hide shafts under the table, those one can protects bearings from a dust.
no words! This is a marvelous creation with no welding! That's a plus for me.
Was fun seeing these video. Your first cnc looks 100 times better then my first one!
Perfect ! Отлично получилось !
Great job! I like it. I saw this video with pleasure! Thank you.
3d Printing quality was superb and amazing CNC machine
Un travail exemplaire ! Félicitations mon ami !!!
An exemplary job ! Congratulations my friend !!!
It looks good...similar system as Onefinity CNC...I only have one question...why you put small a4988 drivers on cnc shield when you used TB6600 drivers?
A4988 don't have any purpose in that case.
Yes, I was wondering that too.
Because he has no idea what he is doing. Probably he copied the project from an opensource web site
Sorry guys, could you confirm me if A4988 driver modules in this case are still needed ? Using External driver module, those a4988 driver should be un useful.
@@redtag2010 not needed. You May damage card if you attach both
thanks for sharing your creativity and inspiring many of us!
Very talented work 👍🏼thanks for sharing it with us 🙏🏼
This is oddly satisfying to watch - Great project
I wish I had the creative talent you do!!! Nice job!!!
Good job!! I've been looking at the prices for plastic forming machines and I was surprised when I saw the prices for your components, but then I saw the speed that you cut through the 1/2" or 5/8" ply and I understood. Great job.
Hello
best video ever. thanks for sharing your knowledge with us sir
wooo steady this is amazingly sophisticated science. greetings from Indonesia🙏🙏🇮🇩🇮🇩
Such an excellent build!
Impressive.. Really sturdy and well made for a DIY CNC (the best I've seen so far). Kudos for such excellent design and end product.
Can you make me
@@gouravjangid2813 i can lmk
This is onefinity cnc design.
whats the small stepper driver(drv) purpose on the cnc shield when already have the TB6600(or whatever stepper driver it is)?
He absolutely isn't needing any of the small stepper driver boards since he's using the external drivers. He should have left them out.
I was wondering why did he use the A4988c drivers !! and i think he shoud have used 4 tb6600 drivers for the 4 nema23
I would love to have one like this.😁😁 so wonderful
Hi.
I really enjoyed watching the CNC making video.
Which PC G-Code sander program did you use?
I'm using Candle, but the UI looks good to use.
I think this is your best design for a CNC yet.
이런 장비를 만들수 있다는 것이 부럽네요.
Great job brother big like from morocco
This is one of the best and rugged designs I have ever seen. Thank you for sharing. One question, what is the shortest time it takes for the carriage to move from one end to another in both directions? Thanks once again.
it depends on load motor rpm and screw laed
you are genius
Amazing and very creative
Brilliant idea and design perfection!!!!
amazing skill.😍😍
Isso é top hein!
Excellent my friend,cool idée👌 very very nice video😜👊👍
You are awesome Bro, thanks for all your help
What a pleasure viewing your video. Thanks for your great work!!!
All components like sliding bars, pillow bearing blocks, linear bearing blocks, precision threaded rods, end blocks are available from some reputed manufactures like SKF and also some good local manufacturers. May be the end blocks can also be fabricated from steel , al, or solid wood will also suffice. Locking holding arrangement can be made as per anyone's convenience. Total cost in India if checked on line may come to around 70,80 k from branded parts manufacturer or less if locally procured. Of course the accuracy may affect somewhat by local parts and fabrication workmanship quality.
All electronic components too are available online. And programmable aurdino controller cards s too are available online.
It's a good build overall cost effective workable. Thanks for your upload. Gr8 build. Keep it going.
Your 3D prints are excellent. This is a nice clean design. Congratulations.
Excellent job sir.
Very neat built
Very nice and accurate,
Easy to assemble too
This is awesome 👍 You made my day
Excellent DIY.
CNC how much i like very good❤️
Fantastic 👍🎖😅🙋♂️✊✊✊
شكرا انت فنان.
This is realy usefull 👍😘❤
Excelente proyecto. Con esta maquina se podrían fresar piezas de aluminio? (obviamente pequeñas y con las brocas adecuadas). Saludos.
有零件加工的吗？发到中国来，我帮你做，我有cnc
THANK YOU MAN ♥
No limit switches? Brave!
hello, OMG, absolutely brilliant video, this is the best of the best
great work thanks
Very nice work.
Amazing ⭐👍👍
Awesome project and the whole system looks very rugged , one question what type of 3d printing filament was used and how much.
muchas gracias!... espero algun dia pueda hacer un video acerca de la configuracion a detalle entre controladores conexion al pc y puesta en marcha... saludos desde mexico
Thank you that's good idea
who the hell is this guy? he's a freaking genius,,,,dam!!
Two motors on the Y axis is a very good solution. An underrated solution I must add.
Salam sir ap ko nice work
Impressionante!! vc. vende?
Why did you use double drivers?
It should be enough if you used the step, dir and puls of the driverboard
wow, very interesting
Very impressive how much the cost for this machine I like it
Hi there. Looks very good what you have made. A tutorial how to create G-code for the machine would complete that build video ;)
Agus dapat. Jzdì pelaj
@@asdanasdan8941 Sorry, dont understand and automatic translation failed. English, French or German?
Freecad can
Hey love the video, big fan, quick question, how tall are your 3d printed gantry parts?
Super...100% Best...Thx.
amazing
Looks better from previous version
Nice install
I have a machine with LPT,
I did it on arduino uno, the frequencies are low. I also reworked the BSMCE04U board, it works. But now I stopped at an autonomous controller at the ESP32 GRBL, I am very pleased. There is a video on the channel.
What plastic did you print the parts with?
Very impressive. Just a tip: hammer and bearings are ENEMIES forever.
Do you have files 3D printed parts??? For download.
.
.
They're in the description.
Hi very good job I am very interesting latest latest manufacturing
Hello
I think you did a great job. You could tell us how to add end stops for security.
Thank you for your video and your sharing!
Regards
With the stepper drivers he's using there isn't a hardware endstop. He's built it into the firmware.
Beautiful my friend!!!
How much in US dollars did you spend on parts not including the Makita router and the power supply?
Great
Hi Mate,
I am going to carry a steel pallet (overall weight of 700 kg) over rollers with 2 stepper motors on each sides, do you reckon "Nema 42 CNC Stepper Motor Bipolar 30Nm" is enough for this application?
Good job, but you don't need the smaller stepper drivers on the CNC shield (nor the shield itself, tbh!)
Leadscrews are not terminated for pressure. Couplers are not to be bear axial load.
Very nice and good price this Mashine
First of all, my congratulations for the excellent work. I'm starting construction and your idea seems very right to me.
The screws used are all Metric 5, but what lengths?
Excellent project. With this machine could aluminum parts be milled? (obviously small and with the right drill bits). Greetings.
Of course not!
The construction would vibrate so much that even the milling cutters could break.
Try to adding motor oil in drill machine so that it works effectively 😁😁
Me: That's so satisfying
Nice video, keep it up, thank you :)
Good job my dear sir.
can show the software part, programming the ardunio ,teach the home position , also cutting program...thanks
Does it used for graphite ??
здорово. надо бы только ещё доработать на предмет того, чтобы пыль от резки дерева не попадала на валы, а то боюсь линейные подшипники быстро испортятся.
traduzir p o português e dizer onde encontrar todos os imateriais obrigado
Verry impressive project , amazing ,so how much does it cost
How much did this machine end up costing plus the time for the 3D printed parts to be made?
I would like to compare the cost of a unit that is already made, parts found and then all shipped together at the same time.
Even if you list all that is used that doesn't mean it's in stock and then have to wait for delivery. If it's a matter of just loving to put something together, you can order one unassembled.
There's no way this ends of less expensive than a comparable unit purchased with warranty with all the correct parts at one time.
have you found a comparable unit? how much does it cost?
Play for the love of the game... (And bragging rights!!!)
Wow. Installing bearing into 3D Printer plastic material for building an CNC Router...back to school. Clickbaite for Amazon Buying List.
Amazing 👍👍👍👍
Nice work! why do you use 6 driver? if you have 3 axes.
Hi, how are you?
The Nema 23 stepper motor has 3 versions, please which version is used in this excellent project?
Thanks!!
Can PLA withstand the heat from the stepper motors.
can it also be used if I want to use a longer pipe so that the work area is larger? for example for a work area of 122 x 244 cm
what about limit switches?
Don`t ever use a hammer to press the linear bearings in....
How did you connect two motors with one wire
AWESOME....Please give me link of The Software you used...
Nice video...Sir please make a video on higher/improved performance CNC machine something like laser cutting.. I mean all the mechanical parts should be easily available in market and there shouldn't be no 3D parts ( not everyone can make 3d parts, so implementations by viewers will be tough without all parts).