ROUND WALL ART MADE OUT OF SKATEBOARDS!
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- USE THIS LINK TO GET A HUGE DISCOUNT FOR X TOOL P2 CO2 LASER!
bit.ly/3O6fmSM
Check out my Website for plans, products, and merch!
www.woby.design/
BIG SHOUTOUT TO TOTALBOAT! @TotalBoat
www.totalboat....
Check out my Patreon Page!
/ wobydesign
-18 X 10 INCH EPOXY MOLD: amzn.to/3NfXPG8
-TABLE SAW BLADE I USE 90% OF THE TIME: amzn.to/3QQ10Wx
-Safety goggles: amzn.to/3ClxTlf
-Carving disc: amzn.to/3h1oy9U
-LEATHER ARPON BY CALAVARA: calaveratoolwo....
-IRWIN QUICK-GRIP Bar Clamp: amzn.to/2Tk0WkF
For all the songs I used, Check out Epidemic Sound!
Try it for FREE for 30 days!
share.epidemics...
Until next time, cheers.
XO, Ben
Love that you document the struggle. Makes it relatable but also helps us understand the problem solving aspect.
Turning scrap into art. And a risk taker. As well as humorous. Subscriber.
Both designs are absolutely gorgeous 🙌
I really like the smaller one. These would make great tabletops as well!
Enjoyed watching this vid thanks for sharing learned lots. 🌈 (them wallers are awesome … state of the art … )
That sanding track is fire 🔥🤣🤣
One of the most impressive and eye-catching things you've built!
Can't wait to see these new experiments with the epoxy.
Your love for sanding is inspiring 🤩
Love the black circle around the small one! Glad you got the CNC working! They look great!
Love the pattern of the big one, has a certain MG Escher vibe to it!
The pattern that looks like fish scales is cool. Koi!
love this build man! Great job
Love your videos
I'm digging the pattern on the smaller one, it's really aesthetically pleasing, but they're both awesome. Great work, as always, dude.
Luv your work hands up great!! On your pours you need to torch the bubbles out after a few minutes let them come to the top torch again then let it cure. That would solve a lot of the bubble problems.
Every woodworker loves sanding! We have to.
Love your vids, you are the best wood creator I didn’t know I needed. Keep up the stellar work. Inspirational
those tiles remind me of fish scales. That would be cool if you made a big koi wall are or something out of them.
You do some very cool stuff dude! A little tip for fitment gaps, glue on some edge-banding before you do you glue up to take up the gap all the way around the insert. Cheers!
Looks great! Nice way to do something with those scraps
flipping outstanding!
Yas the methylated spirits or alcohol spray works and doesn’t create any heat for the reaction 😊
First - great work as always, they look amazing and I love seeing your process.
To your laser comments, *YES* you should get more ventilation on your laser exhaust. I worked in a shop where we were running a laser nearly constantly, mostly on plywood, and the smoke from that is nasty for both your shop (stains on the walls) and your health. There's both the wood itself and all the glue that holds the plywood together that's getting in the air. We were primarily etching, which puts off more smoke than cutting, but the health aspect is the same.
It's also worth checking the exhaust hoses and pipes every once in a while as the glue can build up and constrict them, causing it to get out into the space more. Cleaning the attachment points is pretty easy and hoses can be replaced but, since the buildup mostly happens around the connection points, you may not have to do a lot of replacing.
Both look amazing. If you are looking into doing anything leather related with your laser, definitely do do after the vent if figured out. You'll see smoke but it also smells a bit like burned hair😅
Awesome as always :) WoooooHooooo!
do you ever do wood working projects with “regular” wood? seems you could make cool furniture pieces. i’ve seen some other people making cool stuff from pallet wood.
Very cool Ben
Another great project I’m so fascinated by your used to the skateboarders and the patterns you come up with. For your laser event there are 12 V fans that look like they go in computers or computer and stuff. You can get them up to 8 inches in diameter and just put it in the ductwork and let it suck at home through, just an idea I thought of it sitting on the couch watching you work. Have a good day.
Beautiful!!!
There we go!! 16:51
Siiick!
There we 10 Woby-claps in this video.
Ben: "I hate sanding" _works with wood_ XDDD Maybe he needs a vacuum pot to get the air out of the resin before pouring.
a simple inline fan will sort the smoke out
Be careful with the alcohol because if you spray too much it leaves a oil slick pattern on the resin otherwise use a butane torch it doesn’t heat up your resin and doesn’t have any bad effects
I was so confused and looking around to see who was whistling the entire time!
I wonder if you could laser off the graphic on the bottom of the board? Would probably need a final sand after, but it might not be as much work.
I followed this struggle on IG, so i know the pain you had with it. They both turned out great and I'm torn trying to pick a favorite. I love the geometric design with the trapezoids, but the fish scales look really cool too. Genius move laying out the parts like you did for the laser cutting. Maximize output and minimize waste. Awesome project! Hope you feel better soon and thanks for sharing!
The moongels... 🥁🪕
Whoa Bee
been taking lessons from mister miagi. "epoxy on, epoxy off"
Awesome!! DD
Can you make a pair of sunglasses frames ?
I have a similar laser and rather than paying for “laser exhaust fan” I bought a bathroom exhaust fan, it is for 3 bathrooms, so much better at 10% the price. And no noise.
Just curious, what type of epoxy do you use?
😂
What type of orbital sander is that? Love your work!!
Mirka.
Broo, looks sick as fkk
How do you calculate the angle and length of the pieces of your border so when you round it over it fits your circle? I need to do this myself and I dont know how to calculate it.
Dude these are stunning I actually prefer the smaller one. More chaos. Would be interested see if u could do a chopping board/serving board with the recycled skate boards?? Looks amazing great video. I've emailed u get InTouch!! May be able help. 🏴👍😊
love when you scream ... do it more... it's perfect when I have my headphones ...
I’ve been to the skate parks and skate shops and no one has scrap boards. Any chance I could get them from you? The same parts you used for this project? I’d love to try it out.
Ben: I hate sanding
Also Ben: I spent several days on end sanding to make this entire stack of veneers.
Also Ben: Then I started a side project which the waste material requires even more sanding.
Grab an ac infinity fan 6 in model and the smoke will be gone. Just remove the factory fan when you install the new one.
I’ve seen other YT creators use a spray can of something to get air bubbles out.
супер
A lot of waste because line could have been done once without nesting gaps. Can put the pattern on the pieces and remove overlapping lines.
Is it safe to laser epoxy??? I know that you need to be VERY careful what materials that you laser because it can create deadly fumes. I thought that it is NOT safe to laser epoxy resin and doing so can release hydrogen cynanide!!!
If it is actually epoxy and not polyester resin, then yes, it's possible that cutting it is creating HCN. It's probably a pretty small amount of epoxy though as it would only be a thin layer between the boards. Still something to think about though!
Especially considering the lack of air filtration in that particular studio…
Ok So = Oh Queso
Lol
Ok, so.
Why don't you steam the decks then lress them flat, all tis work almost zero yeild😢makes no sense.
Why does he keep screaming ~ silly human!
Please, please, please, invest in some PPE equipment. It’s extremely unsafe to handling uncurled resin(epoxy) without gloves and a filtration mask. Not to mention all that wood dust that collects in a wood shop. You should be using an n-95 mask anytime your creating substantial sawdust.
Not only I am concerned for your personal health and safety here, but I am also concerned with how your casual treatment of safety protocols will affect your audience.I know that while many videos showcasing the process of building something are meant solely as entertainment and are not meant to serve as tutorials or examples, that many people use them as such anyway. And it seems pretty imprudent to not even include any disclaimers about what behaviours should not be modelled by viewers.
I want to assure you that my comment is not meant in disrespect to you and your craft, but simply because I am finding it difficult to fully enjoy watching your video process without having constant concerns over your health and safety. Please take care. 🩷