Definitely made me think of being at a dirt track, didn't sound bad though, but it's definitely something no one else is sporting right now.. as usual great content.
We used to run glasspacks and get them real hot , then spray cold water from garden hose up inside them , the fiberglass cracks like hot water on ice then it breaks down fast and gets a lot louder and given time they are basically a straight pipe that looks like a muffler
Hey man, love the vids and the trucks. This will probably be my last video I watch for a while, headed off to basic training and AIT. Good luck to you and the fam. Looking forward to the content when I get back in February. Good luck brotha.
my ol sbc 350 shot some killer flames, exhaust ended almost exactly where yours does.. This don't sound too bad on camera either. It's a good different.
Just goes to show ya , you do t need to spend big money on a performance muffler to sound good. That cammed V8 is what makes the difference in sound in my opinion.
😂😂😂 I've thought about this same thing on my Sierra, they keep poppin up on my amazon. Surprisingly it does sound good. Hook the rear pipes up and it'll get better.
lmfscrew brother that is super hilarious hahaha 😆. I would seriously love nothing more than to see what some out the side both sides in front of the tires both sides done with those style tips or even some chrome squres🤔🫡😏🥴
Bud I got a set of 11” and a set of 18” sweet thunder mufflers collecting dust in my garage. They are 2.5” so you’d need adapters, but I’ll send you either set if you’re down 🤷🏻♂️
It would be awesome if you could find an exhaust system that actually go for chimper that would make it like this system does bcuz it sounds so good and shoots huuuge flames 😂👍🏼
Would like to see an update on your wheel & tire setup and how chomper is riding. Are your bump stops or upper control arms bottoming out with the level kit & 35s?
How well do you like the clamps vs weld? Any noticeable likes or dislikes vs welded I would like to do some new set ups for the 8.1 I go back and forth on wanting clamps and getting it done or not done because no welder ... It's a struggle haha.
Try 21/2 to 3 inch all the back true dual i dont get why they put a y pipe and 225 pipe back instead off 3 inch I got that with no cats sounds nice I got 40s on mine going to change it up sometime
It actually sounds really good. Just the sound of that truck idling is absolute perfection.
V8+diesel=music.
Definitely made me think of being at a dirt track, didn't sound bad though, but it's definitely something no one else is sporting right now.. as usual great content.
Why does that actually sound sick 😂😂great vid man as always 🙌
Chopper soundin amazing as always
It sounds pretty damn good, awesome content as always 🤘
Damn son that sounds good 🫡🫡I didn’t think it would sound that smooth but sheesh, love it
We used to run glasspacks and get them real hot , then spray cold water from garden hose up inside them , the fiberglass cracks like hot water on ice then it breaks down fast and gets a lot louder and given time they are basically a straight pipe that looks like a muffler
Hey man, love the vids and the trucks. This will probably be my last video I watch for a while, headed off to basic training and AIT. Good luck to you and the fam. Looking forward to the content when I get back in February. Good luck brotha.
Sounds pretty good actually. Need to try the borla ataks on it
im actually early for once😧
These videos are awesome lol. It does sound really good!
Man thanks to your videos I came across the BlackBear turner and I decided to go with them. Can’t wait to get the tune!
That sounds great. Love it
The cateye lookin good in the back 😎😎
Love the content man keep up the great vids love all the trucks
Thanks man!
Keep up the good work 👍.
Should do Black widow "neighbor hater" they say that they are louder than glass packs
Yeah he really should
LED Reverse Lights! Those flames are dope n it sounds good.
Best the truck has ever sounded
Sounds good and looks cool
Sick ass truck! Subscribed!
my ol sbc 350 shot some killer flames, exhaust ended almost exactly where yours does.. This don't sound too bad on camera either. It's a good different.
Definitely flow masters
🔥 🔥 🔥 I don’t like the look but I do like the sound!!!
Nice sound. Maybe i will do this to my Z71 Silverado
Borla xr1 oval mufflers sound great
I would love to see dynomax race bullets next please 👍👍
Sounds good
Just goes to show ya , you do t need to spend big money on a performance muffler to sound good.
That cammed V8 is what makes the difference in sound in my opinion.
I run a river can in my v8 cam 5.3 and I still get compliments also has a 4 inch turn down.
X pipe and flow masters
Sounds awesome 👏.. would love to hear some race venoms on it
It sounds good
Try SpinTech Please!
Black widow mufflers are awesome they would sound amazing on your truck. I am surprised with the fart can muffler. Great video!
Same here !!! Black widow neighbor hater is what I run it’s amazing
YESSSS!! Just got a black widow race venom with a y pipe into duals today. On a 2013 chevy silverado 1500 5.3. Sounds incredible!
😂😂😂 I've thought about this same thing on my Sierra, they keep poppin up on my amazon. Surprisingly it does sound good. Hook the rear pipes up and it'll get better.
Some flow master supper 10 would sound so good
You should try paradox mufflers,best sound I've ever heard.
Black widow race venoms with long tubes on a 5.3 sound amazing
You should do two flowmaster outlaws
Would love to see Flowmaster next
lmfscrew brother that is super hilarious hahaha 😆. I would seriously love nothing more than to see what some out the side both sides in front of the tires both sides done with those style tips or even some chrome squres🤔🫡😏🥴
just subscribed💪🏼💪🏼
Steel wool shoved in a tall boy can and poke holes in it everywhere, surprising difference
They're basically just shiny glasspack mufflers. Just like the Cherry Bombs, there's just enough sound cancelling to take away the cackle/rasp.
Bud I got a set of 11” and a set of 18” sweet thunder mufflers collecting dust in my garage. They are 2.5” so you’d need adapters, but I’ll send you either set if you’re down 🤷🏻♂️
Neat!!!
Carven R series race mufflers
I feel like boom tubes would sound great.
i have spintech pro streets on mine and they sound amazing. you should try them
It would be awesome if you could find an exhaust system that actually go for chimper that would make it like this system does bcuz it sounds so good and shoots huuuge flames 😂👍🏼
Yeah let’s see it with a flow master
Blackwidow widow maker 10s next their nasty! I got them on my ls swapped square
Mint.
Now that youve got rid of your spare. You need Train Horns wirh the mount kit that goes into the spare gire area. Then some type of bed cover
I think your on to something here your gonna be the first person to pull this off
True dual. X pipe. 2 vibrant resonators
Would like to see an update on your wheel & tire setup and how chomper is riding. Are your bump stops or upper control arms bottoming out with the level kit & 35s?
😮what bump stops😂everyone cuts them off with levels
Try Corsa and add long tube headers...chopper would sound so sweet.
How well do you like the clamps vs weld? Any noticeable likes or dislikes vs welded I would like to do some new set ups for the 8.1
I go back and forth on wanting clamps and getting it done or not done because no welder ... It's a struggle haha.
And let’s see more Larry content!!
This is your sign to throw borla XR1s on now lol
Imma try this on mine now😂😅
I'd try some Flowmaster outlaws next
Yooo that edit was fuckin awesome
You need to put 3” tubing on it. Some black widow 10… and she would sound great
sounds like Borla, because that's what borla uses, just in-line, not dumped.
Would absolutely love to hear cherry bomb extremes
Need some carven rs they really bring the chop out
Toe spread ankle twist song at the end..
Listening to it with the ricer mufflers sounded like I had my phone up to a pillow and I was on the other sode
He said straight up dirt track car 😂😂
Do a chomper detail vid!
What you want for the old exhaust off Chomper when you put the new one on ? I need some to run out the back
Side exit out of the bed !!! Would throw some flames
run duals off the headers with an xpipe and some black widows
why do they sound that good...
Flowmasters 10 series sound great on a 5.3
yessirrrr
Please try flowmaster 40s next
try flowmaster supper 10!!!! my favorite
love me some chomper!
Turn it out infront if the rear tire and keep it if you like it
Try the glass pack then those mufflers
Try spintech mufflers and or blackwidow mufflers
You should put a flame kit on chomper
Black widow neighbor haters next
Try 21/2 to 3 inch all the back true dual i dont get why they put a y pipe and 225 pipe back instead off 3 inch I got that with no cats sounds nice I got 40s on mine going to change it up sometime
First🫶🏼
Try Vibrant bottle resonators
Try flowmaster super 10s, got them on mine true dual with turn downs, cammed 6.0 idle is very choppy
I suggest with the fart cans on to change the 2step rpm and see if it will shoot flames back to back like a Supra or some shit😂😂
Maybe a side exit next
time for another headliner tutorial
Look up sweet thunder exhaust I have 2 18inch sweet thunder mufflers on my 2500HD 6.0 sounds fucking amazing
Truck needs a circle d 3200 stall. That would make a huge difference in how it drives.
Hey I was wondering when you did your cam what cam did you put in and did you do more flowing injecters
Try a cheap stock muffler with holes cut in it
For the lols
Now get some more pipe and a nice tip and run out the back. It will change the tone and sounds even better.
You need some black widow race venoms