How to replace HEADLIGHT ASSEMBLY (headlamp) on Hyundai Santa Fe 2013-2017

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ต.ค. 2024
  • This is a fast-paced tutorial for replacing the headlight assembly (sometimes referred to as headlamp or housing) on a 2013, 2014, 2015, 2016, and 2017 Hyundai Santa Fe. The vehicle shown in this video is equipped with the optional HID headlights and auto leveling. Make sure you are aware of your lighting package before you order your parts!
    To replace the headlight bulb itself you do not need to remove the complete assembly. But removing or replacing the HID ballast WILL require the removal of the complete assembly.
    This can be a costly service at the dealership due to the labor involved in removing the front bumper cover (sometimes referred to as the front facia). You will need to replace the front bumper cover to replace a broken or bad fog light (fog lamp).
    Here is a link to the headlight assembly I installed in this video
    amzn.to/2vmGRBE
    I always perform repairs according the factory service manual. You need to have all the information (toque specs, testing procedures and schematics) to insure you've pinpointed the actual problem and to insure your vehicle is safe after you've completed your repairs. You download high quality factory service manuals here: shrsl.com/1llp5...
    Here is a list of tools I use in this video in order of which they appear (links are for similar tools):
    10mm socket - amzn.to/2NGZJkg
    #2 Phillips screwdriver - amzn.to/2Nq8gtd
    12mm socket - listed in kit above
    I use an electric ratchet in this video instead of a standard ratchet. It is not required to use an electric or air ratchet for this repair but it definitely cuts down on repair time. Here is a link to an affordable electric ratchet - amzn.to/2GxwSvU
    Lightning Fix is a fast-paced DIY repair series meant to guide people though repairs in a quick and effective manner.
    Follow me on instagram @ / garretseesi. .
    You can listen to my original music on soundcloud @ / user3041617
    #Hyundai #SantaFe #LightningFix

ความคิดเห็น • 49

  • @sarang7043
    @sarang7043 2 ปีที่แล้ว +2

    Thank you. Just finished replacing my headlight assembly. This was the only such video on TH-cam. Could not have done it without you great instructions.
    Thank you again.

  • @RustyGlovebox
    @RustyGlovebox 4 ปีที่แล้ว +6

    Nice work and make it look easy. Long gone are the days of the old 7 inch round headlamp with 3 or 4 screws holding it in.

    • @Scooter_911
      @Scooter_911  4 ปีที่แล้ว +1

      Hahaha TELL ME ABOUT IT

  • @heathboyles4396
    @heathboyles4396 4 ปีที่แล้ว +4

    I just used this video to replace the front headlights. Super video. I appreciate the help!

    • @Scooter_911
      @Scooter_911  4 ปีที่แล้ว +1

      Glad it could help you out!

  • @joespencer2732
    @joespencer2732 2 ปีที่แล้ว +1

    Great video. Now I know what I have to do to replace the headlight. Thanks!

  • @nickreiso4185
    @nickreiso4185 3 ปีที่แล้ว +2

    I have a 2018 Santa Fe and i wanted to put in better headlight bulbs....i tried to change them but i cant get my hands in back of bulb. So people have told me the bumper needed to come off a d i was hesitant to try..
    Looks easy peesy.👍

    • @justusdurbin7420
      @justusdurbin7420 4 หลายเดือนก่อน

      2017 Santa Fe here I just had a headlight go out and had to do the same thing just said meh and replaced all of the bulbs while I had the bumper off

  • @derricksmash
    @derricksmash 4 ปีที่แล้ว +4

    Thank you so much. After way too much hunting for bumper removal (need to replace lower bumper cover), and seeing this video in search results numerous times, I finally decided to click on it hoping to see some portion of bumper removal. Sure as shit, it's the first thing you did. Thanks so much. Do you take tips? 🤣

  • @basicdetail4512
    @basicdetail4512 6 หลายเดือนก่อน +1

    Excellent video brother

  • @scurve099
    @scurve099 8 หลายเดือนก่อน +2

    You do not have to remove the entire bumper just to replace the headlamp assembly. However this is still a great video for the front bumper removal and acess to the fog lamps.

    • @oldmanpbotty3141
      @oldmanpbotty3141 5 หลายเดือนก่อน +1

      I was like wtf. Why remove the bumper??

    • @justusdurbin7420
      @justusdurbin7420 4 หลายเดือนก่อน

      On this model you do I own one and the headlights are in there good

  • @newideasinmind1216
    @newideasinmind1216 3 หลายเดือนก่อน

    I don't have fog lights on my hyndai santa fe sport 2014 i only one set of wires to plug in, the new lamp i purchased has has two different areas to plug in electricaly this new headlight only dim l lights work at the top, the main lights will not go on what should i do ?

  • @abrisenoa
    @abrisenoa 3 ปีที่แล้ว

    Hey Garret.....How r u ??....I own a 2019 Tucson , and I have a condensation troubble in one of the headlights....it doesn't seem like broken or something....so..I think that I have to take it out to check it.......the question is.....I have to do the same process ?? I mean...take the bumper out too ??

  • @carpenterdelatorre
    @carpenterdelatorre 10 หลายเดือนก่อน

    Gracias 👌🏼
    Tu video fue de mucha ayuda
    Cheers 🤙🏼

  • @TrayTheGaint
    @TrayTheGaint 4 ปีที่แล้ว +2

    Hi there, quick question? If I only want to replace the fog light bulbs can I just swap them out by accessing the panel from the bottom? or do I have to remove the full front panel? thanks

    • @Scooter_911
      @Scooter_911  4 ปีที่แล้ว +1

      You should be able to just do it from the under side without removing the bumper

    • @TrayTheGaint
      @TrayTheGaint 4 ปีที่แล้ว +1

      sweet thanks so much

  • @petermahan7179
    @petermahan7179 3 ปีที่แล้ว +2

    Is this about the same for a 2013 Sante Fe Sport?

  • @Mtorano
    @Mtorano ปีที่แล้ว +1

    Great thank you!! Any beam adjustment needed?

    • @justusdurbin7420
      @justusdurbin7420 4 หลายเดือนก่อน

      No the 3 screws on the top and the latch pins underneath the bumper area auto aline

  • @SedapMalam_44
    @SedapMalam_44 3 ปีที่แล้ว

    Hi, can advise where is the hi beam fuse located ? My right hi beam doesnt work properly but i checked the bulb is good but the wire doesnt have electricity.

  • @TexasJaz
    @TexasJaz 3 ปีที่แล้ว

    2013 santa fe. (Stupid H11B bulbs that even O'Reilly didn't have in their catalog). The high/low gears appear to be out of sync so when I raise the low beam, the high beam is now pointing at the roof of that 2 story house...UGH. Is there a way to correct this issue? Also do you have a video on removing the H11B socket and rewiring to a H11?

    • @lunchie80
      @lunchie80 2 ปีที่แล้ว

      Every car has manual adjustment screws on the headlight. If you looked at all you'll have seen up/down etc written in the black plastic. Funnily enough, they are for aiming each light... 🤦🏻

  • @ryankidd843
    @ryankidd843 2 ปีที่แล้ว

    Do you know if its possible to replace the fog light assembly once you have the front bumper cover is removed?

    • @lunchie80
      @lunchie80 2 ปีที่แล้ว

      Of course it is. How else would you do it? It's literally attached to the bumper 🤦🏻

  • @joseescorza1134
    @joseescorza1134 4 ปีที่แล้ว +1

    Do you have to remove the whole front clip?

    • @Scooter_911
      @Scooter_911  4 ปีที่แล้ว +2

      If you are trying to remove the whole assembly yes. If you just want to change the bulb, no

    • @joseescorza1134
      @joseescorza1134 4 ปีที่แล้ว

      Garret Seesing alright thanks. I was trying to and was having no success. Now I know it has to completely come out.

  • @truckjoe
    @truckjoe 3 ปีที่แล้ว

    Need help with the 2019 if anyone could link a video for this same procedure just with a 2019

  • @sonyaeick6028
    @sonyaeick6028 4 ปีที่แล้ว +3

    2:52 that dog.

    • @Scooter_911
      @Scooter_911  4 ปีที่แล้ว

      Hahaha good eye!

    • @indiesays
      @indiesays 4 ปีที่แล้ว +1

      Garret Seesing im always lookin fo dat ass.

  • @davidisordia7575
    @davidisordia7575 4 ปีที่แล้ว +1

    What happened to the Corolla

    • @Scooter_911
      @Scooter_911  4 ปีที่แล้ว +2

      Still working on it! New video coming soon!

  • @shannonquintana6958
    @shannonquintana6958 4 ปีที่แล้ว

    What happen to the Kai rolla

  • @bongdelosreyes6777
    @bongdelosreyes6777 2 ปีที่แล้ว

    We got the same car, i need to replace both foglamp assembly. The DRL on the driver side is busted.So i thought instead of replacing just one, i will replace both to have even brightness when installed.

    • @lunchie80
      @lunchie80 2 ปีที่แล้ว

      Or watch the diy repair videos. They have resistors that fail. Fiddly job but nearly free to fix. Better than $600 per light

  • @CTE-6000EagleVeryHeavyFighter
    @CTE-6000EagleVeryHeavyFighter 4 ปีที่แล้ว

    Nice vid.

  • @AzeezOverseas
    @AzeezOverseas 4 ปีที่แล้ว +1

    Where's the Kai rolla ?

  • @sarathlal007
    @sarathlal007 2 ปีที่แล้ว

    THIS HEADLIGHT ASSEMBLY IS VERY COSTLY I THINK

  • @eddiefromaz
    @eddiefromaz ปีที่แล้ว +1

    Lol. You don’t have to take off the front bumper assembly.

  • @p.h.various7508
    @p.h.various7508 7 หลายเดือนก่อน

    So, basically, I have to rip the entire front of the car off to change a light. I’ll be selling my 17 Santa Fe. What a Ludacris Design.

  • @f1f278
    @f1f278 2 ปีที่แล้ว

    Music....NO BUENO