Milo is such a pro. I Love his mind and of course smooth on for being such great suppliers and supporting people like Milo and sharing it all with us. It helps our work too!
I just followed along with your video and did a mold of a bear skull I had. It was my first time to make a mold, and it came out amazing! Thank you for such a great video and your guidance! I also love the epoxy dough hard shell material… what strange, fun stuff!
This is a high complexity mold 😮. Milo, your skill and technical knowledge is admirable 🙌. It's clear that there are no limits to Smooth-on products ⭐. Thank you very much Milo for sharing your techniques with us. I'd like you to make a video where you show us the use of rigid materials such as the Smooth-Cast 380, 385 and the EpoxAcast line.
Excellent video! Odd question, if I wanted to return the skull to the wild after making a mold, would the materials (such as the wax used to seal up the skull) have a negative effect on the surrounding environment?
Hello, you will want to fully clean the wax off the piece fully before returning it to the wild. If you reach out to our technical support team they can help you find the right materials for your project. www.smooth-on.com/support/ticket/add/agree/
really love this! I have the top half of a deer skull that I found while walking in the woods near my house. I would love to make a mold of it. :D This will really be helpful. - Heidi
Thank you for this video series! I'm just wondering why Sorta Clear 12 was used for the jaw mould instead of Dragon Skin 10 NV, as they are similar in durometer.
Hello, your tutorial is very detailed, so that I can follow your steps as a beginner. Thank you very much for your video, which made me learn knowledge. In addition, I would like to ask you a question: if I want Make a model of a dinosaur skull. Its structure is different from that of a bear. Its upper jaw has a left and right through cavity. If the mold is made into upper and lower parts, there will be a horizontal line locked. May I ask this question? How to solve it, or can you make a video to reproduce a dinosaur skull.
Did you need to put the product in a vacuum chamber to remove air bubbles before you poured it? Or does the product have a low amount of air bubbles to deal with and they won't show in the cast of the subject.
I'm here to assist with Smooth-On customer support related inquiries only. If you have any questions about Smooth-On products or materials, feel free to ask!
Milo is such a pro. I Love his mind and of course smooth on for being such great suppliers and supporting people like Milo and sharing it all with us. It helps our work too!
Thanks for watching! 😃
Yay! Bones & crystals & fossils, oh, my! :)
I just followed along with your video and did a mold of a bear skull I had. It was my first time to make a mold, and it came out amazing! Thank you for such a great video and your guidance! I also love the epoxy dough hard shell material… what strange, fun stuff!
Thanks for watching! Great to hear about your success! 😃
I HAVE BEEN WAITING FOR THIS VIDEO THANK YOU FABULOUS HUMANS OF PLASTIC
Thank you for watching! Don't forget to subscribe!
@@smoothon I've been subscribed to you guys for like ten years!! ❤️❤️
Thank you!
This is SUPER COOL
Thank you for watching! Don't forget to subscribe!
@@smoothon Already am :)
This is a high complexity mold 😮. Milo, your skill and technical knowledge is admirable 🙌. It's clear that there are no limits to Smooth-on products ⭐. Thank you very much Milo for sharing your techniques with us. I'd like you to make a video where you show us the use of rigid materials such as the Smooth-Cast 380, 385 and the EpoxAcast line.
This is a great idea! We will forward it to our video team.
Good work thanks
Thank you for watching! Don't forget to subscribe!
Can you provide a list of all the products you used please?
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Excellent video! Odd question, if I wanted to return the skull to the wild after making a mold, would the materials (such as the wax used to seal up the skull) have a negative effect on the surrounding environment?
Hello, you will want to fully clean the wax off the piece fully before returning it to the wild. If you reach out to our technical support team they can help you find the right materials for your project. www.smooth-on.com/support/ticket/add/agree/
really love this! I have the top half of a deer skull that I found while walking in the woods near my house. I would love to make a mold of it. :D This will really be helpful. - Heidi
Thank you for watching! Don't forget to subscribe!
Free-form Air is a lot of fun, but the fumes give me a headache. Are there any alternatives for people sensitive to chemicals?
duoMatrix NEO is a polymer gypsum which may be of interest to you. www.smooth-on.com/products/duomatrix-neo/
I love how easy it is to mix up... way better than using bandages and less mess
Thank you for this video series!
I'm just wondering why Sorta Clear 12 was used for the jaw mould instead of Dragon Skin 10 NV, as they are similar in durometer.
Dragon Skin 10NV was used because it has a slightly lower durometer than the Sorta Clear 12.
Hello, your tutorial is very detailed, so that I can follow your steps as a beginner. Thank you very much for your video, which made me learn knowledge. In addition, I would like to ask you a question: if I want Make a model of a dinosaur skull. Its structure is different from that of a bear. Its upper jaw has a left and right through cavity. If the mold is made into upper and lower parts, there will be a horizontal line locked. May I ask this question? How to solve it, or can you make a video to reproduce a dinosaur skull.
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Did you need to put the product in a vacuum chamber to remove air bubbles before you poured it? Or does the product have a low amount of air bubbles to deal with and they won't show in the cast of the subject.
Some silicone rubber does require vacuuming, check the technical bulletin for the material.
Would you be able to use Fiberglass rather than free form air?
Yes you could
does the sonite wax come off the model easily?
Sonite Wax can be removed using 99% isopropyl alcohol.
Здравствуйте, это у вас пластилин или глина, 11:10 ?
Oil based clay, called Sculptex.
Milo! Can you show how to make proper mold for big bolt and screw (36mm bolt diameter). Using mold max 30 plz, i dont have another one =)
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
What are you using to spray over the CA glue right after you make the CA application?
That is a CA glue accelerator.
Can you reuse the clay that was sprayed with Ease Release?
It wouldn't be recommended.
We need to talk about that flux capacitor...
We got that autoclave on October 21, 2015
You wouldn't be selling any of these molds? 😆 I don't want to put wax and wax into the one skull I do have because I'm worried about ruining it.
Thanks for watching Nika. We do not provide moldmaking services, but we do have a list of moldmakers on our website: www.smooth-on.com/moldmaker/
Looks like a baby bear.
C est de la merde !!
I'm here to assist with Smooth-On customer support related inquiries only. If you have any questions about Smooth-On products or materials, feel free to ask!