Eliminate Sagging in your 3D Prints
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- Sponsored by: Creality3dOffi... by Comgrow
Chuck shows you how to get rid of filament sag in your 3D prints. He shows you a simple trick you can do to prevent the filament from sagging on just about any design in this week's Filament Friday.
CHEP Cube Ornament plus Filament Friday V5.2 Good (0.20) Cura Profile:
thangs.com/fil...
Ender 3 Neo:
bit.ly/3QDhrEN
**** Creality Ender 2 Pro ******
Creality Official Reseller Comgrow: bit.ly/3tnLuHn
Amazon: amzn.to/3sLuSaW
Ender 3 V2 Neo:
bit.ly/3A4iXbU
********* $3 - Ender Style Cura Profiles Download Links: *******
Latest V5.x Profiles: rb.gy/5k981c
TPU Profiles: shorturl.at/V08bk
PETG Profiles: shorturl.at/RLEfI
(Free to Patreon Members)
**** Support the Channel *****************
Financial Support through Patreon:
/ elproducts
******************************************
***** Tools *****
Filament Friday E-Leveler 2 for Bed Leveling:
amzn.to/3Yz3Vc2
Filament Friday Tool Kit:
amzn.to/2MOR00X
Filament Friday E-Leveler 2 for Bed Leveling:
amzn.to/3Yz3Vc2
Nozzle Removal Tool:
Palm Ratchet: amzn.to/3u6ncm7
Premium Version: amzn.to/3KZox4t
1/4'' Socket: amzn.to/2OjdHdg
***** Popular Prints:
CHEP Cube Test Print: social.thangs....
CHEP PTFE Cutter Tool: social.thangs....
CHEP Pawn: social.thangs....
***** Creality Ender 3 Pro: *****
Creality Official Reseller Comgrow: bit.ly/2SIMa86
Bundle From MatterHackers: bit.ly/2FuKFpu
***** Creality Ender 3 V2 ******
Amazon: amzn.to/3ioLVsC
Banggood: bit.ly/2MQ5VGM
Creality Official Reseller Comgrow: bit.ly/30gh9OD
***** Creality Ender 3: ******
amzn.to/3fSIISy
Creality Official Reseller Comgrow: bit.ly/2sEthbX
Bundle From MatterHackers: bit.ly/2ZvGLnE
***** Creality Ender 3 Max *****
Creality Official Reseller Comgrow: bit.ly/3oXr3wi
Amazon: amzn.to/3p0oYzB
Direct Support through PayPal donation:
www.paypal.me/...
Support the Channel here and Shop at MatterHackers.com and you automatically donate to the channel at no cost to you:
bit.ly/1Ugcijp
Buy thru this link to Slice Engineering for the Best Hot Ends and get 5% off your purchase:
www.sliceengin...
************************************
***Creality Ender 3 Parts/Upgrades ****
Ender 3 Glass Bed:
Amazon: amzn.to/3tYea7m
Replacement Nozzles for CR10/Ender 3:
amzn.to/2m39K1y
X-Axis Tensioner
amzn.to/38BKbYP
Y-Axis Tensioner
amzn.to/2PhOdhi
Chuck's Favorite EZR Extruder:
bit.ly/2rlKCpp
Creality 8-bit Silent Stepper Board: amzn.to/2YPM0Nh
Cap Tubes & Couplings: amzn.to/2Vf8BCf
CR10/Creality Ender 3 Nozzles: amzn.to/2m39K1y
CR10/Ender3 Silicon Heater Block Cover: amzn.to/3sfDG7s
Solder Sleeve Kit: amzn.to/2Pqqngm
Creality Ender 3 Fan Set (24v): amzn.to/38u9aOl
CR-10 Fan Set (12v): amzn.to/2PrcCxK
T-Nuts Kit: amzn.to/2LsQZg8
Screw Kit: amzn.to/2Va8uGK
Temperature Meter Used in Videos: amzn.to/2JpUJOC
Screwdriver set used in Videos: amzn.to/2PbWocM
Creality Ender 3 Upgrade Package (Extruder, Silent Board & Capricorn Tubing): bit.ly/2MNvmcs
********* $3 - Ender Style Cura Profiles Download Links: *******
Latest V5.x Profiles: rb.gy/5k981c
TPU Profiles: shorturl.at/V08bk
PETG Profiles: shorturl.at/RLEfI
(Free to Patreon Members)
**** Support the Channel *****************
EBAY USA: ebay.to/1wtxfiU
EBAY UK: ebay.eu/2qdC5iy
EBAY Canada: bit.ly/2qdGRwh
Note:
As an Amazon Associate, I earn from qualifying purchases.
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Chuck's Arduino Book:
amzn.to/3tA31JP
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.
Note: For those suggesting the Experimental Make Overhang Printable,
I don’t like how big it ramps everything including the top of the letters that already printed well.
It can really change the look.
So I chose not to use it and will make a separate video in the future.
you KNOW this is up top for a reason! HA!
Cura has a setting called "Make overhang printable". You can do the same thing just by checking one Box.
Is this available with prusaslicer?
@@alixezman1106 probably something similar but idk
On what slicer?? Simplify 3d doesn't have that "box"
It uses a much bigger ramp though. Or maybe the inclination is adjustable? I haven't looked..
@@karlnygren yes, you can change the angle of the ramp. I think the default is 50 degrees; if you want less ramp go higher - 90 degrees would be no ramp.
I run into a problem and coincidently you put out the best video to fix it. Your the man!
This was a great tip for designing any type of 3D printable object! I love your short, to the point, informative videos. Keep it up! Merry Christmas Chuck.
Yes move vids like this please! Design tips and tricks are always needed whether it's tinker cad or fusion 360. Bring us more design tips!
I believe Cura has a standard option to do this automatically. There’s a check box for “Make Overhangs Printable.” But your method likely makes the overhangs much less noticeable.
is that what it means in cura?!
Battery and LED holder, freaking brilliant! Nice job!
Isn't this what "make overhangs printable" in Cura does?
USING THAT CONDUCTIVE FILAMENT to make a washer as a resistor between the battery and l.e.d. would be a good application.
Great tip 👏
Great suggestion on how to fix the sags. Merry Christmas to you and your family.
Just when I think I have learnt everything you upload a new video and I'm back at school again 😆 genius. Thank you as this has given me a few 💡
Great tip Chuck ... Happy Christmas.
Thanks Chep. 🎄🎄
Merry Christmas Chuck! Awesome print and tips.
Thank You so much ❤.
Cura has an option to do exactly what you have needed. On the experimental menu - "make overhang printable".
Read the comment pinned at the top.
Great info in the video and the comments have some really helpful discussions too.
Every video is so handy, thanks!!
LOL! You can do the same with "Make overhang printable" in Cura
I don’t like how it big it ramps everything including the top of the letters that already printed well.
hey chep have a merry christmas happy new year
Thanks for the profile. Going to try it out on the next one.
I’m extremely surprised. I think it prints better than this 5.0 super good quality. Not to mention it cut my print time down from seven hours to three hours and looks absolutely great.
Thank you! I was able to finish my white elephant gift just in time!
my favorite youtube grandpa
I tried to print it and i cant stop it from sagging on my ender 3 pro with th3d software
Been watching for awhile, great channel. BTW cool projectI wondered if you worked with other printers such as Voron and VZBot etc.
Many others but not those two.
@@FilamentFriday do you have any that you recommend from personal experience?
Is it just me, or did the 5.2 profile ADD time to the print rather than reducing it? The 5.1 profiles were giving me some problems on 5.2 (poor layer adhesion and a very spotty top layer). I was hoping to see a good 5.2 profile from Chuck but this one actually added time to the print, even more than the default 0.2 good profile...
i have creality printer related question
i suspect my hot end cooler starting to fail, 1st because of a slightly grinding noise it makes 2nd because i can't print small details with 0.2mm nozzle anymore but it still prints long features with the same nozzle and filement settings just fine
so what would be the cfm of the oryginal hot end cooler fan ?
would replacing 4010 fan to 4020 help or break the printer? because it would just barely fit
I might have to try the most updated profile. I have one of the older profiles and the overhangs are always a spaghetti mess even if supported.
You have access now to the Patreon profiles.
@@FilamentFriday cheers, thanks!
i tried loading it in to cura and it doesn't seem to like the 5.2 file
I'm new to this 3d printer game. I like the project. Link to led/battery holder? I searched thangs but can't seem to find it. Thanks and Merry Christmas.
It is a component of Tinkercad, not a separate .stl download. cheers
I included it in the download.
Sweet
The 5.2 profile is double the time of the 5.1. I haven't tried it yet but is this for quality purposes ?
I'm running an ender 3 pro and ender 5 pro and with the 5.1 profiles everything comes out amazing. Thank you for all your great guidance.
Sliced the popular Retromaker Chirstmas ornament with 5.0 Good profile (17h 30min) and 5.2 Good Profile (20Hours). Not sure what is changed between them but the 5.0 profile is faster.
Does that profile work with a stock ender 3 pro?
Great video. Just want to say try adjusting the layer Height on any of his profiles.
Hello I have an ender 5 pro but no matter what I try in cura I can not get rid off stringing
how do you know which wire of the led to put on the positive/plus side of the led holder?
The lead that is longer is the positive (anode). Can also just try, if it doesn't light up, flip it.
@@cklamNL thx :]
I just use this little ditty: A longer leg is a positive thing
@@m0771gan you don’t want to know how they taught us to remember positive camber in Shop class. 😂😂
@@SammyB562 🤫🤣
hello
you cant say square space because its tm by square space
I have three ender 3s. All three went blue screen 1 after another. So sick of these things.
Get an artillery genius, artillery sidewinder, or prusa depending on your budget
Do you know the cause?
I’ve never had that happen on any of my Ender 3. Only thing I’ve seen is the LCD cable was loose so the display when off.
No clue. Just one after another went blue. They sent me two new boards installed 1 and it works. They want me to do my own repairs and diagnostic procedures. I just want one that works.
When i try to open this file Cura says it can't open a .curaprofile i don't see a .3mf like the others, the file download only shows a FFV5.2_Good(0.20)_XMas.curaprofile what am i doing wrong?
You have to import it. Watch this at 3:00 mark.
th-cam.com/video/zAEjGEvtL28/w-d-xo.html
@@FilamentFriday Thank you very much that did the trick. Merry Christmas and thanks again
hey Chep, I make some designs in thinkercad and when I go to slice it in cura it slices it as if they are separate shapes, not a combined image. Do you know what's up with that?
Might have sections too thin.
Fantastic work, Chuck! 😃
Thanks a lot for all the tips!
Stay safe there with your family! 🖖😊
Ho! Ho! Ho! Merry Christmas Chuck! Thanks for the great solution! 🎅
What a great project and an innovative solution! I love that you give your videos sensible, searchable names rather than clickbait names that are hard to find in the future.
why so complicated? never had this issue with ps... I'm printing with a mk4 and have no idea what's the result with a ender or anything else. I'm just wondering. all the best
Great tip, thanks.
I still use the Santa Clause Advent Calendar you designed years ago, my great granddaughter likes changing the date for me when we watch her.
In any proper CAD software you'd just use the chamfer tool. Very simple.
thanks once again - great idea :)
Have you tried a Sonic Pad on your ender printers? I recently got one and it's great still a little buggy but it's getting there!
Not yet
I wonder if Creality was a sponsor?
Nope. Creality3DOfficial.com by Comgrow. Official reseller.
Thanks
Howdy
Great idea!
Nice video!
Do u allways get an outside seam I can never move it behind at the back
Depends on settings. Hide seam can put it on inside corners.
@@FilamentFriday mine doesn't seem to move when I adjust
I have a question about the price you said because the price see is totally different for the neo
Never mind, i found it, but I want the v2 because of the touch screen lol and thank you again
V2 doesn’t have a touch screen. It’s just a different display with knob.
Ok, well, i'll look up the difference on both so but i may get the neo then
Will your 5.1 profiles still work if I update cura to 5.2?
Yes
@@FilamentFriday Awesome, thanks! Time to update!
@@matthewbloom3869 I have hesitated to before as well for not wanting to lose the ability to use the CHEP profiles. I use them almost exclusively and they work great.
@@SammyB562 lol same here!!!
Hey Chep great video, think we could get a link to the led you used?
I believe I used this one: www.jameco.com/z/LTL-307E-Lite-On-Electronics-LED-Red-Diffused-5mm-T-1-3-4-623nm-19mcd-50VA_697522.html?CID=MERCH
@@FilamentFriday much appreciated!
@@FilamentFriday I am no electronics expert, but I believe this LED should have a resistor in the circuit. It will probably kill that battery/itself very quickly otherwise.
Sky captain-Lithium batteries have internal resistance so you can get away with this. A resistor would reduce brightness and prolong the battery life but this was to show the Tinkercad design to create a simple light source. Some have already printed it and replaced it with a light from the Christmas tree.
All of your Cura profiles used to be free. ☹
Some still are. The whole set including archived versions is a Patreon perk for only $1/month. I think all my work is worth $1.
@@FilamentFriday Hard to argue when you put it that way. 😄
You should absolutely never connect a led directly to a battery. ALWAYS use a series resistor.
Agree, but apparently you can hook up an LED directly to a 3.0 volt lithium coin cell, and it will work without issue. The main reason you can get away with this is that a lithium coin cell has a certain amount of internal resistance.
Thanks