Do this to get more out of your TinyHawk S | Critical Setup & Binding

แชร์
ฝัง

ความคิดเห็น • 78

  • @graysonhobby
    @graysonhobby  5 ปีที่แล้ว +4

    Do you fly the TinyHawk S on 1S or 2S batteries? Like always, please help support our channel and store.. Even a small purchase helps!

    • @pxsaber2177
      @pxsaber2177 5 ปีที่แล้ว +4

      I did fly a few 2S batteries but the motors are getting pretty hot.
      I think its still better to fly on 1S. For proximity flying its enough

    • @djbis
      @djbis 5 ปีที่แล้ว

      @@pxsaber2177 I found the same issue. Everything returned REALLY HOT. Including the battery and the board. It flies quickly and efficiently on 1S, I am going to stick to it as well. 2S is overkill for something this light, but I am happy that the option is there...

    • @jonashediger182
      @jonashediger182 4 ปีที่แล้ว

      What about the tiny hawk 2 ?

    • @QSpeedRacer
      @QSpeedRacer 4 ปีที่แล้ว

      Im flying in a tiny house learning.. I fly both but lowered 2s throttle scale

    • @thenewfire
      @thenewfire 4 ปีที่แล้ว

      1s. Thats what this drone is best at. Get another drone when you need 2s.

  • @readysetdrone
    @readysetdrone 5 ปีที่แล้ว +1

    Great video guys! I just got the TinyHawk S and this was very helpful. Thanks!

  • @3eggerfpv397
    @3eggerfpv397 5 ปีที่แล้ว +11

    I believe you also need to chenge the rate mode as well...Profile 1 Rate 1, Profile 2, Rate 2?

    • @Jake-co7rt
      @Jake-co7rt 5 ปีที่แล้ว

      Separate issue.
      You definitely want to look at that in Betaflight, though.
      I usually set expo to zero on mine, and rate high enough to get a couple of full 360s per second or so, at the high end,
      then do my expos etc from the Tx end.
      To each their own. But it definitely makes a difference.

    • @erkanerdogan5873
      @erkanerdogan5873 5 ปีที่แล้ว

      Great question. This is also confusing to me.

    • @3eggerfpv397
      @3eggerfpv397 5 ปีที่แล้ว

      Erkan Erdogan - You do need to change both, profile and rate to the same number. 1=1s lipo and 2=2s lipo. All this can be done within the OSD via your goggles!

    • @Jake-co7rt
      @Jake-co7rt 5 ปีที่แล้ว +2

      I have had mine on rate-profile 1 all the time with no problems.
      But like I said, I change mine to a flat rate and super-rate, then do that stuff from the Tx side.
      If you don't want to tune them yourself, matching Rate-profiles with PID-profiles with Battery-size probably is the safest route.
      And definitely make sure you switch them when you go to 2S.
      I've forgotten a couple of times each way.
      1S on PID-profile-2: Didn't notice 'til afterward. "Oops. Forgot to do that. Oh well."
      2S on PID-profile-1: Quad tried to fly to the moon. "AAAAAAGH!!!" (disarm; quad falls from 20 feet and breaks a prop)

    • @CCC0122
      @CCC0122 4 ปีที่แล้ว

      @@Jake-co7rt good to know

  • @SunriseWaterMedia
    @SunriseWaterMedia 3 ปีที่แล้ว +1

    Great video! Is it normal for the motor screw to be too hot to touch? I'm flying 2s and am worried the motors are too hot. I am in profile 2.

  • @caymandiver75
    @caymandiver75 5 ปีที่แล้ว

    Found it pretty interesting that my new TinyHawk S bound right up to my Taranis that I also use for the original TinyHawk S. I didn't have to bind! It just worked. LOL

  • @haka8702
    @haka8702 4 ปีที่แล้ว

    4:35 From what I heard betaflight supports changing PID settings based on voltage, so it should auto-switch

  • @thebigbilltheory4388
    @thebigbilltheory4388 4 ปีที่แล้ว

    So I have a d9x and it’s binding with the THs. Sticks show up and work as well as one switch in betaflight but after saving and disconnecting it won’t operate the drone. I know this is an older video. But hoping for help. Thank.

  • @NagyerdeiKorisok
    @NagyerdeiKorisok 5 ปีที่แล้ว +1

    Did any1 have issues flying with the 2S battery? Most of the time I can't arm it, though I put it to profile 2.
    Also what PID are you guys using? Default PID settings doesn't seem to be good enough

    • @valentinleuci
      @valentinleuci 5 ปีที่แล้ว

      Nagyerdei Korisok - Uristenzor use profile and pid accordingly to the battery 1-2s, profile 2 is for 2s

  • @DemoPwr
    @DemoPwr 5 ปีที่แล้ว

    Great job fellas, thank you for the fast shipment of my Diatone GT R349 frame kit and the Runcam tx 200 vtx, hope to meet you one day...cheers!🖐️😎👍Michael A, ATL.

  • @Burn377
    @Burn377 5 ปีที่แล้ว +1

    I've found the issue with dropouts is radio firmware dependant, my x-lite with latest firmware has dropouts in d16 but my x9d plus SE with earlier firmware has no issues including with telemetry on.

  • @1975supermike
    @1975supermike 3 ปีที่แล้ว

    Would it bind ok to the tx16s ? Thanks

  • @WillThat
    @WillThat 5 ปีที่แล้ว

    I used one of the spare props to push the bind button. Easy peasy.

    • @Tom-mk7iq
      @Tom-mk7iq 4 ปีที่แล้ว

      Same bruh

  • @1975supermike
    @1975supermike 3 ปีที่แล้ว

    Dumb noobie question but how does something so light fly outside when something like a mavic mini at 250g struggles in the slightest wind ? Cheers

  • @marcjacob6112011
    @marcjacob6112011 2 ปีที่แล้ว

    Can you guys open in washington state because its hard to find fpv kits

  • @mikealls8938
    @mikealls8938 5 ปีที่แล้ว

    I bound mine through betaflight cli seems to work fine !

  • @orix2002
    @orix2002 4 ปีที่แล้ว

    I bought my tinyhawk s 2 weeks ago and I didn't manage to bind in d16 but only in d8 mode although I put it on frsky_x in betaflight... I did the exact thing you did in the video and the only difference is that I have the qx7 and not the qx7s transmitter... is that a problem? PLS HELP

  • @CCC0122
    @CCC0122 4 ปีที่แล้ว

    My S flys so slow in profile 1 and I only have the 1 2s battery with that size and connector. Any ideas? Ty

  • @LegalizeWeix
    @LegalizeWeix 4 ปีที่แล้ว

    thanks , good to know! in the manual you can´t find something about this.. also the screws of the motors where not tight on my newly bought th2,. i lost a resistor because of this.. and tried to fixed it .. works fine on 1s but not on 2s

  • @befreebailbonds3329
    @befreebailbonds3329 5 ปีที่แล้ว

    You fellas do pretty good work, Thanks.

  • @sebastrianw.4673
    @sebastrianw.4673 5 ปีที่แล้ว

    I replaced my flight controller in my Eachine Aurora 100 with FlySky receiver. My flight controller LED light comes on and my receiver LED light goes solid when I turn on the remote transmitter to show I am connected. When I hit the throttle my motors don't spin. I don't know how to set up my FC and I am using the speedy bee app on my Samsung tablet. The flight controller is not communicating with betaflight. Any help will greatly appreciated. Thanks for video. Keep it in the air brothers

  • @mike97431
    @mike97431 5 ปีที่แล้ว +1

    I've been given a Flysky FS-i6 transmitter , will it work properly with this Tiny hawk 2s

    • @graysonhobby
      @graysonhobby  5 ปีที่แล้ว

      Out of the box it's just frsky protocol

  • @900Redshark
    @900Redshark 5 ปีที่แล้ว

    I am completely new to drones. If I were to purchase the TinyHawk S with the Frsky Taransis controller and Fatshark V3 Recon goggles...would I be good to go for flying? As in would it all sync up and work? Or am I missing something parts/connectors whatever? And secondly, if I then wanted to upgrade to the Hawk freestyle down the road could I use the Taransis controller still? Or would I need to buy a whole new controller? Thanks !

    • @danman7665
      @danman7665 5 ปีที่แล้ว

      Redshark 900 you’d be good to go. Probably would need a couple extra batteries. And maybe a proper charger with a parallelboard down the line.

    • @900Redshark
      @900Redshark 5 ปีที่แล้ว

      Sounds great got it ordered! Any suggestions for a proper charger? I looked at some online and well I was lost. 10$-180$. I would say once I get comfortable with the TinyHawk I’d like to move up to a 3S or 4S drone. Do they make combo chargers for different size batteries? One site mentioned it takes about 45-60min to charge a battery is this true?

    • @danman7665
      @danman7665 5 ปีที่แล้ว

      Redshark 900 yes, the isdt q6 pro with a paralellboard that supports 1s will take you a long way and it’s a mid priced charger with all the functions you need. It’s one of the most popular on the market. You will need a power supply from an old laptop or anything else that gives 7-30V DC is the cheapest.
      You should look into charging on TH-cam. It can be catastrophic if you do it wrong. Some set their house on fire. To put it simple is that most batteries take 45-60 min. Mine are done in 10-15 min. But it is more dangerous and you should really read or look up the do and don’ts. And the batteries gets worn out faster if you change them faster.

    • @900Redshark
      @900Redshark 5 ปีที่แล้ว

      Sounds good thanks for helping

  • @larryfisher
    @larryfisher 3 ปีที่แล้ว

    So blue flashing it's bound IAM new n trying to bind this to the beta 2se transmitter n set up on android not having any luck,,can I just send to you guys n have you configure for me

  • @gunngin3586
    @gunngin3586 5 ปีที่แล้ว +1

    Im getting into fpv and am wondering what d8 and d16 means and which one is "better"?

    • @MrDrNukiz
      @MrDrNukiz 5 ปีที่แล้ว

      Me2, I think D16 is newer? but slower than D8? after some "googeling"

    • @donmichaelcorbin4417
      @donmichaelcorbin4417 4 ปีที่แล้ว +1

      D8 - A communication protocol in older D-series FrSky radios with 8 channels and telemetry but otherwise missing the expanded feature set of newer X-series radios.
      D16 - A communication protocol in newer X-series FrSky radios offering up to 32 channels, telemetry, S-Port support, unique receiver coordination, and others.
      (Open TX University)

  • @peterspartan-fpv2410
    @peterspartan-fpv2410 5 ปีที่แล้ว +1

    Great job boys the emax tinyhawk 2s seems to be a great whoop style quad, can it support a 2s 450mah battery or is it to heavy, keep up the great work, what about a speed test on the emax tinyhawk 1s and 2s? 👍😀

    • @yamax87
      @yamax87 5 ปีที่แล้ว

      I tried the 2s tattu 450 and it was way too heavy. The 300 is as heavy as I would go.

  • @syntrexfpv1347
    @syntrexfpv1347 3 ปีที่แล้ว

    My tinyhawk is brand new out the box and will not go into bind mode

  • @SergioLopez-vu5lv
    @SergioLopez-vu5lv 5 ปีที่แล้ว

    Can u bind this to jumper ts8

  • @sebastrianw.4673
    @sebastrianw.4673 5 ปีที่แล้ว

    I have a Aurora 100 with flysky receiver. I replaced the receiver and flight controller with original parts. My flight controller Powers up and my receiver LED light goes solid when remote transmitter is turned on to indicate connection but when arm switch is ingauged I don't hear a beep to indicate that it is armed and when I move the sticks motors don't spin. I know it has to be something in the settings. This is my first time experiencing this and still is new to the hobby. If I would have to ship it to someone to work this issue out could I send it to you all? Do you all offer those kind of services or can you direct me to who do? Thanks

  • @RavenWindrunner
    @RavenWindrunner 5 ปีที่แล้ว

    Any issues with using the tinyhawk s in d16 mode?

  • @ChrisM-yr5tt
    @ChrisM-yr5tt 5 ปีที่แล้ว

    Hi recently purchased the tiny hawk s tried binding in d16 and everything was ok when i tried to set aux switches throttle and roll became reversed. I tried resetting it to d8 and it still has it reversed. Any suggestions on how to fix it. Thanks for whatever suggestions you have. Been flying fpv for a year or so but i have had a friend handle the beta flight and hes to busy so I guess im close to a noob with the betaflight.

  • @donmichaelcorbin4417
    @donmichaelcorbin4417 5 ปีที่แล้ว +3

    4:22 "begins" to explain how to run 2S.

  •  5 ปีที่แล้ว +4

    this title tho.. still waiting what to do to get more out of my TinyHawk S. I mean if binding is all I can do to get more of this quad, then ok.

  • @sgtnoname2000
    @sgtnoname2000 5 ปีที่แล้ว

    Not sure if anyone told you but you can push the battery tray instead of sticking a screwdriver in there

  • @jcenergy2493
    @jcenergy2493 5 ปีที่แล้ว

    I need help with this quad (actually the Tinyhawk 2)! I am stuck, I got one version to give me sticks but no toggles (x-lite s). Did you flash the firmware as the manual? I have and it does not work properly! I mapped in BF and in the controller, but NO switched no matter the firmware.... WAH!! (This is on 2 different TH-2's)

    • @valentinleuci
      @valentinleuci 5 ปีที่แล้ว

      JC Energy flash OpenTX try, got x-lite pro, all runs fine.

    • @jcenergy2493
      @jcenergy2493 5 ปีที่แล้ว

      ya, I had, that was the problem lo. my settings were gone, needed to set switches back up in tx..

  • @cjpemata1623
    @cjpemata1623 5 ปีที่แล้ว

    Frsky txo2 transmitters d16. Same procedure

  • @samavella8831
    @samavella8831 5 ปีที่แล้ว

    Hi Gentlemen
    Great review; very informative!
    Does either D8 or D16 binding option give you Telemetry?
    Thanks.

  • @fpvforever1790
    @fpvforever1790 5 ปีที่แล้ว

    good video... i wish the manufacturer would use only DEAD CAT style frames for NO PROPS in the camera FOV. thanks

  • @gbro8822
    @gbro8822 5 ปีที่แล้ว

    Thank you

  • @Jake-co7rt
    @Jake-co7rt 5 ปีที่แล้ว

    Thanks for doing this vid.
    Super helpful. (c:

  • @georgeaura
    @georgeaura 4 ปีที่แล้ว

    you changed the pid profile but not the rate profile

  • @charlesreed1099
    @charlesreed1099 5 ปีที่แล้ว

    Just so you know you don't have to take the back off to push on the bind button just fine the bind button and push down on the back plastic you can feel it click without taking the back off

  • @tensaoutj
    @tensaoutj 5 ปีที่แล้ว

    Thank’s a lot

  • @MichaelBeamTheMan
    @MichaelBeamTheMan 5 ปีที่แล้ว

    You should have a sale and sell it for the version one price.

  • @felixemmann9262
    @felixemmann9262 5 ปีที่แล้ว +1

    Pleeesss make a Video how to bind a et 115 v2 to an spektrum dx8 good video like ever

  • @ulfsoderberg4184
    @ulfsoderberg4184 5 ปีที่แล้ว

    Hi,
    It looks like you have a Tinyhawk S with the old FC intended for the original TInyhawk. This should not be bindable in D16. Did you replace it or do you have two Tinyhawk S?
    The old one you have: emaxmodel.com/aio-flight-controller-vtx-receiver.html
    The correct one: emaxmodel.com/emax-tinyhawk-s-indoor-drone-part-aio-flight-controller-vtx-receiver.html
    You can easily see the difference on the motor connections, lying down and standing up.
    Thanks!

  • @DemoPwr
    @DemoPwr 5 ปีที่แล้ว

    Micheal A. in Atl.

  • @thegrafxguy1
    @thegrafxguy1 5 ปีที่แล้ว +1

    push it with something non-metal he says, right before using a hex driver to push the button. lol

    • @graysonhobby
      @graysonhobby  5 ปีที่แล้ว +1

      do what we say, not what we do lol that button is tiny,

  • @jakelang4387
    @jakelang4387 3 ปีที่แล้ว

    I'm sorry,but the first version is way faster on 1s than this one and the 2 hawk..they just pulled my chain to get me to buy the 2 Version..but I love the new racer

  • @Faber850
    @Faber850 5 ปีที่แล้ว

    New guy in the blok. Your binding instruction simply dosnt do it.. please redo that part thank you

  • @sobacodemono1
    @sobacodemono1 4 ปีที่แล้ว

    nice, wacht my video