Hello. Does it shows in the EWELINK app when the door is open, and also when the door is closed.. I´m planning to use it in mu garage door.. So I want to know the state of the door (Open or closed). Thank you for your info.
Hi, in ewelink I only see when the sensor was triggered, it appears as an alarm. But I don't see if it is still open or closed. I guess you need to check some other app for this.
Overhill create a “ scene”:in ewelink and either manually enable in app when you leave or set time parameters in app to enable during timeframe you are normally away from home
It is very simple to Turn off AC using Door sensor, Use Smart scene function in the Ewelink App , link the door sensor and If sensor active Switch off the ( AC to be connected using SONOFF PW R2 smart switch module ) , you can define any scene from multiple door sensors, wish good luck, If you need any further details or support welcome
The guy in the following video is amazing. th-cam.com/video/8dT95zBeb1U/w-d-xo.html He just used ATtiny85 chip and programmed it to do all kind of stuff like sending Door open/close code, sending battery low/high codes. And his circuit idea uses only 4mA just for a second while sending code and than at 0.5uA in standby mode. Seems battery would last much much longer.
Nice video 👍🏽
Very good video well done but it's now 2020 and the Ewelink is now version three and a big change try it and do a new video
Hello. Does it shows in the EWELINK app when the door is open, and also when the door is closed.. I´m planning to use it in mu garage door.. So I want to know the state of the door (Open or closed). Thank you for your info.
Hi, in ewelink I only see when the sensor was triggered, it appears as an alarm.
But I don't see if it is still open or closed.
I guess you need to check some other app for this.
@@kostanos thank you for your fast answer.
Love it
I bought a Sonoff DW1 Door And Window Alarm Sensor. But I don't know how to configure it in ALEXA. Is it compatible to start a routine in ALEXA?
Can u use dw1 without rf bridge?
How can we activate or desactivate the system ? Per exemple I want to activate only when I'm out, not when I'm at home
Overhill create a “ scene”:in ewelink and either manually enable in app when you leave or set time parameters in app to enable during timeframe you are normally away from home
Do you need the bridge?
Yes, you need bridge
How to connect this door sensor with air condition? and torn off air condition when door or window is opened?
Kostya Kostyushko nice idea
It is very simple to Turn off AC using Door sensor, Use Smart scene function in the Ewelink App , link the door sensor and If sensor active Switch off the ( AC to be connected using SONOFF PW R2 smart switch module ) , you can define any scene from multiple door sensors, wish good luck, If you need any further details or support welcome
I does not show door is open or closed
Why all the haters?
The guy in the following video is amazing. th-cam.com/video/8dT95zBeb1U/w-d-xo.html
He just used ATtiny85 chip and programmed it to do all kind of stuff like sending Door open/close code, sending battery low/high codes. And his circuit idea uses only 4mA just for a second while sending code and than at 0.5uA in standby mode. Seems battery would last much much longer.
Yes, he did a wonderful job. I tried his idea and to my surprise, it worked. Genius !!!
Real women
Are you blind?
Im guessing tying your shoes is an all day task