Hello You do a beautiful job. Congratulations. Recent video radios have more Button and potentiometers. Can you show the schematic of the final radio control? I have been following your projects for a long time. please
Good morning, I ask permission to share the tutorial you made, I will repost it on my blog by attaching the youtube link and your github link. don't you mind?
Hi, it is ok, as long as you declare, that it is not your own work. Please attach these links as well. Playlist: th-cam.com/play/PLGO5EJJClJBCjIvu8frS7LrEU3H2Yz_so.html Github:github.com/TheDIYGuy999/Micro_RC_Receivergithub.com/TheDIYGuy999/RC_Transmittergithub.com/TheDIYGuy999/RC_Transmitter_STM32www.thingiverse.com/TheDIYGuy999/aboutgithub.com/TheDIYGuy999/RC_Transmitter/blob/master/Manual_English.pdf
of course not, I just reposted it in Indonesian so that it is easy to understand in my country, I still attach the source and copyright link on your behalf, thank you for giving permission, hopefully the knowledge is useful
@@TheDIYGuy999 Thanks :) But thats all greek to me. I have no idea what I am looking at with that schematic. I was hoping to find a simple wiring diagram.
Hello! Your project is fantastic! I'm collecting the material to do it for my k989 but i'm in trouble with some things: on the receiver scheme V1.4 you use a MIC5205 for 3,3 supply, in the transmitter V1.1 you use 1117-3.3 I would like to know if i can use 1117-3.3 in both. I want to do it without eagle but with the single parts. Thank you for sharing your work!
Hi, thanks for the praise! You can also use a 1117-3.3. It just has a bigger footprint, but if you have enough space in your vehicle, you can use it. Good luck!
Hi, unfortunately I don't have a detailed documentation about this build, it was just done "design by doing style". As I already mentioned, the pinout is the same. In "transmitterConfig.h", select "CONFIG_WLTOYS" in code line 6
Hello, I already assembled one transmitter and one receiver which are working very well. I also modified a two channels car transmitter but I have an issue which I don't suceed to fix. After switching on transmitter and receiver, I see the green led flashing which indicates the correct connection between transmitter and receiver. Problem is that when I move one of the two poti, I immediatly loose the connection, led stop to flash. Do you have any idea on how to fix this topic?
The pot may be faulty and does generate spikes. Or your batteries may be too weak. Also keep in mind, that smoothing capacitors are very important for a clean supply voltage. I recommend to solder an additional 100nF ceramic capacitor directly across the NRF24L01+ supply pins.
Hello
You do a beautiful job. Congratulations.
Recent video radios have more Button and potentiometers.
Can you show the schematic of the final radio control?
I have been following your projects for a long time.
please
Could you help me build up your micro and mini remoter for playing, there are absolutely involved much electric and electronic skills ?
so much helping, thans a lot ...
You're welcome
Awesome video
Thanks
Good morning, I ask permission to share the tutorial you made, I will repost it on my blog by attaching the youtube link and your github link. don't you mind?
Hi, it is ok, as long as you declare, that it is not your own work. Please attach these links as well.
Playlist: th-cam.com/play/PLGO5EJJClJBCjIvu8frS7LrEU3H2Yz_so.html
Github:github.com/TheDIYGuy999/Micro_RC_Receivergithub.com/TheDIYGuy999/RC_Transmittergithub.com/TheDIYGuy999/RC_Transmitter_STM32www.thingiverse.com/TheDIYGuy999/aboutgithub.com/TheDIYGuy999/RC_Transmitter/blob/master/Manual_English.pdf
of course not, I just reposted it in Indonesian so that it is easy to understand in my country, I still attach the source and copyright link on your behalf, thank you for giving permission, hopefully the knowledge is useful
what pin is conected to CH2 and CH4 ?
I want to do this with a WLToys remote. I have the arduino board, but I can not find a wire diagram to show where everything goes.
The schematic can be found on my GitHub: github.com/TheDIYGuy999/RC_Transmitter/tree/master/Eagle_PCB
@@TheDIYGuy999 Thanks :) But thats all greek to me. I have no idea what I am looking at with that schematic. I was hoping to find a simple wiring diagram.
@@TheDIYGuy999 Also, is it possible to just send PPM out to an existing RF Module like a FrSky Module so I can bind to FrSky Receivers??
Hello!
Your project is fantastic!
I'm collecting the material to do it for my k989 but i'm in trouble with some things:
on the receiver scheme V1.4 you use a MIC5205 for 3,3 supply, in the transmitter V1.1 you use 1117-3.3
I would like to know if i can use 1117-3.3 in both.
I want to do it without eagle but with the single parts.
Thank you for sharing your work!
Hi, thanks for the praise! You can also use a 1117-3.3. It just has a bigger footprint, but if you have enough space in your vehicle, you can use it. Good luck!
Thank you man!
WOW a great result but a lot of work with skills needed to do it right .
how to thortel using esc?
Hi, please, is it possible to do a tutorial video like this for Wltoys remotes. Thank you 😊
Hi, unfortunately I don't have a detailed documentation about this build, it was just done "design by doing style". As I already mentioned, the pinout is the same. In "transmitterConfig.h", select "CONFIG_WLTOYS" in code line 6
TheDIYGuy999 Thank you bro!
Hello, I already assembled one transmitter and one receiver which are working very well.
I also modified a two channels car transmitter but I have an issue which I don't suceed to fix. After switching on transmitter and receiver, I see the green led flashing which indicates the correct connection between transmitter and receiver. Problem is that when I move one of the two poti, I immediatly loose the connection, led stop to flash. Do you have any idea on how to fix this topic?
The pot may be faulty and does generate spikes. Or your batteries may be too weak. Also keep in mind, that smoothing capacitors are very important for a clean supply voltage. I recommend to solder an additional 100nF ceramic capacitor directly across the NRF24L01+ supply pins.
help me again for the wiring schematics from transimitter (steering & forward-reverse) to pro mini PINs ..., thanks
This handmade Transmitter also uses the same schematic as the "Micro RC" transmitter:
github.com/TheDIYGuy999/RC_Transmitter/tree/master/Eagle_PCB
there is same schematic for potensio at old transmitter? cause at the eagle pcb you'r using analog joystick ...
every analog joystick is based on potentiometers. So the wiring schematic is exactly the same
Can you make a rc plane with micro rc and brushless motor
Maybe I will do it one day. Who knows?
i will if i can i can send a few photos. ı am sure iwill be using micro rc because its the best among other nrflo01 examples
Thanks for the praise. Yes, please send some photos. Can't wait to see them
Third