How to Replace Mower Deck Belt Cub Cadet XT1 46"
ฝัง
- เผยแพร่เมื่อ 20 พ.ค. 2023
- How to install mower deck belt on a Cub Cadet XT1 with 46" Deck.
How to replace mower deck belt Cub Cadet XT1 Lawn Tractor.
For questions and business inquiries please use contact page on my web site www.johnsonssmallengines.com - แนวปฏิบัติและการใช้ชีวิต
Thank you! I appreciate the time and effort you put into this video. There’s a 8+ week waitlist to get a mower serviced where I live. My mower’s belt broke last week and because of your tutorial, I , a middle aged woman who never took a small engine repair class in my life, was able to replace it!
Awesome! You made my week :) I'm glad you were able to get the job done. Thank you for the kind comment and sharing.
The guy is better with one hand then I am with two. Nice work.
This video saves me every time my belt jumps off!
I love my XT1 except for the belt coming off frequently. I haven't figured out why it keeps happening. This video and the one where you change the belt have helped me many, many times. One would think I'd be able to remove the deck in my sleep by now but every summer I have to go back and have you guide me through it again.
Thanks for making my life a little easier 💗❤️
I’m glad to help! Thank you for watching and the kind comment.
Just a guess, but, SLOWLY engage and disengage the belt at a SLOWER engine speed.... You don't want to just jam the belt engagement handle forward too fast OR release it too fast.... Following the above method, I have never had any belt breakage or jumping off in the four years of mowing so far....
@@ainttakenanyshit Thanks. I have been more careful about that since the belt started jumping off. Mower is in the shop now so I'm curious if they found a problem with the pulley or anything.
This is the best video I have ever seen on how to replace the mower deck belt on my Cub Cadet XT1. Thank you very much for an excellent video!
I’m glad it was helpful and thank you for the kind comment. Please give this video a like, and share my channel to help it grow. It would be greatly appreciated!
One of the most well articulated tutorials I have watched online! Thank you.
Glad it was helpful and thank you for the kind comment! Please give this video a like and share the channel with your friends to help it grow. It would be greatly appreciated,
This is my mower. I watched you take the mower deck off before, I think. I had to change my belt, and your video helped me do that. I had to guess a little about the removal and replacement of the belt, back then. Watching this I see I did pretty close to what you did. Only thing is, when you pull the deck on the edge be careful because it can slide and fall. It did on me, and I fell, it fell on my ankle. And I limped around for a few days. You are very correct; the right belt is the way to go. On a different mower, I picked a belt at a hardware store. Measuring it like you did but it was a bit too long and slipped off often. Saying all that, I want to thank you so very much for your videos. They have been most useful to me.
Also make sure the width of the belt is correct as well. The parts guy gave me one 1/8th inch wider. It was a struggle until I got the correct width belt.
Excellent tutorial. Last time I changed the belt the cable spring gave me fits. Now I know the trick.
I'm glad it was helpful and your back up and running. Thank you for watching, sharing and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
I frantically changed the belt yesterday and find this video today!!! I asked several for help and the mower is only two months old but the grass was not waiting for me to find someone! Wish I would of seen this beforehand but THANKS for all of the tips and places to check which I did not do.....I did not take the deck off and I did not loosen the two pulleys. I started with the drive pulley under the engine and shimmied the belt in, then I just put the belt around it's spots as in the diagram by just holding the belt and turning the pulleys then started it up and mowed for two hours....BUT NOW, I will be going and checking all of the things you mentioned, THANKS SO MUCH
I’m glad it will be helpful! Thank you for watching and the kind comment. Please give this video a like and share my channel with your friends to help it grow! It would be greatly appreciated:)
AWSOME TUTORIAL. clear instruction without chat chat. GREAT camera work so what you NEED TO SEE in clear where everything gees.
I'm glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated! Thank you for watching:)
Please pay attention to the very first comment he made about the OEM belt. I have now purchased three different belts trying to finish my rebuilt project, and have gotten the correct "same as" belt that has turned out to be the wrong size. One has been been too short, one has been too long
Thank you for a great how-to video.... With engaging and disengaging the belt SLOWLY and at a slower engine speed, I have never had a belt break OR jump off om my LT42.... BUT, now with a soon to arrive LT46, I'm good-to-go IF I have any belt issues.... Thanks again....
I’m glad it was helpful and thank you for the kind comment. Please give this video a like, and share my channel with your friends to help it grow. It would be greatly appreciated! Thank you for washing:)
Wow, you are an amazing teacher! Your attention to detail, your clear explanation, steadiness to holding the camera make me believe I can actually do this on my cadet! Thank you!
I'm glad it was helpful and thank you for the kind comment. Just take your time and you will be fine!
I was born with 2 hands. Lost 1 in an explosion at 30. Nov. 29 2018. Mad respect to you.
Sorry to hear but thanks for sharing. I am 52 and If I don’t tell everyone right off from the start that I was born, that way, they all think that I lost it under a mower! and I definitely did not!! I started telling everybody after a comment on my channel, “ would you trust a one handed guy to work on your lawnmower?” That comment will go to my grave. I hope you have been able to learn to cope as I know nothing else, but what I have. I would say it must be much harder for you. Again, thanks for sharing.
Thank you so much! I have a 2017 Cub Cadet XT1 L46 and the belt finally failed for the first time. Your video made it very easy to swap out the belt!
I’m glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated. Thank you for watching. Hopefully next spring I will have a video on how to service the Cub Cadet XT1 or XT2 for many helpful tips.
Excellent step by step instructions. I hate doing this stuff but you made it doable. Thanks.
I’m glad it was helpful and thank you for the kind comment!
Thank you so much!!! I could never have done this without your video
I'm glad it was helpful and your back up and running! Thanks for sharing and supporting my channel. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
Wow, this was an excellent video to show me exactly what I need to do, no fuss, no fluff. Thank you for showing all the details including what tools we will need, part number and a step by step action plan.
I’m glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven’t yet and share my channel to help it grow. It would be greatly appreciated!
Hands down the best video , very detailed
I'm glad is was helpful. Thank you for the kind comment and supporting my channel! Please share my channel to help it grow. It would be greatly appreciated! Thank you for watching :)
Dude, I was dreading having to do this, but this tutorial is top-notch. Thank you.
I hope all goes smoothly! Just take your time and you do fine:) Thank you for the kind comment! Please give this video a like, subscribe if you haven’t already and share my channel to help it grow. It would greatly appreciated!
Thanks for the video! The difference between the older Cubs (like my old LT1042) is pretty clear and it seems like MTD improved on a few things. For example, the belt keeper rod is way easier to remove and replace on the XT1 vs the LT1042, because on the 42 they made that bolt go in upside down with very little room to thread it back in so you’d have to balance it on an extension very carefully. Also, the clips to remove the deck from the deck raise mechanism is much easier too, before you’d have to pull a spring loaded hook on each side and it was a PITA to get it out.
I don’t understand why they made the bottom nut on that pulley below the deck instead of under that pulley like the older Cubs though, might have been an engineering decision. But I will say the deck on the XT1 seems to be pretty solid.
Edit: Also this video made me wonder why I haven’t bought an electric ratchet yet 🤔
Great video! I was anxious about removing the deck and replacing the belt. But your step by step instructions were perfect!
I’m glad to hear! Thank you for the kind comment. Please give this video a like and share my channel with your friends to help it grow. It would be greatly appreciated! Thank you for watching:)
Best video I have seen on youtube, regardless of topic!
This video has got to be the best one I've seen for repairs or replacements. Straight to the point. Great warnings. Thanks for a great video.
I’m glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven’t yet and share my channel to help it grow. It would be greatly appreciated. Thank you for watching!
Today I tried to use the manual to remove the deck of my XT1. The manual used terms like flange lock nut and hex screw, not very useful. I think left and right idler pulley nuts would be better. Of course the manual didn't mention the spring attached the deck either so I thought I was done until the cable held my deck back. I unhooked the spring OK as well as the cable retainer and laid them on the ground. The manual said "loosen, but do not remove the flange lock nut on the right idler pulley and the hex screw on the left idler pulley". So I didn't know what "loosen" or flange lock nut meant until I watched your video. I guessed right but "guessing" is not my thing. I want to know.
I left the belt around the idler pulleys after I removed the engine pulley keeper because I couldn't figure out how to get the belt past the retainers. Boy, you move fast and made an excellent video. I was so pleased to see that there was an easier way to remove/replace the clips than the crazy methods I was trying. I discovered I have a bent chafing (deck) wheel mount on the left rear so it's "hammer time" as well (Maybe I'll use a persuader instead, a good old Archimedes lever). The wheel is mounted on a welded bracket so I will need to bend it back so the wheel is aligned to the front wheel.
My 7-tear old belt seems to be as good as new but it may have stretched so I'll compare it to a new one. It wouldn't hurt to replace it. I have done nothing to my tractor for 7 years so I cleaned and vacuumed the tractor and gave it a new Kohler fuel filter, a new air filter and pre-filter, oil filter, 2quarts of mobil synthetic oil, two new spark plugs and charged up the battery. It starts and runs great and soon it will have new mulching blades and a new deck belt. After 7 years I still got a flashing timer on the display to say everything was OK. Amazing! I'll follow the maintenance guidelines from now on. I didn't realize tat spark plugs are good for 500 hours. Of course a gap check (0.030" on myXT1) every year would be good.
Thank you for a fantastic video. Now for my blade replacement. I think I'm going out tomorrow to buy one of those electric side socket tools, very handy and of course, much faster.
Glad to hear your machine is doing good! How many hours do you have on it? Thank you for watching my video, the kind comment and supporting my channel. Please share my channel with your friends to help it grow. It would be greatly appreciated!
Excellent video! Its so well done and easy to see and follow. I'm not a fan of that cable. But how you showed each step made it very clear. Now I'm confident enough to go out and tackle it. THANK YOU!!!! Liked and Subscribed!!!
I'm glad it was helpful! Thank you for the kind comment and supporting my channel!
Thank you - I have searched for a video to help me with this and none have been this clear or thorough
I'm glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven't yet and share my channel to help it grow. It would be greatly appreciated!
Thank you for the video. Replaced my Dads belt on fathers day thanks to you. 👏🏻❤
That’s a good Father’s Day!! Glad to have helped! Thank you for watching and the kind comment.
Thank you so much! Great step by step instructions! Really appreciate you 💪
I’m glad it was helpful! Thank you for watching and the kind comment. Please give this video a like, subscribe if you haven’t already and share my channel to help it grow. It would be greatly appreciated!
I appreciate all the details you put into your videos. New subscriber.
Thank you for watching, subscribing and the kind comment! Please share my channel to help it grow. It would be greatly appreciated!
Your video is awesome. Everything worked like a charm. Great tutorial. Thank you so much!
I'm glad it was helpful. Thank you for watching and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
Thank you so much. Have a '23 CC. gave really clear instructions Thx
I'm glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated! Thank you for watching.
Outstanding video! Thank you. You have a gift!
I’m glad it was helpful! Thank you for watching and the kind comment!
Good work, Is that deck adjustable like in your previous video's? Does the adjustable hangers that is on your site fit that machine? Thanks for the video.
Thank you! The last video was a Poulan made by AYP/Husqvarna and this Cub Cadet made by MTD. Two totally different manufacturers and the way they attach and adjust the deck. This Cub has both side’s are adjustable. I will make a video on how to level the mower deck on a XT1 for a future video.
Thank you for posting these How-to videos!!! It was easy to follow and I was able to replace the mower deck belt on my own. But who invented those butterfly clips!? :)
I'm glad it was helpful and thank you for the kind comment. Those clips are a pain but they do work well! Please give this video a like, subscribe if you haven't yet and share my channel to help it grow! It would be greatly appreciated. Thank you for watching:)
Can the belt be changed with the deck left on the mower? I'm sure that it's easier with the deck off but I was just wondering.
Great video, what I thought was going to be a mission to do seems a lot easier. Thanks for a very good explanation. Thanks Mrs Google for finding you.
I’m glad it was helpful and hope all goes well. Thank you for the kind comment.
thank you so much , saved me money and time with a loose pully on my deck
I’m glad it was helpful! Thank you for watching and commenting.
I followed your instructions but unfortunately had the 46 inch Cub Cadet belt instead of the 50 inch what a difference now I know that my belt is 50 inch on my 46 LT Cub Cadet
Taught me a few things from watching you thanks for sharing
I’m glad you figured out what was wrong! Thank you for washing and the kind comment. I’m glad it was helpful.
This video was so helpful to me! just subscribed to your channel Thank You!
Awesome! Thank you!
Excellent video & very informative.
Glad it was helpful and thank you for the kind comment!
Thanks for this excellent video!
I’m glad it was helpful and thank you for the very kind comment. Please give this video a like subscribe if you haven’t yet and tell your friends about my channel to help it grow. It would be greatly appreciated!
Do you have instructions for the drive belt replacement?
great video. i have to pull my deck. my blades don't disengage quickly when released. i just changed the blades. when i used it again, it felt like the blades were unbalanced and it was shimmying. when i turned it off, the blades wound down slowly. not sure if its the blade brake or just jumped a pully. need to pull it to find out.
I’m glad it was helpful. I hope all goes well and you figure out your issues! Thank you for watching and commenting.
Great Video thanks 😊
I’m glad it was helpful and thank you for the kind comment!
Can you do a video on the left brake pad? Mine seems to be reversed
Thanks for the great video
I’m glad it was helpful! Thank you for watching and the kind comment. Please give this video a like, subscribe and share my channel with your friends to help the channel grow. It would be greatly appreciated.
Thanks for your effort i showing is how to do this.
I’m glad it was helpful!
Great job there young man and by the way do you have a video on the transmission belt replacement for a poluan XT mower and a John Deere lt 133 mower
Thanks Robert, I do not have videos on those two machines.
@@JohnsonsSmallEngines okay thanks for the info on this matter young man 👍😎
great video, was helpful. I didnt take the full deck off and apart to put on a new belt though. Maybe make a quick n easy video version? Took 5 min with 2 people.
I’m glad it was helpful. Thanks for watching!
Well done!
Thank you for watching and the kind comment.
I have a CC XT1 and was mowing today when I found a spring laying on the ground where I had already mowed. I thought it was the belt tension spring so I stopped mowing and drove it in the shop. Nothing missing, everything works fine. It's about the same diameter and color as the tension spring but looks shorter and has a double bend on one end. I have no idea where this spring goes and it's driving me crazy. But everything works so I guess I'll just run it till something quits. Any thoughts?
I work on all kinds of machines, not just Cub Cadets,so I would not know unless I could see the spring and the machine itself. I would suggest looking at the parts breakdown for the mower deck and the transmission drive, which is available online and see if you can find a spring on the parts breakdown that looks like what you have in your hand.
@@JohnsonsSmallEngines Thanks. I did find an exploded view of the deck and is definitionally not from there. I've never been around a hydro drive so I have no idea what's back there. I'll keep looking.
@@JohnsonsSmallEnginesAfter many hours of searching the mower and the internet I found where this spring came from...the neighbors trampoline.
😲Glad you figured it out:) I had one when the kids were young and there are a lot of springs.
Just want to say thank you!
Your very welcome:) I’m glad it was helpful and thank you for the kind comment
Thanks for this video! We've watched this video a couple times to help us. This time, the engagement cable feels loose. Do you have any idea why?
Not sure what you mean? “Engagement cable feels loose” it should be loose when the blades are not engaged and it should be tight when the blades are engaged. If the cable is loose when the blades are engaged, you either have more deck problems or you purchased the incorrect belt.
@@JohnsonsSmallEngines Hmmm...thanks. The handle was firm before changing the belt. After, it is loose when going from disengaged to engaged, for about the first 1-2 inches of movement. I'm a total noob, so despite your very clear instructions, I may have done something wrong.
Without being there it’s impossible for me to help much more. Double check everything and then try it. At this point there’s not much more you can do.
@@JohnsonsSmallEngines Thanks for troubleshooting with me.
I knew the old man put my belt on wrong
❤ my old man wouldn't do it at all!
Well at least you have an Ole Man that Tried for you!!!
😂❤🎉WOW. Thanks so much. Now, I can say " I got this!"
Just take your time and you do fine!! I’m glad it was helpful and thank you for the kind comment!
My belt is so tight now It won’t even crank. What did I do wrong?
So how do I change the drive belt and why would it jump off of a 2 yr old mower anyway. family friend had to switch to paying someone to mow his yard because of this and there is no warrantee pr shop service for 30 minutes travel after you get someone with a winch and/or come along to load/transport it
I have one of those mowers and for some reason the belt keeps popping off.I'm not sure why
replaced my snapped-in-half belt, and now the blades dont engage....or they may but it isn't powerful. i think the belt is moving but maybe loose....cub cadet says i bought the right model belt. Is my belt not on properly? the deck lever feels "looser" than it did when it was all working.I will investigate more next week....
bought mine last year. I did not have to touch the pullies. There is enough room to put the belt on without touching them, nor even pinch the belt. In fact, maybe mine has a bit too much room between the pully and the metal tab.
That's very good,
My John deere tractor D110 is little bit different, but that very helpful, and thank you brotha and I appreciate it.
Canvio polea trasmicion cub cadet 42
Do you really have to remove the deck?
I replaced mine and now it won't start. I think i accidentally engaged the blades. Now i gotta take it apart again.
I have one of these that was made in 2015, with over 500 hours on it. It is by far the best riding mower I have ever owned except for the piece of sh*t seat!
Holy smokes this video was perfect thank you very much I was able to replace the belt thanks you 🙌🏻
I’m glad it was helpful and you were able to get the belt replaced. Please give this video a like and tell your friends about my channel to help it grow. It would be greatly appreciated. Thank you for watching and the kind comment!
Ur a fucking beast dude
I was getting so mad at mine