Hi, I checked your 3 videos about dog deterrents, which are great and very useful for me as I'm also suffering from my neighbour's dog. But I have a question, why do you need ultrasound oscillator, piezo, or anything specific like that while you can produce ultrasound with magnetic tweeter instead of piezo, and may be you could use an mp3 player with ultrasound recorded instead of an oscillator, couldn't you? Even a normal hifi equipment is able to play 21 kHz sound, isn't it?
I really want to make something similar so the specific details of each component you’re using would be a big head start for me! I’m not an electronics genius, but I have friends that are. I just need to know the components and a basic idea of how they are hooked together. I’m also considering putting an inline remote that would open/close the circuit. I’d like to control this device from the comfort of my couch.
did you ever get your friends to make one? If so, what products did you use and how did you assemble it? I am not an electronics genius either but I could find some. Could I purchase one from you if possible?
@elrazthegreat1 thanks for doing the research and making these videos. I notice the specs for both the Skar tweeter and the Pyle PTA4 amp are 20hz to 20khz. Some have said 25khz is a good frequency for dogs. What frequency has worked for you and do you know if this amp and speaker combo can actually output 25khz? Thanks
Hi Dan The Man, the specs for the SKAR displayed on the website where I purchased them apparently were inaccurate/mislabeled, however they worked fine, I should do a follow up on that system, what do you think? Godspeed good friend...
Have you got a video of this thing in use against a yappy dog? I've seen a few of these videos but no action footage. I'd happily buy one of your setups.
I am trying to build this, but the manual for SKAR VX4-ST tweeter says the frequency response is 2.5 kHz - 20 kHz. Am I missing something? @ElRazTheGreat1
I PUT THE SPEAKER RIGHT ON THE NEIGHBORS BARKING DOGS EAR, TURNED THE VOLUME ALL THE WAY UP. AFTER ABOUT 45 MINUTES OF HOLDING THE SPEAKER TO THE DOGS HEAD, HIS TESTICLES IGNITED INTO FLAMES, A BRILLIANT ORANGE GLOW. AS SOON AS THE DOG PASSED OUT FROM PAIN, HE STOPPED BARKING. SO, VERY SUCCSESSFUL EXPERIMENT. THANK YOU FOR SHARING.
Thanks for the video it was very informative! Would you happen to know which of the two, a square wave or a sine wave, is the best for a dog bark device?
Ron it depends on the animal's hearing sensitivity, younger animals have more sensitive hearing than the older just like humans, do a search on internet. However to answer your question, in my experience the square wave seems to be more potent/effective due to the sudden stepping up and down of the wave length (distance, obstacles and the output power would affect it too). Hope this answered your inquiry! Stay safe,
@@ElRazTheGreat1 Thank you for your informative reply! Yes it answered my question. I am just getting into electronics and just built an square wave generator using a resistive capacitive circuit combined with an integrated circuit chip. I think I can use this generator with it's square wave generation and proceed with my bark device. Take care.
@@ElRazTheGreat1 Yes you are right it sounds "choppier" to me and I think is more irritating. I am thinking of actually turning the output signal off and on every half second or so to make it even more irritating and disorientating to Mr. Barker. Thanks!
One more question. I was looking at the frequency response of the Skar tweeter I think you have (www.skaraudio.com/products/vx35-st-3-5-inch-pro-audio-tweeters). The Skar website says the response is 2.2kHZ - 20kHz. My understanding is that dogs react negatively to 25kHz which is just out of audible range for most humans. Does this mean that the Skar speaker can not reproduce the required range? Sorry if this is a stupid question. I’m trying to sort this out.
Hey dude, what items are you using? Could you please give me a list? Also, is the frequency audible on start up with your setup if you set it to 20000hz? From your experiments can the tweeters go through debris or some solid objects? I don't think I'll be able to get a clear visible shot at the dog...
First of all, thank you very much for your videos. I live on an island where each house keeps between 2 and 4 dogs. Nobody cares about them barking every day for hours. Even at night time. It's a real plague!! I'm also looking for a working solution where the neighbors themselves don't notice anything. From your testing, can you recommend anything specific that worked well?
Hi ElRaz. The testoscillator has two 1/4" jacks for the sine and square wave options. My stereo receiver has 1/8" RCA style jacks. I wonder if your amp also had the RCA style jacks and if so how did you connect the two devices. Did you use an adapter jack and where did you plug into on the amp? The aux port? And did you run just a single wire from the sound generator to a port on your amp? Thanks.
Hi ElRaz, I have this little prick across the street bugging me 24/7 and driving me nuts. He's about 70-80 ft from the spot I would like to place a device, which one do you recommend ? Do you think Piezo power canon would be effective? Many thanks for your share!
All animals have different hearing level. You should try and see which method would work best. Installing a tube on the Piezo would increase the intensity and direction of the signal. Stay well,
@@ElRazTheGreat1 please subscribe back. Also what did you do with the c-max cells any updates it's been 2years lol I have 3 energi batts 12 banks total
did you ever get it to work? Can you please make a video using it on the neighbors dog and have a real life example? If it does work, can you please make an instructional video on how to make one?
Dear viewer, my machine works real well! I am not selling any product/s, on all of my videos I just share what I have experienced. I have tested my machine in many different circumstances/environments with great and positive results. The machine affects rodents, birds, cats, dogs, humans (specially youngsters and kids) strongly and effectively. However there are very strong reactions and legalities involved in this. Human rights, animal rights, municipal regulations and many other ordinances involved in this kind of powerful device! So be responsible in your action and respect the reaction. Stay Safe,
@@ElRazTheGreat1 how did you build it? I am a noob when it comes to tech... Is there a purchase guide of the items and how to assemble it? Also, can you set it to a kilohertz where it is only audible by the dog and not humans?
@@ElRazTheGreat1 how did you build it? I am a noob when it comes to tech/electronics... Is there a purchase guide of the items and how to assemble it? Also, can you set it to a kilohertz where it is only audible by the dog and not humans?
Hey man , I am trying to copy this guy (see link and read Ronnie's review). www.amazon.com/Kemo-Electronic-4330881478-Ultrasonic-Generator/dp/B00NRH95AY/ref=cm_cr_srp_d_product_top?ie=UTF8 What do you think? I am not sure what the purpose of the PVC pipes is though... I am thinking of using everything he has except maybe substitute a 12V led plug in strip for a computer power supply and substitute a car horn instead of the marine amp?
@@ElRazTheGreat1 From your experiments how much can the noise, assuming it's powerful, penetrate debris or solid objects? Also, What's the purpose of the PVC pipes in Ronnie's and in your previous designs?
Looks like an excellent wife deterrent!!
Hilarious!!!! One thousand thumbs up!!!! I can't stop laughing
Its a wife deterrent tweeter😂 definitely works😂
The police and C.O.'s just blast sonic weapons 24/7 thinking it's fun in Indiana.
Have to love that ingenuity! Those are quite some frequencies! Great guest appearance too!
LOL, don't give me ideas mano!
Awesome video series. Thanks for sharing. What ever happened to the project???
Looks like you are well on the way! But be sure to keep the Mrs happy!
Hi friend hope all is well with your family in Paradise. I'm getting there! Wifey really puts up with my stuff, I'm really thankful! Stay well,
How to piss off your neighbors.
Hi, I checked your 3 videos about dog deterrents, which are great and very useful for me as I'm also suffering from my neighbour's dog. But I have a question, why do you need ultrasound oscillator, piezo, or anything specific like that while you can produce ultrasound with magnetic tweeter instead of piezo, and may be you could use an mp3 player with ultrasound recorded instead of an oscillator, couldn't you? Even a normal hifi equipment is able to play 21 kHz sound, isn't it?
SO THATS HOW I GET RID OF THE NAGGING WIFE
Lady: "stop testing" Me: lady it's called take out your hearing aid just saying... also me: continues testing x'D
I really want to make something similar so the specific details of each component you’re using would be a big head start for me! I’m not an electronics genius, but I have friends that are. I just need to know the components and a basic idea of how they are hooked together. I’m also considering putting an inline remote that would open/close the circuit. I’d like to control this device from the comfort of my couch.
Hello, what do you need to know? Sorry for the late reply!, Stay safe,
did you ever get your friends to make one? If so, what products did you use and how did you assemble it? I am not an electronics genius either but I could find some. Could I purchase one from you if possible?
Can you please tell me the products you used and how to assemble one?
Huu OOO your in the dog house now lol grate video my friend
@elrazthegreat1 thanks for doing the research and making these videos. I notice the specs for both the Skar tweeter and the Pyle PTA4 amp are 20hz to 20khz. Some have said 25khz is a good frequency for dogs. What frequency has worked for you and do you know if this amp and speaker combo can actually output 25khz? Thanks
Hi Dan The Man, the specs for the SKAR displayed on the website where I purchased them apparently were inaccurate/mislabeled, however they worked fine, I should do a follow up on that system, what do you think? Godspeed good friend...
Have you got a video of this thing in use against a yappy dog? I've seen a few of these videos but no action footage. I'd happily buy one of your setups.
Sorry have not any yappy dogs arround to test on! However it does deter the noisy kids!
What did you finally decide on that work the best my neighbor has 25 dogs
I am trying to build this, but the manual for SKAR VX4-ST tweeter says the frequency response is 2.5 kHz - 20 kHz. Am I missing something? @ElRazTheGreat1
1:50 my wife came in 😂
Beautiful 💪🥳😍
Thank you 🙌
I PUT THE SPEAKER RIGHT ON THE NEIGHBORS BARKING DOGS EAR, TURNED THE VOLUME ALL THE WAY UP. AFTER ABOUT 45 MINUTES OF HOLDING THE SPEAKER TO THE DOGS HEAD, HIS TESTICLES IGNITED INTO FLAMES, A BRILLIANT ORANGE GLOW. AS SOON AS THE DOG PASSED OUT FROM PAIN, HE STOPPED BARKING. SO, VERY SUCCSESSFUL EXPERIMENT. THANK YOU FOR SHARING.
Awesome
Thank you Karten! Godspeed, Be Well,
Thanks for the video it was very informative! Would you happen to know which of the two, a square wave or a sine wave, is the best for a dog bark device?
Ron it depends on the animal's hearing sensitivity, younger animals have more sensitive hearing than the older just like humans, do a search on internet. However to answer your question, in my experience the square wave seems to be more potent/effective due to the sudden stepping up and down of the wave length (distance, obstacles and the output power would affect it too). Hope this answered your inquiry! Stay safe,
@@ElRazTheGreat1 Thank you for your informative reply! Yes it answered my question. I am just getting into electronics and just built an square wave generator using a resistive capacitive circuit combined with an integrated circuit chip. I think I can use this generator with it's square wave generation and proceed with my bark device. Take care.
You may see/hear the difference of the two wavelength in this video, Godspeed, th-cam.com/video/wiVsT3tueYQ/w-d-xo.html
@@ElRazTheGreat1 Yes you are right it sounds "choppier" to me and I think is more irritating. I am thinking of actually turning the output signal off and on every half second or so to make it even more irritating and disorientating to Mr. Barker. Thanks!
@@Howie875 did it work for you? Did you end up implementing the on and off function?
Hello sir I see you have done several iterations of this may I ask if any of them have worked so far?
Hi, yes they all worked in different levels and situations, Stay Safe,
Hey can you show how you hook this up please?
One more question. I was looking at the frequency response of the Skar tweeter I think you have (www.skaraudio.com/products/vx35-st-3-5-inch-pro-audio-tweeters). The Skar website says the response is 2.2kHZ - 20kHz. My understanding is that dogs react negatively to 25kHz which is just out of audible range for most humans. Does this mean that the Skar speaker can not reproduce the required range? Sorry if this is a stupid question. I’m trying to sort this out.
Did you ever get a response? What did you end up using?
Hey dude, what items are you using? Could you please give me a list? Also, is the frequency audible on start up with your setup if you set it to 20000hz? From your experiments can the tweeters go through debris or some solid objects? I don't think I'll be able to get a clear visible shot at the dog...
Pyle PTA4 amp.
Rolls Testocilator
SKAR VX4-ST tweeter
First of all, thank you very much for your videos.
I live on an island where each house keeps between 2 and 4 dogs. Nobody cares about them barking every day for hours. Even at night time. It's a real plague!! I'm also looking for a working solution where the neighbors themselves don't notice anything.
From your testing, can you recommend anything specific that worked well?
If you have a cellphone you can download deterring sounds from the internet and play them back on a Bluetooth wireless speaker, Godspeed
Hi ElRaz. The testoscillator has two 1/4" jacks for the sine and square wave options. My stereo receiver has 1/8" RCA style jacks. I wonder if your amp also had the RCA style jacks and if so how did you connect the two devices. Did you use an adapter jack and where did you plug into on the amp? The aux port? And did you run just a single wire from the sound generator to a port on your amp? Thanks.
Hello Don, from test oscillator's 1/4" to the amp's RCA auxiliary input jack. I spliced a wire, 1/4" to RCA. stay well, Raz
@@ElRazTheGreat1 Thanks very much.
What would you charge to make this for me? Thank you and standing by.
gotta do what the boss says
That's right, she always put up with me, be well,
I hope you read this Do you have specs and schematic would love to build one
Pyle PTA4 amp.
Rolls Testocilator
SKAR VX4-ST tweeter
She who must be obeyed hath spoken.
Hi ElRaz, I have this little prick across the street bugging me 24/7 and driving me nuts. He's about 70-80 ft from the spot I would like to place a device, which one do you recommend ? Do you think Piezo power canon would be effective? Many thanks for your share!
All animals have different hearing level. You should try and see which method would work best. Installing a tube on the Piezo would increase the intensity and direction of the signal. Stay well,
Can you show a video of you hooking this up for us?
Lmao you got in trouble
yes indeed! grounded for life!
@@ElRazTheGreat1 lol I subscribed
@@ElRazTheGreat1 please subscribe back. Also what did you do with the c-max cells any updates it's been 2years lol I have 3 energi batts 12 banks total
what frequency response is the tweeter? And does it need to be higher than sine frequency?
Pyle PTA4 amp.
Rolls Testocilator
SKAR VX4-ST tweeter
Lol. So it will work on dogs, when will you have one that works on .....well, you know :)
Working on it!
lol it works but the wife dont like it thumbs up and shared
She always puts up with me! Be Well,
Hi sir, what about the kemo signal generator from the previuos video?
Just experimenting my other options, Stay well
On your previous video you recommenced a piezo speaker and not a magnetic tweeter. Have you discovered that this speaker is superior to the piezo?
Still doing tests, the piezo I had gave up the ghost!
From your experiments can the tweeters go through debris or some solid objects? I don't think I'll be able to get a clear visible shot at the dog...
Use a directional tube, stay well
Same results I get out of my Son when I push the button on my "neighbors dog trainer" I keep in the kitchen window!
Youngsters and females have sensitive hearing!
How did you build it? What are the parts and how do you assemble it? I am not very familiar with tech so I do not know how you would build this...
He's not kidding. Turn your volume down.
It's bothering me and the cats.
You and the cats are bothering me. Go back inside. I'm wrapping up in a bit.
Wamen lol xx
URGENT ! Please tell me the frequency that makes my wife go away.
Are you there? I would like to talk to you about this...thanks and standing by.
Hello, how can I help you...
Every dog in the neighborhood is going to be on your front lawn. =)
Oh brother they need to take a number! my wife will be kicking my third member for a while!
did you ever get it to work? Can you please make a video using it on the neighbors dog and have a real life example? If it does work, can you please make an instructional video on how to make one?
Dear viewer, my machine works real well! I am not selling any product/s, on all of my videos I just share what I have experienced. I have tested my machine in many different circumstances/environments with great and positive results. The machine affects rodents, birds, cats, dogs, humans (specially youngsters and kids) strongly and effectively. However there are very strong reactions and legalities involved in this. Human rights, animal rights, municipal regulations and many other ordinances involved in this kind of powerful device! So be responsible in your action and respect the reaction. Stay Safe,
@@ElRazTheGreat1 how did you build it? I am a noob when it comes to tech... Is there a purchase guide of the items and how to assemble it? Also, can you set it to a kilohertz where it is only audible by the dog and not humans?
@@ElRazTheGreat1 how did you build it? I am a noob when it comes to tech/electronics... Is there a purchase guide of the items and how to assemble it? Also, can you set it to a kilohertz where it is only audible by the dog and not humans?
Hey man , I am trying to copy this guy (see link and read Ronnie's review). www.amazon.com/Kemo-Electronic-4330881478-Ultrasonic-Generator/dp/B00NRH95AY/ref=cm_cr_srp_d_product_top?ie=UTF8
What do you think? I am not sure what the purpose of the PVC pipes is though... I am thinking of using everything he has except maybe substitute a 12V led plug in strip for a computer power supply and substitute a car horn instead of the marine amp?
I would experiment with Ronnie's and find the conditions that may help and work. It's matter of trial and error.
@@ElRazTheGreat1 From your experiments how much can the noise, assuming it's powerful, penetrate debris or solid objects? Also, What's the purpose of the PVC pipes in Ronnie's and in your previous designs?
works great with dogs and cats, now you need to stop that nasty woman