What could the reason be where "I can flash the Luckfox. See it was Ethernet 2, and I was able to change IP. But cant connect to it at all. Always connect refused... Tried different usb cable, tried on PC, 2 laptops.. tried on Win 10&11. Turned off Defender. Ipconfig showed changed IP". Any help would be great.
Hello friend, I use this method on my PS4 slim Baikal B1 11.00, my card is the LuckFox Pico pro but I have a little problem and I would like some guidance if possible, I use it normally but when I turn off the PS4, 90% of the Sometimes I get a kernel panic, it doesn't turn off normally, when I turn on the PS4 a message appears as if I were forced to turn it off, I've tried other types of unlocking but it ends up having the same problem, would you have any suggestions?
This is easily the sweet spot for the PS4 OFW 11.00 jailbreak. A bit of work at the start but it basically auto-injects the exploit at restart which is very good and the Luckfox is only $20-$30 USD at most so a cheap investment. Well explained too.
@@ARG Hi just a question, im planning to do this jailbreak, but how do I do this + use chiaki as well? Do I need to constantly change network settings after jailbreaking the system?
@@JustAyoutubeguy0652 what I would do is jailbreak the ps4 and then use rest mode that way you will not won’t need to run it again every time you play a game and one you get golden running you can connect to WiFi or use a network cable without changing any settings as goldhen will stop the ps4 from updating.
@@ARG this shit don't work just a waste of time and money 3 different boards many different cables and all I got is a crashed ps4 , I hope you get your coin for all the false hood you provided
I get (Failed to reload daemon: Refusing to reload, not enough space available on /run/systemd. Currently, 6.0M are free, but a safety buffer of 16.0M is enforced') then (install completed! rebooting...)
HI JP just out of curiosity what windows platform are you using with the luckfox device? The reason I'm asking is that I've been using Win7 and Win8 and Luckfox engineers have informed me that they haven't tested this board under those environments. After rewatching your video and Modded Warfares video there isnt any mention of the actual windows platform your using, and maybe that's why I and others have had problems. Regards Andy
@@TheChameleon2008 Hi I have been busy the last few days, and was just going through the messages. Your message about writing directly to the Nand of the Luckfox pico pro max, and all I can say, is the last time I was on the Github page the Nand was still in the pipeline. Therefore I decided to revisit the sight, and decided to try your suggestion, and I couldn't believe the difference, not only were the results unbelievably easier, but it ment the memory card was no longer needed. I really appreciate you pointing me in this direction, i was ready to throw the towel in, so thank you so much👍
Thanks for this. Seems straightforward and you explain well, but for some reason my Picomax won't show up as a device on the router. SD card, power, and ethernet cable all tested ok. Waited 15+ mins. Any idea why it might happen or if there's an alternate method?
@@jjss3055 i had the same problem. First i thought it was normal that there was no light so i played half a day to get it working but no luck and it also got very hot so i did a refund and the n2nd one working great.
Excellent video, but the following problem happens to me, when I copy and paste the command lines into putty, cd PPPwn-lucfox chmod +x install_NAND.sh ./inst I get the following error: -bash: ./install_NAND.sh: No such file or directory chmod: cannot access `install_NAND.sh: No such file or directory -bash: ./install_NAND.sh: No such file or directory I will appreciate your help
I have a question when this is done.Can one still access to PlayStation network?Also, you talk about it being able to be turned off so.If we were to use this external and not connected while booting a playstation , would it boot in a stock mode to be able to use to playstation network
Good evening, would you be able to share the files, so I can install them via SD card? NAND didn't work out very well for me I think the SD card is better
I'm not having luck with this, sadly. It always freezes the PS4 after a couple of attempts by the Luckfox to Jailbreak it. I hope someone replies to this.
So you are on 11.00 and had no issues using the pc to jailbreak it? Are you using the same network cable you used when doing it from the pc? When the pico boots up is the light flashing and keeps flashing for the whole time it’s connected ? Last question I promise lol Did you try and create the sd card again and maybe try another sd card? I will try and help you as much as I can.
@ARG Hello, thanks for the questions and follow-up. Fortunately, I fixed the problem. I was on 9.03 back then, and I had Goldhen on my USB, which supposedly doesn't support 9.03. I was guessing that when the jailbreak happens and it tries to copy the Goldhen to the HDD, it freezes the PS4 because the Goldhen I have doesn't support the 9.03 firmware. I have since updated to 11.00, and it is now fixed. I still get crashing and freezing, but those are few and far between. Thank you!
Hey Bro, thank you so much for this. When you released the video, the Github link was matching your video, now it seems they have changed it. Would you mind to update ? Even the installation process on Luckfox has changed...not the same questions ;-(
Unfortunately, as you may have seen my pico lives inside my ps4 now being soldered to the board so I will not be revisiting the setup of this but that being said a good friend of mine and fellow youtube will be doing his over the next couple of days so you can see the latest steps/questions when he does his video here : www.youtube.com/@TheModSmith
@@ARG thank you for your reply. I kinda figured it out but the step where the payload is being loaded from the usb drive makes my PS4 crash lol. Anyway, I will look over your friend video. Keep it up, love you videos. Cheers
@@manouky i have had the same problem! You can fix this by swapping out the stage 2 and usb goldhen from the latest beta release. My ps3 also did the reboot and rebuild databse thing with the luckfox goldhen release and i fixed it now.
@@TheChameleon2008 Hey, thx for idea. I've got lazy (and annoyed) so I used my laptop to jailbreak and upload the payload, then, attached the luckfox when I reboot the PS4 to jailbreal ah.
Hi I have got as far as opening putty and used ip address for host name, hot to black screen which asks for login as, which I typed pico, then it asks for password, which I typed luckfox, and I get access denied, and dont know why? Any help would be much appreciated, regards Andy
@@adrianalvarez3923 hi I looked on github repo where you downloaded luckfox programs from, and there is a issue's list, there was 7 when I last looked. There was a guy who had this issue also, and it turned out to be the micro sd card. He tried 5 different micro sd cards, and the 5th one worked. This is what I find annoying, I have asked this question via this platform and others, and you don't get a reply, which means your left completely in the dark. It's almost like, well mine works.
I have got passed the login in password problem. Try typing root at login as and password as luckfox, and press enter. For some reason some boards dont accept pico as login. Hopefully that might work for you? Let me know how you get on.
If the password is not working then it means it’s not booting to the correct OS so maybe it’s not reading the sd card. Try another sd card or flash the nand version.
@@ARG I don’t know how I did it but I flashed it to the nand Im not using an SD card at all.. and I put the password in putty numerous times and it didn’t work but I put it in Mobaxterm and it worked perfect
9.60 is not mentioned when setting up the luckfox pico so maybe not but saying that you should go ahead and update to 11.00 as no point staying on 9.60, Now if you was on 9.00 then I would say stay on that firmware.
After Soc toolkit created micro sd card, saying it had been created successfully. I installed the micro sd card into my luckfox pico pro max. I connected to pc as instructed. I then ran Putty however pico as login doesn't alwsys work, my board required root as the login, but password was still luckfox. Pressed enter, and all i got was # and nothing else, but you should boot into ubuntu, but thats not happening. Red light is flashing, but its like it doesn't know what to do, its as if it dont know the memory card even exists. Anybody have any idea ? Regards Andy
You only need the internet when setting it up as it grabs files from the GitHub repository but after that when you use it on the ps4 to jailbreak you don’t need internet.
Quick question if i turn off my ps4 and i turn it on again without plugging in the usb does it auto jailbreak itself without usb or do i have to plug in the usb everytime i turn it on?
Maybe it's just me, but I did everything step by step and it won't hack the console. Now I already jailbroke the PS4 via computer with the Ethernet cable connected and golden and got it working that way. It just won't work with the luckfox pro Max connected to the PS4 directly. Any words of advice?
Same questions to you bro. So you are on 11.00 and had no issues using the pc to jailbreak it? Are you using the same network cable you used when doing it from the pc? When the pico boots up is the light flashing and keeps flashing for the whole time it’s connected ? Last question I promise lol Did you try and create the sd card again and maybe try another sd card? I will try and help you as much as I can.
@@ARGYes I'm on firmware 11.00 and had no issues jailbreaking using my PC. I'm using the same Ethernet cable that I used while jailbreaking from my PC. When the Pico Max boots up it flashes very fast for the first time, then blinks every second slowly after that. No I haven't tried recreating the SD card yet, I was going to do that to see if that was the issue. Well I can try another SD card, I ordered a 2 pack from Amazon but I don't think it's that because they are brand new, but I'll give it a shot and let you know if recreating the SD card did the trick. Thanks for getting back to me and trying to help me out. I really appreciate it, and I love channel.
@@CustomGamerModsgreat news, I have made a case for the luckfox pico and I will be sharing the stl file so everyone can print or get one printed by pcb way. Not sure if you seen the community post I did showing my atomic purple one.
@@ARG yeah I seen the luckfox box, I'd probably buy it off of pcb way. Thanks for the heads up tho, can't wait to see the video of you hardwiring it to the PS4. Now that's going to be sick, if it's easy I'll probably do that same mod.
I think I must have a faulty product then. I have created the micro sd card successfully. However when I connect via the usb and the lan and run putty pico didnt work as user I had to use root and password was luckfox, but I press enter I just get a # and nothing else ubuntu doesn't even run. I contacted the seller, but he doesn't seem sure either. However I know I get the same outcome regardless if the micro sd card is present or not, which says to me the image on the sd card isnt being accessed. It's like the luckfox pico pro max don't know there's even a card present.
If you are asking if there is a untethered jailbreak so you never need to do it with a laptop again then no and I don’t think they will ever make one due to the way it works.
yup, i have done it but at first i had mad problems with ps4 getting stuck while it is trying ti jailbreak it so i replaced the stage 2 file from the nand release with the goldhen version that worked fine before with the ethernet adapter and it works perfectly now.
What I don't understand is why there are different Ubuntu images for different picos. It suggests that there is some software installed that is device specific, but there is no information about what's going on, just instructions for what to do. I also find it a bit depressing that there is no linux version of the setup, given he clearly knows linux enough to put together the device specific images. I imagine there must be a linux version of the SocToolKit about… Sorry, I know none of this is your problem as you aren't the guy who came out with it. Carry on doing good things. 🙂
yes here is the current list of supported firmware as of the time of this message 9.00 9.60 10.00 10.01 11.00 You can find out more here github.com/0x1iii1ii/PPPwn-Luckfox?tab=readme-ov-file
man too complicated. when FW9.00 got jailbreak. all I need is just a USB. now If I want to update to FW11.00 and jailbreak it I need to buy online a that thing in the video.
Hi, I followed the guide and everything works fine! A thousand thanks. Sometimes the PS4 crashes at startup with luckfoxpico and restarts by checking the integrity of the disk. After several attempts the jailbreak works. It's normal?
It can happen as it seems some ps4's can jailbreak instantly every time with no issues and my ps4 takes 3-4 attempts and a friend of mine his ps4 will some times crash just like you have with yours so I would say it's normal and may improve when they bring updates out for the luckfox pico.
Dude... you have halo3odst as your profile.... I wouldn't be dissing on anyone... That Halo you're sporting is TRUE cringe.... I bet Halo cost you your girlfriend. And ruined your life. Now your bitter old man style.
Help me You have selected firmware version 960. Is this correct? (y/n) Enter your choice: y Created symlink /etc/systemd/system/multi-user.target.wants/pppwn.service → /etc/systemd/system/pppwn.service. Failed to reload daemon: Refusing to reload, not enough space available on /run/systemd. Currently, 6.0M are free, but a safety buffer of 16.0M is enforced. install completed! rebooting...
You're the man!
Had some money in my Google play needed getting rid if b4 it expired.
You didn’t have to do that bro but it’s very appreciated ☺️
your video jailbreaking was so clear and step-by-step guide. Lot of knowledge i get from your channel since jailbreaking my nintendo switch .
What could the reason be where "I can flash the Luckfox. See it was Ethernet 2, and I was able to change IP. But cant connect to it at all. Always connect refused... Tried different usb cable, tried on PC, 2 laptops.. tried on Win 10&11. Turned off Defender. Ipconfig showed changed IP". Any help would be great.
Thanks, my luckfox pico arrived today and it worked fine.
Good to hear ☺️
you speak so detail thank you,you can be a good teacher,good than other TH-camrI come from Hong Kong thank you,Way to go!
Wow, thanks!
Hello friend, I use this method on my PS4 slim Baikal B1 11.00, my card is the LuckFox Pico pro but I have a little problem and I would like some guidance if possible, I use it normally but when I turn off the PS4, 90% of the Sometimes I get a kernel panic, it doesn't turn off normally, when I turn on the PS4 a message appears as if I were forced to turn it off, I've tried other types of unlocking but it ends up having the same problem, would you have any suggestions?
This is easily the sweet spot for the PS4 OFW 11.00 jailbreak. A bit of work at the start but it basically auto-injects the exploit at restart which is very good and the Luckfox is only $20-$30 USD at most so a cheap investment. Well explained too.
I can’t wait to do the internal install it will be super clean and stealthy ☺️
@@ARG Hi just a question, im planning to do this jailbreak, but how do I do this + use chiaki as well? Do I need to constantly change network settings after jailbreaking the system?
@@JustAyoutubeguy0652 what I would do is jailbreak the ps4 and then use rest mode that way you will not won’t need to run it again every time you play a game and one you get golden running you can connect to WiFi or use a network cable without changing any settings as goldhen will stop the ps4 from updating.
@@ARG this shit don't work just a waste of time and money 3 different boards many different cables and all I got is a crashed ps4 , I hope you get your coin for all the false hood you provided
@@ernhoto4846sounds like a skill issue to me 😂
I get (Failed to reload daemon: Refusing to reload, not enough space available on /run/systemd. Currently, 6.0M are free, but a safety buffer of 16.0M is enforced') then (install completed! rebooting...)
Did you solve it friend, I also have this problem with the 16GB microsd I use?
I got the same problem
@@eicrypto I ignored the error and plugged it into ps4 and it worked. As long as it says install completed! rebooting. it will work.
HI JP just out of curiosity what windows platform are you using with the luckfox device? The reason I'm asking is that I've been using Win7 and Win8 and Luckfox engineers have informed me that they haven't tested this board under those environments. After rewatching your video and Modded Warfares video there isnt any mention of the actual windows platform your using, and maybe that's why I and others have had problems. Regards Andy
shouldnt really matter since you will be using SSH protocol to login into the pico so you can run the same tools.
@@TheChameleon2008 Hi I have been busy the last few days, and was just going through the messages. Your message about writing directly to the Nand of the Luckfox pico pro max, and all I can say, is the last time I was on the Github page the Nand was still in the pipeline. Therefore I decided to revisit the sight, and decided to try your suggestion, and I couldn't believe the difference, not only were the results unbelievably easier, but it ment the memory card was no longer needed. I really appreciate you pointing me in this direction, i was ready to throw the towel in, so thank you so much👍
I like the idea of mounting one internally. I am going down the N64 cartridge external route.
Thanks for this. Seems straightforward and you explain well, but for some reason my Picomax won't show up as a device on the router. SD card, power, and ethernet cable all tested ok. Waited 15+ mins. Any idea why it might happen or if there's an alternate method?
some don't show so you need to use the IP address, login to your router and look for the device it will be called luckfox
can you install game cheat trainers database offline with this? like in firm 9.0 you can dowload all the trainers to the hard drive
*FINALLY MY BOI JP IS BACK 💜*
good to be back :)
I have a question: How do you know if your device is pro, plus or max?
Is it written in the same piece?
Yeah it’s at on the bottom of the device.
You can see me show this in the video when I do the unboxing part 👍🏼
I did the same but when i plug the power to my RV1106 the led not running like in your video? i tried many times but its not working
its broken, return it. The samething happened to me. The led comes on with replacement.
@@jjss3055 i had the same problem. First i thought it was normal that there was no light so i played half a day to get it working but no luck and it also got very hot so i did a refund and the n2nd one working great.
Mine luckfox pro would not accept pro softwere flash so I used for lover spec luckfox but as I sad I used flash not sd card metod
Excellent video, but the following problem happens to me, when I copy and paste the command lines into putty,
cd PPPwn-lucfox
chmod +x install_NAND.sh
./inst
I get the following error:
-bash: ./install_NAND.sh: No such file or directory
chmod: cannot access `install_NAND.sh: No such file or directory
-bash: ./install_NAND.sh: No such file or directory
I will appreciate your help
I have a question when this is done.Can one still access to PlayStation network?Also, you talk about it being able to be turned off so.If we were to use this external and not connected while booting a playstation , would it boot in a stock mode to be able to use to playstation network
No you can no longer use psn as it would require an update past 11.00 so if you do update then you can no longer use the jailbreak.
Is there a way to do it over Wi-Fi? I have my ps4 already with gold hen and all that, just want to move it to a different room from my pc.
Good evening, would you be able to share the files, so I can install them via SD card?
NAND didn't work out very well for me
I think the SD card is better
I'm not having luck with this, sadly. It always freezes the PS4 after a couple of attempts by the Luckfox to Jailbreak it. I hope someone replies to this.
So you are on 11.00 and had no issues using the pc to jailbreak it?
Are you using the same network cable you used when doing it from the pc?
When the pico boots up is the light flashing and keeps flashing for the whole time it’s connected ?
Last question I promise lol
Did you try and create the sd card again and maybe try another sd card?
I will try and help you as much as I can.
@ARG Hello, thanks for the questions and follow-up. Fortunately, I fixed the problem. I was on 9.03 back then, and I had Goldhen on my USB, which supposedly doesn't support 9.03. I was guessing that when the jailbreak happens and it tries to copy the Goldhen to the HDD, it freezes the PS4 because the Goldhen I have doesn't support the 9.03 firmware. I have since updated to 11.00, and it is now fixed. I still get crashing and freezing, but those are few and far between. Thank you!
Hey Bro, thank you so much for this. When you released the video, the Github link was matching your video, now it seems they have changed it. Would you mind to update ? Even the installation process on Luckfox has changed...not the same questions ;-(
Unfortunately, as you may have seen my pico lives inside my ps4 now being soldered to the board so I will not be revisiting the setup of this but that being said a good friend of mine and fellow youtube will be doing his over the next couple of days so you can see the latest steps/questions when he does his video here : www.youtube.com/@TheModSmith
@@ARG thank you for your reply. I kinda figured it out but the step where the payload is being loaded from the usb drive makes my PS4 crash lol. Anyway, I will look over your friend video. Keep it up, love you videos. Cheers
@@manouky i have had the same problem! You can fix this by swapping out the stage 2 and usb goldhen from the latest beta release. My ps3 also did the reboot and rebuild databse thing with the luckfox goldhen release and i fixed it now.
@@TheChameleon2008 Hey, thx for idea. I've got lazy (and annoyed) so I used my laptop to jailbreak and upload the payload, then, attached the luckfox when I reboot the PS4 to jailbreal ah.
@@manouky yea if files dont match up then you will keep having reboots but now you know what to do :)
Does luckfox always have to be included in the console or is it only done once?
you need to do it every time you turn the console off and on again
How about the ps4 has already jailbroken ? how does the method for that?
hi i dont have any ethernet port on my laptop can i use ethernet adaptor for laptop would i across any problem
Hi I have got as far as opening putty and used ip address for host name, hot to black screen which asks for login as, which I typed pico, then it asks for password, which I typed luckfox, and I get access denied, and dont know why? Any help would be much appreciated, regards Andy
+1 Hello, the same thing happens to me, any solution
@@adrianalvarez3923 hi I looked on github repo where you downloaded luckfox programs from, and there is a issue's list, there was 7 when I last looked. There was a guy who had this issue also, and it turned out to be the micro sd card. He tried 5 different micro sd cards, and the 5th one worked. This is what I find annoying, I have asked this question via this platform and others, and you don't get a reply, which means your left completely in the dark. It's almost like, well mine works.
I have got passed the login in password problem.
Try typing root at login as and password as luckfox, and press enter.
For some reason some boards dont accept pico as login. Hopefully that might work for you? Let me know how you get on.
The Password won’t work for me?? Any advice how to get it to work
If the password is not working then it means it’s not booting to the correct OS so maybe it’s not reading the sd card.
Try another sd card or flash the nand version.
@@ARG I don’t know how I did it but I flashed it to the nand Im not using an SD card at all.. and I put the password in putty numerous times and it didn’t work but I put it in Mobaxterm and it worked perfect
Hello, does this method work with PS4 1216a software version 9.60?
9.60 is not mentioned when setting up the luckfox pico so maybe not but saying that you should go ahead and update to 11.00 as no point staying on 9.60, Now if you was on 9.00 then I would say stay on that firmware.
@@ARG Thank you for your answer, I will probably do just that and update to version 11.00.
Anyone have an idea my luckfox picoplus isn't booting from sd card.
After Soc toolkit created micro sd card, saying it had been created successfully. I installed the micro sd card into my luckfox pico pro max. I connected to pc as instructed. I then ran Putty however pico as login doesn't alwsys work, my board required root as the login, but password was still luckfox. Pressed enter, and all i got was # and nothing else, but you should boot into ubuntu, but thats not happening. Red light is flashing, but its like it doesn't know what to do, its as if it dont know the memory card even exists. Anybody have any idea ? Regards Andy
Did you get this sorted ?
No
I'm getting an error ./install_nand.sh: 59: y: not found ?
I have not seen that error before.
Have you searched online to see if anyone has a solution for you?
Yes I found it myself. The code was wrong and should read .install_SD.sh
How to connect this to ps4? Using ethernet cable or type c to type a power cable?
So, how do you update Goldhen when using the newest version of luckfox pico?
You just add the new version to usb pen drive and the ps4 will use that and make a copy on internal hdd.
@ARG could you make a video on how to install Linux on 11.00 I watched modern warfare's video and couldn't get it to work
so the router needs internet connection or just simply connect the pc to router and luckfox to router
You only need the internet when setting it up as it grabs files from the GitHub repository but after that when you use it on the ps4 to jailbreak you don’t need internet.
what category in router find the ip address of the luckfox
When i enter password "luckfox" it says access denied? Pls helppp
all lower case and username pico
Where can i find the ip?
@@giantbeef4590 you ever figure it out? doing luckfox.lan doesn't work for me and i can't seem to find the IP of my luckfox
hi do we connect LuckFox Pico while booting or after boot does it matter? also can you unplug once done its work for the current session.
plug it in before you boot the ps4 and yes once you see gold hen pop up you can unplug it all if you so wish.
Quick question if i turn off my ps4 and i turn it on again without plugging in the usb does it auto jailbreak itself without usb or do i have to plug in the usb everytime i turn it on?
If you are talking about the usb with goldhen then yes you only need that for the very first jailbreak as it will copy itself to the ps4's hard drive.
thanks man 💪
Maybe it's just me, but I did everything step by step and it won't hack the console. Now I already jailbroke the PS4 via computer with the Ethernet cable connected and golden and got it working that way. It just won't work with the luckfox pro Max connected to the PS4 directly.
Any words of advice?
Same questions to you bro.
So you are on 11.00 and had no issues using the pc to jailbreak it?
Are you using the same network cable you used when doing it from the pc?
When the pico boots up is the light flashing and keeps flashing for the whole time it’s connected ?
Last question I promise lol
Did you try and create the sd card again and maybe try another sd card?
I will try and help you as much as I can.
@@ARGYes I'm on firmware 11.00 and had no issues jailbreaking using my PC. I'm using the same Ethernet cable that I used while jailbreaking from my PC. When the Pico Max boots up it flashes very fast for the first time, then blinks every second slowly after that.
No I haven't tried recreating the SD card yet, I was going to do that to see if that was the issue. Well I can try another SD card, I ordered a 2 pack from Amazon but I don't think it's that because they are brand new, but I'll give it a shot and let you know if recreating the SD card did the trick.
Thanks for getting back to me and trying to help me out. I really appreciate it, and I love channel.
@@ARGUpdate. So I recreated the SD card and it finally worked. Thank you so much for your help.
@@CustomGamerModsgreat news, I have made a case for the luckfox pico and I will be sharing the stl file so everyone can print or get one printed by pcb way.
Not sure if you seen the community post I did showing my atomic purple one.
@@ARG yeah I seen the luckfox box, I'd probably buy it off of pcb way. Thanks for the heads up tho, can't wait to see the video of you hardwiring it to the PS4.
Now that's going to be sick, if it's easy I'll probably do that same mod.
Sometimes console shut down....why??
Hi JP. Do I need the pico connected to my router every time I turn off and on the ps4 ?
No the pico only needs to be connected to router once on setup.
It’s only the ps4 you connect it to every time you completely turn the ps4 off and on.
Thanks for the demo and info, Awesome. Have a great day
Thanks, you too 👍🏼
if higher firmwares than 11.0 can be jailbroken, can this device be used also or does it only work with 11.0 and lower?
you need to be on 11.00 or lower, what firmware are you on?
@@ARG i am on 11.0.
can the luckfox be used in the future for higher firmwares to jailbreak?
@@Aualan if the exploit is via network then yes
@@ARG ok thx👍
good video where did u get that extreme rate play different mat from please
Thanks and it was provided by extremerate as part of me reviewing products from them so I don’t think you can buy them.
@@ARG aww shame cos they look good i want one lol
thank you can i this method use andriod tv box
Do you have to erase the spi flash first, in order to boot from the micro sd card?
Nope it just boots direct from sd card.
I think I must have a faulty product then. I have created the micro sd card successfully. However when I connect via the usb and the lan and run putty pico didnt work as user I had to use root and password was luckfox, but I press enter I just get a # and nothing else ubuntu doesn't even run. I contacted the seller, but he doesn't seem sure either. However I know I get the same outcome regardless if the micro sd card is present or not, which says to me the image on the sd card isnt being accessed. It's like the luckfox pico pro max don't know there's even a card present.
Did you try another sd card ? Maybe the pico is struggling to read it.
@@ARG I have tried 5 different micro sd cards, 2 sandisk 8Gb, 1 intenso 16Gb, 1sandisk ultra 64Gb and a microdrive 128Gb .
Ok yeah sounds like an issue with the pico then
Can i do this on 9.03 ?
❤
No you will need to update to 9.60, 10.00, 10.01 or 11.00 to use the luckfox pico.
Hey Alien, is there another solution of jailbreaking an PS4 without it locking and connect laptop to open the games installed completely?
If you are asking if there is a untethered jailbreak so you never need to do it with a laptop again then no and I don’t think they will ever make one due to the way it works.
@@ARG luckily I have a desktop computer right next to my ps4
@@ARG So you mean every time i have to use my laptop to reopen the games installed even after jailbreaking?
the 1.1 is out that can go on the nand anyone try it yet, hows it work compared to the sd card?
2 of my friends hand done it, Cobbie from switchbrew and the mod smith and it’s easy to do with no issues.
They are both doing videos on it soon.
yup, i have done it but at first i had mad problems with ps4 getting stuck while it is trying ti jailbreak it so i replaced the stage 2 file from the nand release with the goldhen version that worked fine before with the ethernet adapter and it works perfectly now.
What I don't understand is why there are different Ubuntu images for different picos. It suggests that there is some software installed that is device specific, but there is no information about what's going on, just instructions for what to do. I also find it a bit depressing that there is no linux version of the setup, given he clearly knows linux enough to put together the device specific images. I imagine there must be a linux version of the SocToolKit about…
Sorry, I know none of this is your problem as you aren't the guy who came out with it. Carry on doing good things. 🙂
Is Luckfox need every time ethernet connection?
only when you turn the ps4 off so I would use rest mode.
just connect to ps4?...
Great video!
Thanks!☺️
Its Same procedure in plus version?
Yes but when you open the soc tool kit choose 1103 not 1106
Another great video 👍
on a roll 2 videos in 1 day lol
Ha! I have the same neon controller on my wall. Awesome!
They look so cool, got mine from amazon
Does this support 9.60 too now?
yes here is the current list of supported firmware as of the time of this message
9.00
9.60
10.00
10.01
11.00
You can find out more here github.com/0x1iii1ii/PPPwn-Luckfox?tab=readme-ov-file
@@ARG Thanks, placing my order for a luckfox rn! Cheers for the guide!
Does this work with the most current version?
No it’s for 9.00 to 11.00
@@ARG thx
Can that device jailbreak PS5?
That we don’t know yet but as the ps5 has the same exploit it might also be used we need to wait and see on that one but good question.
man too complicated. when FW9.00 got jailbreak. all I need is just a USB. now If I want to update to FW11.00 and jailbreak it I need to buy online a that thing in the video.
Hi, I followed the guide and everything works fine! A thousand thanks. Sometimes the PS4 crashes at startup with luckfoxpico and restarts by checking the integrity of the disk. After several attempts the jailbreak works. It's normal?
It can happen as it seems some ps4's can jailbreak instantly every time with no issues and my ps4 takes 3-4 attempts and a friend of mine his ps4 will some times crash just like you have with yours so I would say it's normal and may improve when they bring updates out for the luckfox pico.
Xin cách lấy ip và thao tác
m noi tieng viet thi co t voi m moi hieu
정말 감사합니다.
성공 했습니다.🎉
Amazing 👍🏼
Man you make want want a ps4 soooo bad!
Hello, nice to see a friendly name in the comments ☺️
Yep! Man I'm so excited to see the next video!
Now i have become a channel member can i get some help on my previous comment thank you
Is the comment on this video?
@@ARG yes buddy
Why is your wallpaper cringe?
I like it lol
Dude... you have halo3odst as your profile....
I wouldn't be dissing on anyone...
That Halo you're sporting is TRUE cringe.... I bet Halo cost you your girlfriend. And ruined your life. Now your bitter old man style.
Hi how are you brother
How I can contact you
Email me aliengamingog@gmail.com
Help me
You have selected firmware version 960. Is this correct? (y/n)
Enter your choice: y
Created symlink /etc/systemd/system/multi-user.target.wants/pppwn.service → /etc/systemd/system/pppwn.service.
Failed to reload daemon: Refusing to reload, not enough space available on /run/systemd. Currently, 6.0M are free, but a safety buffer of 16.0M is enforced.
install completed! rebooting...
Did you select the right chip version for the pico ? I have max / pro so if you have plus you need to select rv1103 NOT 06 like I did.
Resolved?I same problem?
@@ARG yes select rv 1103