Rear Camber Adjustment on a BMW 3 Series - How To DIY
ฝัง
- เผยแพร่เมื่อ 30 พ.ค. 2018
- In this video I show a couple of ways to check the rear camber on a Bmw 320D E90 model, I show a simple DIY method that requires very little tools and could give you a decent result, and I also show you a very accurate way to test it which is also not that expensive.
If I helped ya out and you would like to buy me a drink ko-fi.com/gerardburke
I found this Camber combo setup, something like this could also be made rover.ebay.com/rover/1/5282-5...
Cheap Camber Gauge rover.ebay.com/rover/1/5282-5... This is cheaper than what I paid, I think mine was €30.
Cheap Digital Gauge www.ebay.ie/itm/MAGNETIC-DIGI...
Thanks to everyone who watches my videos, Likes, Shares and or leaves a comment. I appreciate everyone of you.
➢ To support the channel / gerardburke
➢ For business enquiries Email : Burkesgarage01@gmail.com
➢ Our workshop location is Kilmaine Village, Co. Mayo, Ireland
Disclaimer:
GerardBurke is a qualified motor technician who has completed modules & courses in manual handling and all aspects of workshop safety. These videos are not intended to be used by anyone who is not trained and or qualified to carry them out.
Due to factors beyond the control of GerardBurke, I cannot guarantee against improper use or unauthorized modifications of this information. GerardBurke assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GerardBurke recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GerardBurke, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GerardBurke. - ยานยนต์และพาหนะ
Another great simple and to the point video. Looked through TH-cam for this information all-day and found ten people who turned this into a scientific experiment with very little practical implementation. Thanks again Mr Burke
Thanks very much for the kind words.
Probably one of the clearest simple video's I have seen for this on here. Thanks.
Fantastic video which I have not been able to find one on TH-cam as clear and as simple as this one. Thx
Glad you liked it! Thanks for the nice feedback
This video was so informative! Thank you kindly. Hope to do wee adjustment on my X5 soon. Have a lovely week.
Good information..I was really wondering where the camber adjustment will be made in the BMW 320d e90 suspension..is there camber adjustment for front suspension ?
Great information, many people run entirely too much negative camber on their rear wheels. I would like to point out that if you change your camber adjustment you must recheck your toe in/out because that is affected with a change in camber. Good video!
Oh, so you beat me to it only 2 years ago. LOL
Very well done video. Thanks for taking the time to make and post. I've got a similar setup for my Lexus SC430. The camber adjustment is on the other end of the control arm, closer to the wheel. How about toe adjustment for the vehicle?
Thnx you helped me determine which way the lobe of the eccentric bolt and washer sits. The point towards the U weld not away. I figured it needs to lock somehow. Sorted
Very helpful video!
Thanks!
Very informative, thank you
This assumes the wheels are running true right?
We would recommend taking 4 separate measurements by rotating the wheel 90deg each time, then take an average reading of all 4 measurements on each wheel.
You can also calculate the camber angle somewhat accurately using just that long square + caliper/measuring tape.
Arctan((gap @ top of rim - gap @ bottom of rim)/rim diameter) = camber (deg)
For example, atan((1/2”-1/4”)/17”) = 0.841deg.
This describes a wheel that is angled in at the top of the rim by 1/4” (6.35mm), with a 17” wheel.
Thank you. My local tyre shop , having aligned front , told me they cant adjust rear camber as they would need an 'air bag' . I think they said to push the wheel out wards during adjustment. Has anyone heard of that before , since I havent !
Great video!
Thank you Carl
if the negative camber is reduced, lets say from -1 to -.05, which way will the toe adjustment move?
I just had a wheel alignment so the front is taken care of I just have to deal with the back myself? Dealer said no rear camber adjustment but there is!
one of the rear tyre of my car renault scala is wear out from inside edge, is it a negative camber problem ?
Hello.Id like to ask a question hope you can answer.So i took my bmw3.18 for an allignment but they told me that for the rear right tire they couldnt adjust the camber and they dont know why(basically told me to buy kinda everything there is till problem is fixxed) . I tried fixing it myself but adjusting the camber bolts but they are to the maximum and i still have negative camber
i have a same issue and they want me to buy after market camber adjustment for this specific thing which i dont know where to get
Hey so you don’t need to buy a new set of camber bolts I can keep the ones that are already on there right Just readjusting them if fine or do I need new ones ??thanks
Brilliant. . thanks a million for that
Cheers Mike 🙏🙏
Hello. I have performed the same procedure, but now I have "toe in"
how do i get it adjusted back to normal?
okay try this sum out. 650mm (6.5)- 300mm (3)/ 415 mm = 0.8433 For the wheel (15") should be around 5 degree negative camber. Then google sin tan tables. Then check an approx value. does this help .? after ajustment. you managed 2 negative camber. nice.
Will this work on an E46 330ci?
Thanks
does the toe change when you do camber? would like to see this when you do on e60
Great educational video. I really enjoyed it. I am never going to adjust the camber myself; but it provide a quick reference for checking.
Thanks Collin 🙏
Hello
Can misaligned rear wheels cause steering pull to the right side. ? I have problem on my e87 pulling to the right by itself . Thanks.The front wheels are perfectly aligne i checked with optic machine. The rear one are missaligned.
Which model are you working on that's always helps cause some models have different control arms appreciate the info much
Its a 320D E90 2.0 litre engine 163BHP
if this adjustment is off in 325xi would it make it feel like a flat tire in rear feel like it wants to fish tale whenever theres snow or dirt on rd
My bet is on the toe being a little off
Changing camber messes up toe-in as well. You need to adjust both at the same time camber and toe-in.
I have this problem and after the mechanic fix it I drive 500 km and the wells go back inside again what can I do what I need to change to stop doing this ????
Awesome educational video on bmw camber adjustment. Thank you sir.
Thanks for watching Masri
Nice video 👍
Do I need to do this every time I put new tires specially costume tires like 19” /8.5
Hi, what is the torque for tighting the bolt? thank you
5 uggaduggas
Ty u brother
Should we need to left the car . Or ?????
Front camber - 0.3°
Front toe +0.10°
Rear camber -1.5°
Rear toe +0.15°
are u looking for an aprentice i only live 10mins away,i tryd to get into the field before but nothing came up stable anough so ive just been doing abit of landscaping and farming at home im 27 cant say i know much but defo always wanted to be a tech and would be fairly keen in all aspects automotive hope u gimi a bell back to let me know if u will be taken on the road tks
Hello Tom,
Thanks for the comment first of all, My email is in the description should you have any further questions.
To answer your question on hiring an apprentice, I am sorry to say the answer is no, I currently only work with experienced/qualified technicians. The main reason is I simply do not have time to train an apprentice and give him the time needed to grow in this trade. I am very busy each day running the workshop and I fully believe an apprentice needs to have a mechanic shadow him for 2/3 years.
If you are serious about it I encourage you to keep looking, I hope you find something for you.
All the best.
I was thinking that was toe in and out ?
At 12" clock Mine reads 36mm Hahahahaha
When i adjust the camber does it adjust the toe setting as well?
Yes it can have an affect on the toe, always recommended to check toe after camber adjustment. I hope this helps
Only watched this to give mine more negative camber to fit the 19” x5 wheels under lol
Mickey Vicegrips style 132?
Need to go negative as well I'm lowered and my 18s are rubbing on big dips
Then there is me who wants camber
My
I hit a big pothole last night. Now My steering wheel is not aligned with wheels (it’s off center). My steering is also dangerously out of control. Does not feel save to drive. Does anybody have an idea what is wrong?
Sounds like something in out of shape (damaged) I would get it inspected on a lift asap.
Thanks for the reply Gerard. I have it booked into garage tomorrow morning. Let’s hope it’s not too costly.
Rear tie rod had snapped in half. Fixed now
@@scottishpatriot5908 I'm glad it got checked
Walk..
Wouldn't have all these issues with a live axle....
Now your toe is out lol
really?
Those calipers won't be very accurate after scraping them across that square and flopping them on the floor. They're hotdog tongs now.