Shredding tires in our RWD converted Lada Priora
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- Grab some G54 merch here - www.en.garage5...
In this episode we take our RWD and SR20DET swapped Priora out for its first drive after making it roadworthy.
Our instagram / garage__54
Track: Dread Pitt & FireFLY - Takeoff [Magic Release]
Music Provided By: Magic Records
Listen To The Original: bit.ly/2Ro6dsr
Fanlink: fanlink.to/PQz
Track: CryJaxx - Ponder [Magic Free Release]
Music Provided By: Magic Records
Listen To The Original: bit.ly/2MgTzJQ
Fanlink: fanlink.to/ponder
All those crazy projects have turned these guys into awesome fabricators.
It’s a known fact. The best out there start with shitboxes and end up doing insane expensive ones years later.
Are you being sarcastic!?🤔👉😂👍
@@anibalbabilonia1867 no
@@anibalbabilonia1867 no
@Mike B no point doing a quality weld on a piece of junk thatll never be roadworthy lol
Garage 54 is a seriously underrated channel. Keep up the amazing work, love from Canada!
The Russian channel has 3M+ subscribers.
Episode one: Cyril barely says two words
Episode two: Cyril is in danger of taking over Vlad's job
haha
Seriously you guys went from my favorite crazy Russians to absolutely amazing fabricators.
This channel *NEVER* disappoints
I would have to totally concur with you there! 😎
Are you being sarcastic too!?🤔👉😂
Someone: "So how much fabrication did you do?"
Garage 54: "да."
Respect and love from Colorado, although your "goofy" stuff is great fun to watch, I was always hoping you'd dabble in the performance area, and this was cool. I enjoyed the visit to a Russian "speed shop"...Cheers
I'm from 719 sweet to see other Colorado people
Translator is a man of many vocal pitches
That's why people love him he's simply irreplaceable
Thanks, but I don't feel like I have that much range (I think my pitch shifts are pretty hacky, though I am aware of voice over studios that shift the pitch digitally, which sounds pretty terrible). Especially compared to voice actors from the Simpsons, Futurama, Family Guy etc.
@@SwapBlogRU i like the way you change pitches for females and kids differently
@@SwapBlogRU funny words smart man.
We still love you no matter what.
@@SwapBlogRU use the same tone for everyone and edit the individual voices later
BMI.It is really amazing how you can narrate the voice translations of multiple people and do a incredible job of making it to where we can easily and clearly tell who is talking.
Not only badass but cool seeing both lads have more inclusion is cool too!
You can only type not speak, mute homie
That parts shop is amazing! I enjoy seeing more behind the scenes kinda content like that. And their fabrication skills are really good when they take their time & don't "ghetto rig" it to save time, as Vlad has said they've done on past projects.
Thanks BMI Russian as always for the translation!
Wow! What a pretty shop!
It looks like a kickass bong studio!
I don't see why the people of Russia and America shouldn't be best friends. I see places and people in Russia, It feels like parts of America. Great video
Because the US wants to be the world's bully, a police state, and even it loves to tell harsh lies about countries like Russia.
@@Artist1974CH He´s talking about the pople, not the government!
Maybe we'll see changes when people from the "raised by the internet" generation start finding their way into power structures on both sides of the globe.
@@sthenzel There are some open minded Americans who don't mind being friends with the Russians, but there are ignorant ones (the liberals) who think Russians "hacked" the 2016 elections and other ridiculous things.
We are friends
Garage 54 = The best & more entertaining car experiment channel on TH-cam. FACT.
Awesome build Gents. Keen to hear it spool up and listen to the exhaust note.
All the paint in the world isn't going to hide them welds. 😅😅😅👍👍👍
This is the type of work that most mechanics dream about. I'm so envious.
Want to see Ivan more !
He is the backbone of the whole garage!
It's amazing how American that store looks! Russia and America live on forever together! 🇷🇺 🇺🇸
These guys can put together anything
Cool build can't wait to see the finished product.
That song was tight at 7:00 .. love all the way from Texas my friends.
Sick ass little sleeper. Love it.
I like how homeboy lists off everything y'all did.
Now we are getting somewhere! This is the content that i came here for!
Man, that shop is like brick and mortar eBay.
Love the helium voice change lmao
Also, while I love the other content, this stuff is just as good. Hope it gets more views
Lada Priora..........
IVAN EDITION!!!
The Fast and The Furious Russian Edition😁😁 love these guys, they are brilliant mechanics and fabricators 😀
This is one cool project! I like seeing the young lads doing some commentary, it's good to get to know the team!
Some nice drifting by Ivan too!
I'd love to see this car get developed and finished, such a good sleeper!
Only one thing I would change about this, less music so we can hear that beast sing!
Keep it stock outside, this could be a great sleeper.
I love that it wasn't even a closed car park. Theres housewives picking up thier rations and these guys are doing donuts
and the final Testing spot... 11am on a week day at supermarket parking lot, no fvcks given lol Love the channel, cheers from California
This is just brilliant in so many ways. Love it.
Haha nice, it reminds me of what I used to do in my Hyundai Pony.
In the snow/rain
with an open end diff
and 74 WHP.
So this is quite a bit more potent D:
I bet this is sporting a welded diff = has no diff if these guys have kept their style
It actually works! Sweet job guys.
I love a nice big pile of shiny new parts to make my car do stuff it wasn't meant to.
Rwd makes much more sense than fwd
For high performance yes, for Russian snow, not so much
Rwd is extremely nice for drifting an acting a fool...driving in snow and ice not so much i had a chevy cavalier anf i was driving on unplowed roads with almost 1 foot of snow on the ground and people with 4wd jacked up trucks were stuck and i was just putting all around with no problems
12:05 If I had to put words to this tune, it would be: "Burnin rubber... burnin rubber... burnin rubber... etc..."
Wow, this store looks incredibly well stocked. I haven't seen an inventory like that in the US since about 2000, when online ordering became a thing.
Thanks for sharing 👍
loving those store ,its look so complete
realy easy to find parts
Thought this was a Neutral Drop notification!
Definitely one of the best builds guys 👌👍 love all your hard work…keep safe 👍
The best driving I've ever seen on this channel lol
Dear Guys, I've been watching your channel and I love some of the stuff you guys do - they answer so many questions people have about cars ! I've been dreaming for a few years of doing the following: Take 4wd truck (I'm in Canada, so I'm thinking of a pickup truck, but a Van would be even better, if possible). The problem I have with existing trucks is that their beds are way too high ! What if you wanted to put a heavy object in there? You have to lift it about 3' into the air just to get it on to the bed. I want to remove the rear axle and put a dropped trailer axle on the rear, and also modify the frame so that the rear bed is only about 10" off the ground. This will allow so many good uses of the vehicle ! Also, a lot more volume of cargo can be carried if there was a cargo box placed on this as well, and it would be so easy to step into the rear of such a vehicle. Either hub motors must be used on the rear, or a front drive system must be used. With a 4wd donor vehicle, you can remove the propshaft and the rear axle and just run it on the front drive system. I'll be thrilled if this idea makes it into one of your videos, but unlike some other projects, this might actually be a useful one (So I can understand if you don't want to do it haha). All the best from Canada !
There’s lots of lowrider trucks out there. And honestly not a fan of them. Lift kits are popular on trucks for reasons more than looks. You fit larger tires and have more clearance going over things. Lowering a truck reduces its usefulness for most of us. If you REALLY want a lower bed on your truck, look into hydraulic systems and lower it when needed for loading and return to ride height after. Or just use a ramp to load the bed like the rest of us...
Bmi Russian had their work cut out for them in the parts shop.
Had me dying🤣🤣
Beautyful,this only need a exterior tuning. Now is a sleeper
I died when the interpreter changed his tone for the guy at the counter!! He made him sound like a little girl!!LOL 🤣😂👏🏽
Wow that gauge cluster looks real....xopowo!
Makes an perfect sleeper, greetings from Canada.
Good work Cyrill !!!
Sleeper Lada! Sweet!!
Cyril's a very handy fella to have, seems to be able to do anything.
Shorts, sandals and studded tires! 8:37
This is amazing, great build 👍
This channel is really makes some awesome stuff.
Looks like Ivan know how to drive:)
Thanks
I like the 4 lug nut conversion...
Portugal watching... Nice vids
This video made me so happy
That's one hell of a sleeper
Awesome build guys I like it...
8:36 Vlad looks like a German tourist in Greece
This is one of the most happy engine i think
Ladas are awesome
They have dedicated silvia hose kit in NovoSybirsk... while i couldn't get hoses for my stock peugeot 205 in my city...
nice 👍👍👍 i am lada fan i have 4 lada and hi for finland 🇫🇴🇫🇴🇫🇴
SR20DET is a badass motor! - next time, Drop a 2JZ!
That's one fine looking machine!🍸🥴👌
Cool sleeper
i want to see them put an engine like that in a ZAZ968
it will be wheelie monster
nice job comrad
Awesome
Push the pedal to the metal spinning the turbina makes the rear wheels go blyaaat
Project done in one video, other bigger tubers would make at least 10 videos.
great job guys
Awesome! Now you Need Nitrous!
Idea: how much Nitrous Oxide can a Lada motor can take?
All of it, it's a lada engine unkillable 😅
Cleetus McFarland would be proud!
Garage54 can you make an engine that runs all the piston all at the same timing? All piston will do the power stroke at the same time? I am really curious. Please notice meeeee
good idea tho
This would require a custom grind camshaft to open the valves differently than intended, a custom crankshaft to move the pistons in unison, and sadly run very badly. You’d have one big power stroke, and then 3 energy stealing strokes, causing the torque curve of the engine to be a very large peak and then a huge drop off to negative torque. Fun fact, your single piston lawnmower has way more torque than you realize on its combustion stroke, and then goes through what I’ve just described. It’s average is lower but it’s instantaneous torque is immense.
Still want a pulse jet engine on the superlight lada.
SWEET! 👍👍👍
the ultimate sleeper
POV: you get baited on that mesenger ding 0:25
Wtf why dnt we have somewhere like this in the uk. That's mad that shop at the beginning
Insurance and hardly anyone works on their own cars round here. And neighbours report you for having a shit looking car lol
@@georgekurgansky5986 They do if you look around - check out "adaptive engineering anglia" on Google :)
(I have the privilege of saying I helped a very small part with that utterly bonkers car.. brown pants moment when 360 HP breaks traction in a car that weighs less than a gnats fart!)
do more builds like this!!
Nice!
This is the definition of sleeper 😂🤣😂
Fantastic
El Chromino vs Priora...
Can't decide :))
Don't tell Mere
I see they welded the steering knuckles and then poured water on them while it was still hot, doesn't that make the metal brittle?
Very cool. Are you going to install the second front seat?
Very cool
Install a separator between the interior and trunk, also please reinstall the rear bumper onto this car. 😉
nice shop... shops like those died in europe... you buy only via eshops.
Whoa!
that guy made a dream car..
Alternate title.
"Father and son go visit Halfords."
@@uncrustable9923 dont think so but it had the vibes.
@@junatah5903 yeaaa.... i noticed that too........ lol uhhhh....
Epic now put sum good lookin wheels on there
On merchandise ,a warm Russian hat would be cool one with ear flaps you can't get them here in California
Baseball hats are everywhere
This looks like a Russian Honda/Srt but rwd and revs like crazy with that swap. I’m seriously very serious into getting this car imported and replicate this build
It's just a shitty car, not worth importing. Just buy a shit car and weld what you want out of it.
Great video but my only complaint is I would've liked to hear the engine sound while it was drifting instead of music playing in the background