ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Setup my Makita router on my New Genmistu 4040 Pro Cnc from Sainsmart and did some stuff. No more belts or rollers to deal with. The best small cnc out there.
Please Like Subscribe and share. Links below to everything in this video.
Cnc dust boot I'm using
www.thingivers...
/ @davegatton
www.printables...
Affiliate Link “As an Amazon Associate I earn from qualifying purchases.”
Sainsmart 4040 Pro on Amazon
Affiliate link
amzn.to/3NhYg4q
Wire brush set
amzn.to/3pKi8U1
S&R Pot Wire Brush
amzn.to/4228ZUB
Here is a $ 10.00 off coupon if you order directly from Sainsmart.
i.refs.cc/tcBU...
www.sainsmart....
Probe box from James Dean Designs
www.thingivers...
/ wickedartpatreon
www.uniformati...
amzn.to/3ZHjrPX
Affiliate Link to th3d studio. Enter this code at checkout for 5% off your Order
Use code 3DHP5
www.th3dstudio...
/ 2340130806200088
/ jerry3dhp
/ 1859793054033450
If you would Like to Print out my LOGO. www.thingivers...
1 Time donations Welcome at Paypal.com paypal.me/JERR...
Guys Receive 15% off your orders with code 3DHP. Except for Special Filament Packs.
Here is a link to ZYLTECH Web Site .Starting Sept 1st only 5% Off Going Forward..
www.zyltech.com/
www.buymeacoff...
Link to my ETSY Store www.etsy.com/s...
Affiliate Link to Creality 3D
www.creality3d...?sca_ref=329220.Za35SVgWJ5
SUNLU 10% off discount for: 1. Printer S8 2. One KG printer filament 3. 3D print pen
www.sunlu.com?sca_ref=347524.zxwYGHFozp
www.th3dstudio...
Guys and Gals. I got some Cool SWAG Here.
teespring.com/...
/ 499445360414611
/ 3dprintinga. .
/ jerryeknapp
Checkout my page at 3dhp.net/
Try Amazon Prime 30-Day Free Trial
amzn.to/304BKUk
Affiliate Link “As an Amazon Associate I earn from qualifying purchases.”
Amazon USA
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
you can vacume , but you can also add a small bit of copper pipe next to the routerand use air to blow away the wood chips. will make a bigger mess , but save your bits.
love that cyclone!
Cool! Got my 4040 Pro on the St Pats sale. All set up, and moving, but haven't had a chance to cut anything yet. Need to find a permanent home. Also kind of paralyzed on software. Will probably start seeing what I can do with Fusion, as I am familiar with it. But do not want to get locked into a subscription.
Fusion has a possibility for amateurs for free use Don't know how I did it, but just google it.
I love that hourly rate sign🤣 I want to make one for work when the engineers stand next to me rushing me for a part to get done. Also excited to see some resign pours! I want to do that with mine as well.
Informative video, could you provide information as to how did you work up the g-code to resurface the spoil board, Thanks. Keep the experiments going.
To make it really easy, I used a FREE program called G Sender.Once program is opened, its at the top right.
Thanks for your response, being a noobie , am I to understand the program you referred to creates the g-code??@@3DHP
@@billlester3088 I'm still a noob at CNC . Watch different TH-cam videos on G Sender,its easy to figure out.
Hell yeah! Glad you are having fun and learning cnc, welcome to the dark side of our cnc madness! 😂 I am learning cnc routers also and am hooked
Dang it Jerry now I want a CNC.
I'm a noob at CNC as well 😆. Just wondering about running a shop vac for so long
I think most shop vac's will overheat and shut down. There are a few high end ones designed to run though but pricey,so this was the best bang for the buck even though I need to change some things.
Hi. Just seen your video and really enjoyed how you explained your process including your ups and downs.
I'm Kev over here in the UK.
I'm about to jump in on the cnc bandwagon, for my budget it looks like I'll be going with a genmitsu.but I'm undecided between the latest 4030 or the 4040. I want to have the option of using the laser engraving.
In your opinion what are the drawbacks or limitations if any with your machine.
Thanks
Since the weather has been hot here in Vegas. I have not done a lot of work on it but will start as it cools down. I have never tried the 4030 cnc but as far as a laser, I keep my machines separate. 3d Printer, Diode laser engraver, CNC Machine. I'm very happy so far with the 4040 CNC and putting my Makita router on it. Its a small hobby Machine. If I had the money I would buy a Onefinity CNC for around 4,000 dollars.
What kind of materials can it cut and engrave. Does it cut plexiglass and aluminum for signboard makings ? . Thanks and grate video.
Please can I know if you recommend this machine with the Makita motor to cut alluminium?
I have never tried Aluminum. Please watch Aurora Tech TH-cam channel, she has.th-cam.com/video/8YKHPNejVBM/w-d-xo.html
I liked your video. The biggest suggestion I have is to have a shorter intro.
Thank you, I have shortened it to about 10 seconds in newer videos and changed it.
Good stuff!! Im looking to buy this CNC for my Christmas present to me!! Subtacribed!!
With the Makita router being heavier, did you find any issues with that ? Or are there some ways to compensate for example some way to stiffen the Z axis ? Thanks.
I have had no issues yet.
@@3DHP Thanks, glad to hear that. Some other folks reported some flexing. Hey while I'm typing another thing on my mind is setting up a game controller to do manual jogs for easy surfacing. Have you looked into doing that at all ?
@@hv1461 I'm sure it will flex since its not heavy duty,but for the signs I have done on it,was not a problem.I read on a group yesterday of a person using a spacer or block behind the z axis. It is a nice Cnc for the price.
I have some questions and hopefully you can answer them for me. I'm strongly interested in this machine. Does it come with everything ready to go once assembled? Besides the program like fusion 360 or another is there anything else I would need to buy? And lastly will this work with a Macbook?
It comes with a small spindle that works but I put my Makita on it .Had to get a 65 mm bracket for the Makita. You will need some sort of dust extraction.Some shop vacs work but depends on how long you will be running machine as to which one you buy. Great little cnc in my opinion.
@@3DHP do you know if it will work with a Macbook?
@@dgm6277 It depends on the controller software you run.UGS, Candle etc.
Intro too long (and noisy).
Thank you its been changed.