3 out 5 difficulty and 3 hrs if you are an Infiniti/nissan certified mechanic, have a car lift, remove front tires and inner fenders. In other words, pay a performance shop $500 install plus HE cost and coolant cost. Nice video...I like the protective tape on the headlight lenses and backwards approach to the connectors/harnesses thru inner fender removal.
My 2017 Q50 recently got totaled on only one month of ownership... front sub-frame damage including the condenser and radiator damaged... My insurance claims it as "TOTAL LOSS" This video gives me hope to rebuild it, I have finally decided tonight to keep my Q50. The search for parts begins.
@mishimoto automotive Appreciate the video and the data that's been published on outlet temperatures with this unit. Couple areas I've been concerned with is the pumps ability to operate with a larger exchanger unit (and more resistance), as well as the larger heat exchanger blocking the engine radiator. Do you have any data or other information to ensure these are OK?
Can you give an estimated date for the release? I understand that this is still in the R&D phase. “You have to walk before you can run” it doesn’t give me general idea of when it’ll be out to the public. Would really love to have this on my q60. Huge Mishimoto fan.
ive noticed the oem radiator (pushed back) wasnt pulled forward into original position after new hx was installed, is that how it's suppose to be like ?
After installing this on my red sport I turned my car back on and my check engine light came on. Could it be because I might have missed connecting a sensor?
The secondary pump move coolant from the heat exchanger to the water to air intercooler. This is an independent system from the rest of the cooling system.
Check out our engineering blog for information on the release www.mishimoto.com/engineering/category/by-make/infiniti-by-make/q50q60/infiniti-q50-q60-3-0t-performance-heat-exchanger-2016/
Me taking everything off. Puts everything back but.... Still have 2 bolts left over
Lol facts
3 out 5 difficulty and 3 hrs if you are an Infiniti/nissan certified mechanic, have a car lift, remove front tires and inner fenders. In other words, pay a performance shop $500 install plus HE cost and coolant cost. Nice video...I like the protective tape on the headlight lenses and backwards approach to the connectors/harnesses thru inner fender removal.
My 2017 Q50 recently got totaled on only one month of ownership... front sub-frame damage including the condenser and radiator damaged... My insurance claims it as "TOTAL LOSS"
This video gives me hope to rebuild it, I have finally decided tonight to keep my Q50.
The search for parts begins.
How did it go man
Yes how is build ?
all i need is the heat exchanger itself as it comes right? No additional hoses or anything that It should of came with?
Correct!
The best video-manual I had ever seen! Respect!
The amount of pop up clips and bolts to remove... Sheesh!
great process of sowing every step, i think this can be done in a less amount of time, by using an electric ratchet
And less stuff they did way to much extra stuff like removing head light they wasted a lot of time
@mishimoto automotive Appreciate the video and the data that's been published on outlet temperatures with this unit. Couple areas I've been concerned with is the pumps ability to operate with a larger exchanger unit (and more resistance), as well as the larger heat exchanger blocking the engine radiator. Do you have any data or other information to ensure these are OK?
You should not have any problems, however, you are welcome to contact us at support@mishimoto.com if you have any technical questions. Thanks.
Me too great video
It’s hard seeing the tech take off those clips with a pry bar and a pick, just use the clip remover pliers
Where are you guys located? I would like for you guys to install mine
Unfortunately, we do not offer installation services. Sorry!
7:55 what is that blue tank called? I need to buy a new one
The windshield washer reservoir?
I had a local shop install this for me because this looked like a bit much lol...but it definitely performs well that’s for sure ! Love your brand 💯
how much did it run you?
How much?
How much did it run you
@@MadeBy_Juice I’m not too sure because I had other things installed at the same time … I’m assuming about 150 bucks for the labor
A lot of the stuff they took off was not needed off.
How's the heat exchanger on q50 3.0t on Gas ? Once installed do I need to tune it will it give me bad rpm readings .. please help ???
No tune is needed
Will this work with a ams auxiliary tank
We do not test our products with those of our competitors. Sorry!
Hi , do get more power with heat exchanger or do feel any different
This does not have a directly influence on power but allows for more to be had.
@@mishimoto I loss power do you think I didn’t bleed it correctly ?
Can you give an estimated date for the release? I understand that this is still in the R&D phase. “You have to walk before you can run” it doesn’t give me general idea of when it’ll be out to the public. Would really love to have this on my q60. Huge Mishimoto fan.
ive noticed the oem radiator (pushed back) wasnt pulled forward into original position after new hx was installed, is that how it's suppose to be like ?
It’s going back to this same spot just did install last night thank u for making this install easy Mishimoto team !!!
The one part they forgot to add, but yea thanks for bringing it up!
this is the answer I was looking for lol
What is the gain , runs cooler or more HP , do you need to retune it ,
This will drop heat exchanger temperatures up to 21°F over stock unit
Does this fit in the Q50 redsport with out any modifications jus plug and play
Yes, this will fit your car without any issues
Is the radiator remains push backward after the heat exchanger in place?
The radiator will be placed back in its original spot after you have made some room for the heat exchanger to go in
Battery have to be disconnected?
Is this heat exchanger compatible with a RHD version of the 3.0t engine
Yes, it should be!
If I put a heat exchanger AMS on my q50s without tune, I could lose horse power in my car? .. My friend told me maybe I will lose the Turbo Boost?
For the heat exchanger a tune would not be needed as this will not affect air flow.
You will not lose HP
AWESOME VIDEO! Thanks for your help and professionalism.
Hi, are there any alternative options to oil cooler for q60 red sport ? Because I can't find this part in my country (Ukraine). Thanks. :)
Unfortunately we do not have a oil cooler for the Q50 at the moment.
@@mishimoto thanks)
After installing this on my red sport I turned my car back on and my check engine light came on. Could it be because I might have missed connecting a sensor?
This would more than likely be the cause, we recommend pulling the code to see what that might be.
Gershon Hernandez did u have to do any modifications for it to fit your redsport?
How do bleed the system? Old school way?
You will need an airlift system in order to bleed this system, you can see us doing this at 27:10
@@mishimoto Which Airlift system do you recommend?
Thanks for informative video!
Why is there 2 water pumps is that a Optional thing
The secondary pump move coolant from the heat exchanger to the water to air intercooler. This is an independent system from the rest of the cooling system.
Its a redsport thinng.
When will this be released?
Check out our engineering blog for information on the release
www.mishimoto.com/engineering/category/by-make/infiniti-by-make/q50q60/infiniti-q50-q60-3-0t-performance-heat-exchanger-2016/
no woman mechanic in our area. Please add options.
Gosh, it that a girl doing all that?
In the bmw is more easy 😂 and less complicated