Just to thank you CAP after trying and failing more times than I'd like to admit made my first successful offboard lased Maverick attacks and self lased Paveway attacks today with the F-18. I know it probably feels like a small thing but the frustration has been huge :-)!
I have to admit i'm surprised at just how fickle and tangled these systems are. Everything can look right but it doesn't work and then you can't work out what you did wrong so can't get back
One thing to note that I haven't seen in the video. You can also designate a point for the pod by using the helmet mounted display. It's quite easy and also very quick to do. This is my preferred method when I don't have waypoints or mark points set up for the target area.
And for you people that are still scratching their heads after watching this video, you can see why in two seaters you have a weapons and/or radar officer. 😂
I did not understand the reticle states, I also turned the reticle off and in fact, using tpod on Hornet was VERY frustrating. I used undesignate switch too much and got angry why the hell it resets every time. Now it's all clear and I'm ready to try again. Thank you. Maybe I'm biased by years in the Viper, but it works more intuitively in the F-16.
Thank you for this video! I'm still learning...and I had a hard time finding things and getting started in my training missions. Step1, un-STOW (good tip!)...yep, good step #1 I have not seen covered well in other vids. I have definitely saved this video in my DCS watchlist.
As far as I can tell, in DCS version 2.7.1, the target designation diamond on the HUD does not move when slewing the Litening pod; it only jumps to the new location when you press TDC or enter one of the track modes. It does move when slewing the ATFLIR in the equivalent mode.
I think you missed the mini crosshair that shows when depressing TDC in Point or Area mode. It should be used to slew to another target when in "locked" mode.
Hi Cap, there is an article about five prohibited maneuvers in the F-14. #3: No AIM-9 launch with landing flaps and slats extended. Seems to be odd. The "burning through the flaps" part makes sense. But according to that article the slats would cover the IR seeker. However, the AIM-9 seekers heads seem to be forward of the slats so they should not be "covered" by the slats. Am I missing something?
Maybe a related test: can you lock an AIM-9 which is on the right side of an F-14 on a target which is flying left ahead of the F-14 such that the line of site is blocked by the F-14's airframe?
I still sometimes have trouble using the point track on moving targets. I can get the tpod to track targets ok, but if I wait very long before switching to a maverick, the mav seeker slews to the point where the tpod initially acquired the track, not where it is currently looking. I must be doing something wrong.
Any advantage of “area track” compared to just “target designated” modes? Tgt designate you can still slew so why not use it instead? (Guess it makes no diff in the sim, but perhaps different mechanisms/algorithms IRL to stabilize at a point?)
It is worth noting that now (August 16th, 2024) you cannot change the LGB codes in the air. While you can use the UFC to input a "new code", this doesn't actually change the code of the bombs. If you want to have different codes, they need to be changed on the ground.
How do you pause the game like that while still using the systems and have moving targets? That would be a godsend for me to practice systems like that
Excellent and 10 months later, everything covered still seems to be valid. Have there been any changes with all the new updates with regards to functionality?
I lock up a target with the tgp. The flit screen shows an object locked up but when I look through the hud the box around the target isn’t even what’s showing up on my tgp screen...
I have a question, sometimes when I'm using this tpod the reticle on the hud doesn't move around as a slew the tpod but sometimes it does, and im not sure what the difference is... and help would be appreciated
Cap, you going to be doing any videos on Markpoints!!! As in when using the Velocity Vector as TGP point? A-10 TGP is so much easier......thanks for the video.
6:55 for me the diamont is not moving when I slew around. It only updates its position when I do TDC depress again which kinda sucks Am I doing something wrong?
When i try to mount any of the pods on my hornet I have the menu for pods in the rearmament menu but there are no options. Does anyone know if this can be fixed and how?
Just to thank you CAP after trying and failing more times than I'd like to admit made my first successful offboard lased Maverick attacks and self lased Paveway attacks today with the F-18. I know it probably feels like a small thing but the frustration has been huge :-)!
Well done!
I have to admit i'm surprised at just how fickle and tangled these systems are. Everything can look right but it doesn't work and then you can't work out what you did wrong so can't get back
One thing to note that I haven't seen in the video. You can also designate a point for the pod by using the helmet mounted display. It's quite easy and also very quick to do. This is my preferred method when I don't have waypoints or mark points set up for the target area.
thx
Pro tip: watch series at Flixzone. I've been using them for watching all kinds of movies during the lockdown.
@Noah Carl Definitely, been watching on flixzone} for since december myself :)
@Noah Carl definitely, I've been using Flixzone} for months myself :)
How do you do this then?
And for you people that are still scratching their heads after watching this video, you can see why in two seaters you have a weapons and/or radar officer. 😂
lol
I did not understand the reticle states, I also turned the reticle off and in fact, using tpod on Hornet was VERY frustrating. I used undesignate switch too much and got angry why the hell it resets every time. Now it's all clear and I'm ready to try again. Thank you.
Maybe I'm biased by years in the Viper, but it works more intuitively in the F-16.
Great lesson, great pace, very clear and concise. Thanks. I could tell it wasn't working the way I thought it should. Haha.
Thank you so much for this tutorial I've been searching and struggling to find out how to use it for so long
Great videos! Would be marvelous if you'd show everyone the new Harrier heat signature detection marks.
Done, vid arrives tomorrow.
Thank you for this video! I'm still learning...and I had a hard time finding things and getting started in my training missions. Step1, un-STOW (good tip!)...yep, good step #1 I have not seen covered well in other vids. I have definitely saved this video in my DCS watchlist.
As far as I can tell, in DCS version 2.7.1, the target designation diamond on the HUD does not move when slewing the Litening pod; it only jumps to the new location when you press TDC or enter one of the track modes.
It does move when slewing the ATFLIR in the equivalent mode.
I can confirm that. The question is why the diamond does not move? Did you maybe find an answer?
@@FeuchteKlinge Wondering the same... Why did that change and can we fix that somehow?
if I ever become a good virtual hornet pilot, it will be thanks to you Cap !
I think you missed the mini crosshair that shows when depressing TDC in Point or Area mode. It should be used to slew to another target when in "locked" mode.
Dang, I knew we missed something, literally sat there for 30 mins trying to figure out what we missed. Always he way, *sigh*
Thanks for teaching us the fiddly bits and making ace pilots out of everyone cap, the true MVP of dcs tutorials!
I’m surprised EagleDynamics hasn’t hired you yet, thanks for more clear instruction as always.
Thanks for the refresh and great tutorial :)
thx
Mornin' from the West Coast.
Best toturial about this...!
Thanks
I think it's worth mentioning that you cannot go back to "target designated" mode from a track when you're outside the gimbal limits for some reason.
strange, thx
Hi Cap, there is an article about five prohibited maneuvers in the F-14.
#3: No AIM-9 launch with landing flaps and slats extended. Seems to be odd. The "burning through the flaps" part makes sense.
But according to that article the slats would cover the IR seeker. However, the AIM-9 seekers heads seem to be forward of the slats so they should not be "covered" by the slats.
Am I missing something?
the burning the flaps bit is correct but that whole "covers the seeker" sounds like BS someone just made up
Interesting, I think what they're saying is the top portion of the scan zone of the seeker is being masked by the slat?
@@grimreapers ahh that would make sense. no hobs on the f-14 i guess
Maybe a related test: can you lock an AIM-9 which is on the right side of an F-14 on a target which is flying left ahead of the F-14 such that the line of site is blocked by the F-14's airframe?
I still sometimes have trouble using the point track on moving targets. I can get the tpod to track targets ok, but if I wait very long before switching to a maverick, the mav seeker slews to the point where the tpod initially acquired the track, not where it is currently looking. I must be doing something wrong.
Any advantage of “area track” compared to just “target designated” modes? Tgt designate you can still slew so why not use it instead? (Guess it makes no diff in the sim, but perhaps different mechanisms/algorithms IRL to stabilize at a point?)
Not sure yet Fredrik sorry.
You should do one on using the pod with the helmet sight.
It is worth noting that now (August 16th, 2024) you cannot change the LGB codes in the air. While you can use the UFC to input a "new code", this doesn't actually change the code of the bombs. If you want to have different codes, they need to be changed on the ground.
How do you pause the game like that while still using the systems and have moving targets? That would be a godsend for me to practice systems like that
Excellent and 10 months later, everything covered still seems to be valid. Have there been any changes with all the new updates with regards to functionality?
I lock up a target with the tgp. The flit screen shows an object locked up but when I look through the hud the box around the target isn’t even what’s showing up on my tgp screen...
Can you make a new video - showing how to transfer TGT lock from ATFLIR to MAV missile?
rgr
Holy shit it’s that easy to select a target via waypoints. I could never figure it out I m the harrier. This seems damn simple.
I have a question, sometimes when I'm using this tpod the reticle on the hud doesn't move around as a slew the tpod but sometimes it does, and im not sure what the difference is... and help would be appreciated
wich one would be the better one between this one and the other avaliable.pod
I don't know why but when I waypoint designate it slewes de tgp a few miles away, any help, PLEASE 😅
Cap, you going to be doing any videos on Markpoints!!! As in when using the Velocity Vector as TGP point? A-10 TGP is so much easier......thanks for the video.
Haven't got time to look into it now, but is this relevant? th-cam.com/video/wUoU5bAdabw/w-d-xo.html
Yes it is relevant.....I haven't flown the F-18 for ages and was looking for it then!! All about the A-10 now :)
When you said "Raid" I was waiting for the "Shadow legends"....it never came :(
good morning Cap
why does my screen look utter muck in comparison - unable to move target..this is fun
6:55 for me the diamont is not moving when I slew around. It only updates its position when I do TDC depress again which kinda sucks
Am I doing something wrong?
I am having issues making targets out on the display, I play VR
I like how he doesnt waste any time ending The video, he is just like: "okay, see you later"
Can someone make a piece of virtual Duct tape to hold the the LTD/R in the on pos? I keep forgetting to turn it back on after firing.
How do I recenter the tgp. Thank you in advance
I usually just click VVSLV to re-center
When i try to mount any of the pods on my hornet I have the menu for pods in the rearmament menu but there are no options. Does anyone know if this can be fixed and how?
single player? multiplayer? Base coalition? please
@@grimreapers right now it is only in single player. Only tested on blue coalition.
How do you use TGP at night?
Preffered the jhmcs
The Raid control doesn't do anything for me. Anyone else having this problem?
If you have a maverick on the other DDI, the RAID will always control the FOV on the maverick, regardless of where the TDC is assigned
Please make tutorial on M2000-C INS Allign its updated.
Done! Vid arrives in 2 days.
@@grimreapers thank you
what is scs right
Sensor Control Switch
@@grimreapers ❤️
I just came back from school and I opened dcs to try the tutorial but I have a fucking update and I have to wait 1 hour and 20 minutes