Thanks for making this video. You really helped me out. Can't wait to get my OmpHobby heli setup on my T 16. I was able to follow your steps and understand everything. Thanks again man. Just figured out the translator settings. I never could have figured this all out with out your video. Thanks again.
Timeline : 00:52 : 새 모델 만들기 Create new model 02:30 : 모델 이름 설정 Model name setup 03:43 : 타이머 설정 Timer setup 07:48 : 비행 모드 설정 Flight mode setup 10:48 : 피치 채널 설정 Create pitch phannel 11:50 : 쓰로틀 홀드 설정 Thrttle HODL setup 14:34 : 커브 생성 Make curves 17:32 : 커브 적용 Attach curves 25:05 : 자이로 설정 Gyro setup 28:40 : 채널 리버스 Channel reverse 29:38 : 채널 모니터 Channel monitor
Hello hello there. So this video was very helpful. You speaking Korean the whole time witch I don't and I was able to get my Juper T 18 pro to function like its supposed to with my 450 heli flybarless system and your settings. I found out that the order is important it get things working right. Amazing. Now I have to upgrade my SD card for the rest of my helicopters. Great job!
I followed these steps, and one servo moves for pitch/throttle, one moves for aileron, and one moves for elevator. They do not seem to be working together. I just realized this is a flybarless setup, and I was trying to use these settings for an old flybarred helicopter. Works great with my flybarless.
항상 팰콘샵이 최고입니다!!
이런 서비스 참ㅠ 항상 감동입니다.
매번 전화 할 때마다 친절하게 응대해주시는ㅠ 팰콘샵은 사랑입니다❤
정말 유익하게 동영상 잘 만들었습니다..설명또한 너무 잘되어있어서 점퍼사용자들한테는 엄청난 정보라고 생각됩니다.
Thanks for making this video. You really helped me out. Can't wait to get my OmpHobby heli setup on my T 16. I was able to follow your steps and understand everything. Thanks again man. Just figured out the translator settings. I never could have figured this all out with out your video. Thanks again.
설명 너무 감사드립니다 이 영상 없었으면 입문도 못할뻔했습니다
너무 감사드립니다~ㅜㅜ
Timeline :
00:52 : 새 모델 만들기 Create new model
02:30 : 모델 이름 설정 Model name setup
03:43 : 타이머 설정 Timer setup
07:48 : 비행 모드 설정 Flight mode setup
10:48 : 피치 채널 설정 Create pitch phannel
11:50 : 쓰로틀 홀드 설정 Thrttle HODL setup
14:34 : 커브 생성 Make curves
17:32 : 커브 적용 Attach curves
25:05 : 자이로 설정 Gyro setup
28:40 : 채널 리버스 Channel reverse
29:38 : 채널 모니터 Channel monitor
Hello hello there. So this video was very helpful. You speaking Korean the whole time witch I don't and I was able to get my Juper T 18 pro to function like its supposed to with my 450 heli flybarless system and your settings. I found out that the order is important it get things working right. Amazing. Now I have to upgrade my SD card for the rest of my helicopters. Great job!
I followed these steps, and one servo moves for pitch/throttle, one moves for aileron, and one moves for elevator. They do not seem to be working together.
I just realized this is a flybarless setup, and I was trying to use these settings for an old flybarred helicopter. Works great with my flybarless.
항상 유익한 정보 감사드립니다!
I found your Gyro set up with different Gyro Idle 1 and Idle 2 in percent well explained in this video !!
Thanks. Very clear and simple with your instruction
제 t16 이군요~
셋팅해주시고 감사합니다
그런데 몇가지 값이 바뀌어서
아무리 찾아봐도 정보가 없어
문의 드릴려 했는데 상세한 내용 이해했습니다
첨 접해본 조종기라 당황했는데
잘사용할수 있겠습니다~
Is the menu on t16 the same as tx16s?
소중한 영상 정말 감사드립니다. 질문하나만 드리겠습니다 모드2 송신기도 채널설정 영상과 똑같이 따라하면 될까요?
모드2는 스로틀과 피치 스틱이 왼쪽입니다. 그 외에는 모드1 과 동일합니다.
위에 돌리는 s1에 좌우 팬 조종을 하고 싶은데 어떻게 변경하면 되는건가요 ?
와우 설마 제가 펠콘샵에 점퍼t16 헬기바인딩 가능하냐고 물어봐서 영상찍어 주시는 건가요????
감동입니다. (아니면 말구 ~~^^)
감사히 잘 시청하고 잘쓰겠습니다 ~~♡♡♡
Thank you! This helped me out a lot to setup my 450L helicopter....
Thanks for your favorable comments.
Спасибо большое!Ваше видео помогло разобраться в аппаратуре и настроить Trex 450pro
Спасибо за ваши положительные комментарии.