Before CNC there was skilled labor. I would think the last step would be case hardening. Very creative with the indexing head. Necessity is the mother of invention. Enjoyed it.
В этом видео прекрасно всё. И то как кернят, а потом сверло уводит от этого отверстия. И термообработка. Заготовка, небось, упрочнена при прокатке. А теперь отпущена, но зато блестит. Главное, что люди хорошие.
Kamu sangat jago, mas Yanto! 👍👏Kamu paham banget sama teknik transformasi logam, dan bisa menguasainya dengan sempurna. Kerjamu tepat dan efisien banget buat bikin alat yang kamu butuhin. Kecepatan dan keahlianmu dalam bikin barang bikin gue ngerasa kagum banget. Gue belajar banyak nonton videomu, makasih ya udah share ilmunya!🤩🙋♂😁
My friend, in the nineties did the same. It will be a little easier if you make a couple of hexagons ground into a cone. The first pass with an acute angle, the second with an obtuse angle.
As an Australian retired toolmaker good job done . However guys wear decent footwear and beware of lathes I witnessed a guy having his left arm torn off from his shoulder plus his left ear ripped off . Just be very cautious they are unforgiving and under estimated as killer machines .
There's a gory video on the Internet of a Russian guy killed by a lathe. His coat sleeve got caught and his whole body got pulled in and shredded. Absolutely gruesome.
@@davidkim4083 I saw the video...horrible death for the poor guy. It reminded me of an incident years ago in school. A guy had a scarf around his neck while operating a lathe. He knew better and everyone was clearly instructed about the safety and what NOT to do. Anyway, the damned thing got caught in the spindle while it very fortunately ran low RPM. The guy next to the idiot was aware of the situation and immediately hammered the emergency stop. The idiot returned to school after a few days off with a very clear strangulation mark around his neck. It was a while before he got near a lathe again and he was more than lucky nothing bad happened to him. Machinery in a pro workshop can kill careless operators!
Take good care of your lathe and she will take good care of you.....Very Well Done!!! : ) I can imagine hearing the complaints from a group of spoiled tool makers assigned to make that socket using your tools and techniques.
Это конечно не Пакистан, трёхкулачковый патрон заготовку центрирует. И делительная головка какая-никакая - в Пакистане бы мелом шестиугольник разметили. Но есть же оправка в заднюю бабку для прошивки внутренних шестигранников.
молодцы нормально делают ,но можно и не заморачиваться просто просверлить одно отверстие в центре нагреть на горне и забить шестигранник с начало конусный потом прямой ,когда то мы так наборы делали во времена дефицита.
Как-то не припомню про дефицит инструментов особенно при совдепии, я досих пор пользуюсь теми запасами, взял как-то набор метчиков , и плашек всех размеров штук 150 качество не Китай работает досих пор
did the same in the 80's only for non standard bolts - but nobody does like this anymore in the 21st century its not accurate neither has the hardness or strength to withstand high torque, its is costlier less accurate and more time spent.
Te falta golpe cuando haces el Hexágono y una vez terminado,lo tendrías que Templar al Tubo en Aceite y Kerosene.tendria que ser un hierro del 1045,ese queda joya cuando lo templas 🤗
@@georgeh9967 You severely underestimate the availability of tools (possibly tenth-hand used, but nonetheless there to be had) even in low-tech looking places. Ca Lem has a good video on this - you just shop at the tool flea market instead of a hardware store, and you buy what you can find, not necessarily what you came for. But make no mistake, in a place where a socket wrench truly is unobtanium, there are no functioning lathes.
@@AttilaAsztalos not in a position to walk to the corner hardware store.means. he is far from store /town. maybe rural. it is a saying. and in no way has or means anything about the tools he may have. he did use a lathe and various tools. and in fact has more than i have.
Если есть токарный станок, за это время что он потратил на эту головку, можно выточить деталь за которую заплатят столько, что можно купить набор головок.
@@Yantoo Sorry! I only asked because you showed it in the video! Sir! 🥴 I was just asking what is being built in front of the workshop? Now I can see that it is a well!
![ตรงที่เดิม - ฝน พรสุดา [ต้นฉบับ :เบส ขวางหวัน]](http://i.ytimg.com/vi/c5YnbGEztI8/mqdefault.jpg)
Not sure why it made me smile but all that intricate lathe work and then he bangs a bloody great bolt to make the hex. Brilliant.
He, he...same thought here. All that lathe work and then BAM! He bashes a bolt into the damned thing.
Before CNC there was skilled labor. I would think the last step would be case hardening. Very creative with the indexing head. Necessity is the mother of invention. Enjoyed it.
There are easier ways to make a socket.
Friend, your workshop grows every day, congratulations👍
В этом видео прекрасно всё. И то как кернят, а потом сверло уводит от этого отверстия. И термообработка. Заготовка, небось, упрочнена при прокатке. А теперь отпущена, но зато блестит. Главное, что люди хорошие.
Terimakasih saudaraku ♥️
That put a smile on my face. You have my admiration.
Thanks brother ♥️
Gday, the hex looks perfect, it’s good to see a water bore going in, workshop is looking fantastic mate, cheers
Thanks brother Matty's ♥️
G'day Matty, fancy seeing you here mate lol, did this fella move shops? I haven't watched him in a little while
@@RalfyCustoms Gday, Yanto has started his own workshop, he’s going to do alright to mate,
Estás muy joven y eres un genio Dios te bendiga siempre dándote más sabiduría...desde México
Terimakasih saudaraku ♥️ 🇲🇽🇲🇽
Genius!! I love this stuff. So helpful and SIMPLE!!!
Thank you 🙏🏻
Kamu sangat jago, mas Yanto! 👍👏Kamu paham banget sama teknik transformasi logam, dan bisa menguasainya dengan sempurna. Kerjamu tepat dan efisien banget buat bikin alat yang kamu butuhin. Kecepatan dan keahlianmu dalam bikin barang bikin gue ngerasa kagum banget. Gue belajar banyak nonton videomu, makasih ya udah share ilmunya!🤩🙋♂😁
Terimakasih kangmas Dadier ♥️😍
Como siempre, un trabajo extraordinario más
Gracias maestro saludos desde el Sur de Chile
🇨🇱🇨🇱 Hector ❤️
Interesting handmade tool - respect.⭐️
Frank 🙋♂️ 🇩🇪
Thanks Frank ♥️
Capo Mekanik🙋🏿, saludos desde Argentina, felicitaciones por el taller nuevo ......👌👍
Thanks brother 🇦🇷🇦🇷🇦🇷
Vamos arriba hermano Messin muy bueno excelente, un Abrazo para ti y todos los hermanos Indoneses, desde Uruguay.
Jose Maciel Zamudio ♥️ 🇺🇾🇺🇾🇺🇾
Ottimo lavoro, complimenti... Saluti dall'Italia👋
My friend, in the nineties did the same. It will be a little easier if you make a couple of hexagons ground into a cone. The first pass with an acute angle, the second with an obtuse angle.
До сих пор пользуюсь советскими инструментами , они стоили очень дешиво и было полно
This guy is brilliant.❤ But I think it would be much cheeper to just buy one.😊
Фанатизм - фантазия, грандиозно потресающи. Он без токарного станка на коленке всё зделает
Os meninos estão construindo um poço. Ótimo trabalho.
Terimakasih saudaraku ♥️
This was actually very cool to watch
1:20 pretty scary welding 😢😂🫣
Untuk bahan stainless bisa pake cara yang sama mas ?
Looks like some nice rain starting up.
Sehr schöne Arbeit 😍
Terimakasih Denis ❤️
Am ur fans from Nigeria. Am happy for u, keep it up
Thanks brother Okoro 🇳🇬🇳🇬
厲害👍🏻 ，好酷自己DIY做一個套筒
As an Australian retired toolmaker good job done . However guys wear decent footwear and beware of lathes I witnessed a guy having his left arm torn off from his shoulder plus his left ear ripped off . Just be very cautious they are unforgiving and under estimated as killer machines .
Do you live in Australia now?
@@Kenan_KARA Yes I do just be careful using powerful machines GOOD LUCK and be alert . Cheers
@@kevinklei3005 Thank you.Greetings from Antalia
There's a gory video on the Internet of a Russian guy killed by a lathe. His coat sleeve got caught and his whole body got pulled in and shredded. Absolutely gruesome.
@@davidkim4083 I saw the video...horrible death for the poor guy. It reminded me of an incident years ago in school. A guy had a scarf around his neck while operating a lathe. He knew better and everyone was clearly instructed about the safety and what NOT to do. Anyway, the damned thing got caught in the spindle while it very fortunately ran low RPM. The guy next to the idiot was aware of the situation and immediately hammered the emergency stop. The idiot returned to school after a few days off with a very clear strangulation mark around his neck. It was a while before he got near a lathe again and he was more than lucky nothing bad happened to him. Machinery in a pro workshop can kill careless operators!
Take good care of your lathe and she will take good care of you.....Very Well Done!!! : )
I can imagine hearing the complaints from a group of spoiled tool makers assigned to make that socket using your tools and techniques.
Thanks brother Jimenez ❤️
Meus sinceros comprimentos a os mecânicos torneiros grandes profissionais excelentes trabalhos,
Przepięknia jest ta zrobiona robota przepiękny jest ten cały pomysł z tą nasadką pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍👍
Nice!
wah.. 1 bulan gak mengikuti sudah punya bengkel baru sendiri ya kang... 👍👍👏👏👏
Iya kang.. terimakasih kang David..ini karena dukungan dari jenengan
Very nicely done 🇵🇰🇵🇰
Awesome 👏
That's why my socket set is so expensive!
Más bien pregunta, como hacen el huevo cuadrado
now that's a perfect fit for the bolt 😂
Ud lama ga mmpir. Skrg ud punga mesin sndiri ya mas.
Increíble!!!
años que llevo queriendonver este video muchas gracias
Hola Mesi..m, estas perforando un pozo para extraer agua para la casa?, como vas a extraer el agua?, con un molino de viento?
Saya menggunakan mesin pak
@@Yantoo
Anda menggunakan pompa air submersible tipe pena
私はアルミホイールのセンターキャップを廻す工具が必要になった時に自分でソケットを作りました。2面巾６７ｍｍだったかな？私はフライス盤で作ったのですが、この動画の”熱”と”叩き込み”の方が簡単に出来そうですね。ただ私の場合、叩き込むものがアルミ製の美粧品でしたのでこの方法は無理だったと思いますが。
Well, the first 6 minutes was exactly what I needed to make a revolver barrel. Thanks a lot.. :)
No, just kidding...
Sin ninguna explicación le resta valor al trabajo
very good job brother
Thanks brother Asturias ♥️
Pretty sure I saw this in an OSHA training video titled “How not to do anything”.
Faltó forjarlo al final en aceite para que quedara con mucha dureza de lo contrario si se deja así se va a deformar o romper muy rápido
Alamat bengkel bubutnya di mana pak ..
Excellent job.
Thanks brother ❤️
Excellent job..👍👍👍
Thanks brother Trapper
Mantap udah punya alat sndiri good lah bang semoga makin sukses
Fantastico!
your a genius
Muchas gracias por este video
كل الاحترام
إبداع
Good job.
Top-Job,Sir 👌
Thanks brother Adrian ♥️
Muito bom parabéns pelo trabalho
зачем по сто раз менять сверло? можно же делать по операциям?
хороший кузнец без всякой токарки делает на раз.
الف مبروك على الورشه الجديده الله معك
Aamiin.. Alhamdulillah ♥️
Это конечно не Пакистан, трёхкулачковый патрон заготовку центрирует. И делительная головка какая-никакая - в Пакистане бы мелом шестиугольник разметили. Но есть же оправка в заднюю бабку для прошивки внутренних шестигранников.
Misal sewaktu baja/besi masih merah membara celupkan ke media air/oli di sepuh biasanya tambah keras.
Wow very nice idea good job
Fascinating stuff, I always wanted to see how SnapOn Tools were made.
Lokasi dimn sih bang...???🙏
Как всегда все отлично!
молодцы нормально делают ,но можно и не заморачиваться просто просверлить одно отверстие в центре нагреть на горне и забить шестигранник с начало конусный потом прямой ,когда то мы так наборы делали во времена дефицита.
Как-то не припомню про дефицит инструментов особенно при совдепии, я досих пор пользуюсь теми запасами, взял как-то набор метчиков , и плашек всех размеров штук 150 качество не Китай работает досих пор
Мы так и делали . Только ещё отбивали по окружности на шестиграннике ,что б плотней и чётче было.
Y no sale más barato y rápido comprar uno?
Melhor do que a ferramenta original ! 👍
Sidney Ferreira ❤️
Pesen Deep Socket 8mm, 10mm yg kaya KTC bisa gan
belle douille 👍👍
Basic, old school. That's how things was done before CNC, hydro-jets and order catalogs.
did the same in the 80's only for non standard bolts - but nobody does like this anymore in the 21st century its not accurate neither has the hardness or strength to withstand high torque, its is costlier less accurate and more time spent.
Te falta golpe cuando haces el Hexágono y una vez terminado,lo tendrías que Templar al Tubo en Aceite y Kerosene.tendria que ser un hierro del 1045,ese queda joya cuando lo templas 🤗
Excellent!! :)
Karyamu mendunia bro. Yang coment kebanyakan orang luar negeri . Hebatt. Ada nomor tlp/WA BOS
I love this
pindah lokasi ngendi mas, sue ra dolan ketandan
7:48 That's really smart👍
Now - call Biltema ! They selling stuff like this ! :-)
Thanks brother ♥️
Mau pesan bikin kunci atau spesial tool mas.
Pretty sure , the cost of electricity, and oxy/ acetelyne used, was more than what a nice, new impact socket costs.But.. gotta have fun.
does not look like he is in a position to walk to the corner hardware store
@@georgeh9967 You severely underestimate the availability of tools (possibly tenth-hand used, but nonetheless there to be had) even in low-tech looking places. Ca Lem has a good video on this - you just shop at the tool flea market instead of a hardware store, and you buy what you can find, not necessarily what you came for. But make no mistake, in a place where a socket wrench truly is unobtanium, there are no functioning lathes.
@@AttilaAsztalos not in a position to walk to the corner hardware store.means. he is far from store /town. maybe rural. it is a saying. and in no way has or means anything about the tools he may have. he did use a lathe and various tools. and in fact has more than i have.
Hadir nyimak boss ku suksesselalu buatbossku 👍👍👍💪💪💪
Hey Yanto, are you guys sinking a well?
Wakodahatchee Chris
we made a well by drilling a hole in the ground at a depth of 29 meters brother Chris
@@Yantoo I thought I recognized that. Thanks!
Nice jnb from Pakistan
Thanks brother Shahzad
Если есть токарный станок, за это время что он потратил на эту головку, можно выточить деталь за которую заплатят столько, что можно купить набор головок.
Mas itu yg ngelas ganteng amat ya
ESO ES UN GRAN TRABAJO Y UNA GRAN INVERSION EN COSTO HOMBRE MAQUINA ., CONTRA COMPRAR UNO CON EL FABRICANTE . POR MUCHO MENOS DINERO.
Bengkel baru mas...punya sendiri ??
Iya mas Fauzy
Wah sukses...semoga makin rame...
Aamiin mas. Terimakasih support dan doanya mas
Ada kontak yg bisa di hubungi Mas Yanto?
apa saja yang disiapkan sebelum workshop?
Saya menyiapkan tempat dan kunci yang saya anggap penting pak
@@Yantoo Sorry! I only asked because you showed it in the video! Sir! 🥴
I was just asking what is being built in front of the workshop?
Now I can see that it is a well!
Отличная идея!
bikin segi8 bisakah mas .
Mantap betul telnik nya
maseeeh sampeyan bengkele nang purworejo opo magelang niki? aku pengin bubut as seng lubang kotak 8mm...bubut daerahku ga pada iso
Purworejo mas
Snap-on😂
Раньше эти вещи делали в кузницах и быстрее и проще и деталь прогревалась как надо и получалось отлично , а здесь возни много , а результат тот же...
Nice work
Thanks brother ♥️ AR
Para q lo agujero?
Very nice