Replace & code NEW fuel INJECTORS - Diagnosis injectors with INPA [PART 3] - BMW E91 engine N43
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- Diagnosis fuel injectors with INPA - Replace & coding new injectors - [PART 3]
#FuelInjector #NoxCatalyticConverter #30EA #DiagnoseMSD80 #BMWE91 #BMWN43
- BMW E91 2008 Touring engine N43B20A
- Misfire counter detects random misfires?
- Fault code 30EA: nitric oxide catalytic converter, sulphurized
- Hunting the cause of the misfires!
- Situation: Spark plugs and Ignition coils are ok
- All lambda sensors and CCV with valvecover, NOx sensor are replaced with new ones.
- Forced desulphation session and deleting long-term fuel trims are done after new parts.
- Re-learning process is still in progress...
- No any leaks in exhaust or intake system.
- How to Diagnose BMW MSD80 DME with INPA and ISTA-D software
- Diagnosis of injectors; Replace & Coding!
- Fuel injectors have been leaking for a long time; Cause of NOx Catalytic coverter loss of efficiency?
- Chemical tests, Integrators, offset type LTFT, multiplicative type adaptions LTFT, opening time, flow-rate data, electric charge, Voltages,
Learnbits, adaptions, Homogeneous mode, stratified charge mode, Idle and partial load
Let’s continue with the next episode! Stay tuned!
--
Watch this video!
If you liked this video, press the LIKE BUTTON, SUBSCRIBE channel, leave COMMENTS and SHARE content! By doing so, you will be able to support this TH-cam-channel!
Thank you! I appreciate it! 👍
Watch whole BMW E91 with N43 Diagnosis & Maintenance -SERIES from here:
• BMW E91 - Diagnosis an...
Also N43 MOTOR rebuild -SERIES from here:
• BMW E91 N43 MOTOR REBU...
Also POWERDRAIN rebuild -SERIES of BMW E91 with engine N43!
See the whole SERIES from here:
• BMW E91 - DRIVETRAIN R...
--
My purpose is to encourage people to do things themselves!
Plus, this is a nice hobby for myself and at the same time I have the opportunity to save a lot of money by doing all the maintenance myself!
I’m not a professional with cars or motorcycles, I just want to learn how to do things myself.
If you do this service yourself, always check the correct instructions in the official service manuals. This is just my way of doing it!
Jani Voutilainen
You can follow me also in:
/ voutilainenjani
/ jani.voutilainen
/ janivoutilainen
---
Thanks for bimmerprofs!
References:
bimmerprofs.co...
bimmerprofs.co...
bimmerprofs.co...
Thanks for Music:
Defense Matrix by Vyra | / vyramusic
Music promoted by www.free-stock...
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommon...
Hi, I replaced my DeNox catalytic converter by universal DeNox cat with resoldered NOX sensor probe from Aliexpress (I am a pig), works good for a few years well, but I drive only regional country roads, so desulphurations annoyed me, so I solved it with the NOXEM 130 from Bimmerprofs. Now I investigate problem with shaking idle in homogenous mode and too low rpms when deceleration. I am looking forward the next episode from you! Regards from Czech!
i also bought from aliexpress, insta got error 30da (heating) couldnt return my money, cause i installed after 1 year i received. and apparently im out of warranty, so people dont buy sensors from aliexpress xd
Fantastic video thank you
Can you please tell me did you remove f70 fuse for fuel pump? i removed f70, f33, f58,f70 and car starts successfully and running for a while???
Thanks a lot for all your helpfull videos. It helped me replace and fix a lot a lot of issues. I had a mixture code and rough running Engine(no misfure). The injectors were tested and leaking and broken injectors. I Replaced them en coded new index 11. Also put in new bougies and coils. Now I get misfires on cilinder 4 and by checking it the operation smoothness value is way off the limits and I see codes 2D2A 2A0F(dit not have these before). Do you have any ideas what it could be?
Do i have to drive until the misfires stop? It drives awfull now
I also had a 30ea before but deleted the code. Can this be the nox sensor that is giving the misfires?
switch off terminal 15 and terminal 15 means remove the key ?
Hey Jani,
Thanks for this great guide!
I am also in the process of searching and buying new injectors for my E92 320i since the fuel consumption has increased quite a bit lately.
I would like to ask you, these injectors coming with rubber seals on the nozzles or not?
Is there a way to force cleaning the Nox system without software?
Also, could you please share the equipment and software you are using for monitoring? (Cable, tablet, software)
Thank you in advance!
I would also like to know if they come with the rubber seals on or not, let me know if you found out please
Anyone have an ideas what wrong my n43 engine 2 litre petrol car runs smooth if building up speed but the minute you put your foot right down that’s it misfire and loss of most power ??had new dme from bmw fitted by them high pressure fuel senor crank shaft senor camshaft sensor vanons retimed etc?
I know this Is very late but if this happens when flooring it hard then it may be coil packs, if it doesn't happen with smooth acceleration then its probably coil packs.
A, mistä sait suuttimet tohon hintaan ja b, homman pystyy tekee itse mut voinko esim ajaa auton jollekin pajalle jotka lyö uudet arvot autoon?
Täältä: www.leebmann24.de/injektor-1er-3er-5er-6er-13537589048.html
Mutta hinta on nyt kalliimpi (338,88€). Luulen että ovat myyneet nuo index 11. versiot jo pois. Siksi varmaan nyt kalliimpi hinta index 12 polttoainesuuttimille.
En tiedä suostuuko merkkiliike laittamaan asiakkaan itse ostamia auton osia. Kannattaa kysellä paikallisilta nyrkkipajoilta, jos joltain löytyisi tarvittavat softat suuttimien arvojen syöttämiseen.
Проверяются эти форсунки легко. По нику можно посмотреть проблеммы.
Good video except that i had to watch it in mute, what is your tablet set up?
Microsoft Surface Pro 👍
how about injector adaptions on stratified mode? close to zero all?
Hi!
Injector adaptions values on stratified mode are approximately the same values as before the exchange of the injectors.
I will return to them in next videos as well. But at this point, that NOX Catalytic Converter can also mess up this side a bit, I think. So I want to figure it out first.
Thanks for this helpful video. I have also changed all 4 injectors to index 11 as old injectors were leaking and causing misfire. Now the misfire is gone. For 2 days the car drove really good. Also good idle at 600 RPM. But after 2 days the idle is bit rough now. Sometimes RPM jumps from 600 to 700-800 for 1 second and then drops to 600 again. I can feel the sudden vibration. The workshop that changed my injectors didn't coded the injectors as they don't have the software to do that. Also old adaptations are not deleted yet. Do you think this problem is due to not coding the injectors?
I have already booked an appointment with BMW to code the injectors and took care of this sudden RPM jump.
Yes, you need to code those injectors to the car with INPA or ISTA-D. Without coding, injctors will spray fuel incorrect amount, and these kind problems will present. Also, if old injectors was leaked long time, you wan't to do forced cleaning process for Nox system and reset adaptations.
I coded the injectors and reset adaptation 3 weeks ago. The car ran fine. But today again the car had jumping RPM issue when stopped. Any idea why this sudden RPM jump happens when car is stopped. Also my Nox sensor was changed 8 months ago.
What code throw for faulty injector. Tq
another great tutorial mate! thanks
got same problem, 30ea appears when 450mg which means cat is on the way, also fuel economy drops down when 30ea is present.
it can still be long enough, as long as you do long autobahn sessions, with speed at least 140km. so then it will be cleaned.
but ye if you drive mainly in the city, soon is on the way too
@@blame182 yeah i know buddy, but i think it is a false economy, if i need to drive a car on motorway for hour or two to clean cat so often, im strongly thinking about noxem, saves my time and fuel
@@say1978 false economy by Eu regulation.
The automobile manufacturer must reduce there fleet consumption or they will be get a penalty payment.
This is the reason why Audi put in the S6 a 3.0TDI Diesel Engine..less consumption, they need to reduce ist and you cant so anything.
Cars today have 150tkm and have Problems you need to buys new spare parts which isn't good for environment but how cares, the do want they want it doesn't need to make sense, they are right.
All because money nothing else, nothing change in the world.
And now you need to do all this shit and take a run to the Autobahn and drive 30min with 120km/h do refix the nox catalysator.
I had 780mg crazy..
I do it every week an drive 160km/h to another city 20km for a coffee to McDonald and back it works but for the environment..
@@TheDarkkus i agree, false economy, EU politicians with they standards (euro8) is actually killing the environment, but like u said, they dont care as long as they get paid at the end of the month
👍👍👍👍👍🙏🙏🙏
Hey buddy, these injectors are index 12 or 11?
13537589048 part number or, i really didn't see this parts number with Index 12.
How much do you pay for one?
Where do you from?
Nice videos, great job help me a lot.
Greetings from Germany :))
Thanks! Great that the videos are helpful! 😊
These injectors are version -11.
Part number is 13537589048. The spare part number is the same in versions 11 and 12!
I ordered those new injectors from Germany at www.leebmann24.de for 195.68 euros per piece.
@@JaniVoutilainen Ok Thanks.
Which index number where the old Injectors?
Look like my Injectors at Zylinders 1 leaks and cant work the opening time out so fast, like the others.
How do you fix you tablet at you car :D.
Looks nice, i need this
Greetings from Germany! 😁✌️
Old was -08 versions.
Injectors are brand new set.
I think that I need to fix Nox system before we can analyze injectors.
But will see how it goes 👍
Unwatchable due to fast speed and brain melting soundtrack 😬
Why the stupid music
Thank you for the feedback! 👍