I 've been ( and my wife, still more) saved by this video; Thanks a lot... I even disassembled the dispendertop, cleaned it and clicked it back in one piece. Fantastic video... Greatings from Antwerp, Belgium!! Dus groeten en doe zo voort.. Go on, doing what you do!! Dirk.
+David Garside Second that, excellent video, thanks for creating it. I think the part could be cleaned pretty easily once you know how to take it apart. Thanks for this great video, I'll be sure to checkout your web site for any future spare part needs.
After taking the "lid off " you do not need to replace it. The inner defuser can be removed or un clipped with a blunt knife, exposing the water path which is the main issue not blocked "jets". It would be good if you ammended your video to to show this simple fix. Which is why Bosch designed the entire soape box to be serviceable.
Hi SV, thank you for your comment, the video was intended to show the causes of problems with the dispenser but there are times when you would have to replace the dispenser top and this video shows how to do that.
Video helped no end and yes I found if you are careful you can remover the inner defuser by unclipping it and gently prising the two pieces apart. Many Thanks.
I don't know any reason why you would ever have to buy a new dispenser lid? What it does not show in the video is that once you have removed the lid you can then open it into two halves to clean the inside properly. Just done mine this morning and it is now as new
Why is it that at some time the detergent in my washing machine is not emptying yet when I start running the machine the water outlet comes with form but the detergent not used, and also another problem when I press start the machine delays to start working and spinning and at some point it stucks at some certain minute counting, it's a nikai washing machine
Thank you for the tips, nice to have some vocabulary to describe my washer problems!. I have a Bosch Axxis. The water stopped going though the jets, it barely trickles down through the back edge of the dispenser box and ends up in the box's drain hole, not pouring in the actual soap box at all. Also, we only use cold water (just in case it might have any relevance). Any ideas?
Hi Talal Al Hadidi, if the softener is going in straight away then it is usually because you are putting too much in which will cause it to go straight so reduce the amount you are putting in.
Quick question i have a Bosch Maxx WFL 1262 and the machine does turn on (ie no lights turn on) I have checked everything other than opening up the machine and testing components. Is there any common problem that this could be ?
Hi Craig, for information to diagnose your problem see our video: How to diagnose washing machine control and program problems www.espares.co.uk/advice/7/1793/how-to-diagnose-washing-machine-control-and-program-problems This will take you through the steps needed to identify a suspect control panel.
I do have a problem on a Logixx 9. Each time we start a program, the jets start with (1) the pre-washing and then (2) the washing powder but also the middle one for the conditionner (it seems). Hence it fills up above the MAX and takes down the conditionner within the first 2 minutes of the program. I cleaned up and checked and opened up a bit. I cannot see a fault with the dispenser. I also reduced the pressure of the water. It carries on doing the same. Any ideas. Many thanks !
***** For more information see another of our videos: th-cam.com/video/VS48G_cwCXo/w-d-xo.html Confirm if both valves are on at the same time. Another possible cause can be pushing the door in to quickly or over filling it as this will cause it to syphon away (check with filling to your normal level and closing in the normal way without starting the machine. if the water goes this is the cause.
I have a Bosch 500 series. my dispenser drawer has no jets. not sure why it is not taking the softener and bleach but it is not stopped up jets. I think it might work with a vaccum somehow
+Robin Sissell If the water is filling quickly from the other compartments and both are active on final rinse the problem is likely to be the dispenser.
Sorry Bettina but even if you put the detergent straight in the drum you can still get mould building up in the dispenser that can cause smells from bacteria. All water fills through the dispenser so if this stays damp mould will grow. For more information watch this video: th-cam.com/video/ifWK9df1qgg/w-d-xo.html
I 've been ( and my wife, still more) saved by this video; Thanks a lot... I even disassembled the dispendertop, cleaned it and clicked it back in one piece. Fantastic video... Greatings from Antwerp, Belgium!! Dus groeten en doe zo voort.. Go on, doing what you do!! Dirk.
Thanks Dirk for the comments, we hope you also have watched the other video relating to this as well:
th-cam.com/video/ifWK9df1qgg/w-d-xo.html
Thanks for showing me the repair. I will definitely be getting any future parts.from espares
Hi, thanks for your comment, it's great to hear that our video has helped you out...and pleased to know that you'll be purchasing from eSpares!
Brilliant, worked for me, although I stripped the dispenser compartment top and cleaned it. It just clips together. Excellent video. 👍🏻
David Garside Thanks for your comments, glad to have helped. :-)
+David Garside Second that, excellent video, thanks for creating it. I think the part could be cleaned pretty easily once you know how to take it apart. Thanks for this great video, I'll be sure to checkout your web site for any future spare part needs.
+Gal Aviel Check out another one of our videos as it should cover what is causing the problem: th-cam.com/video/VS48G_cwCXo/w-d-xo.html
Excellent one of the best for the hard pressed consumer.
After taking the "lid off " you do not need to replace it. The inner defuser can be removed or un clipped with a blunt knife, exposing the water path which is the main issue not blocked "jets". It would be good if you ammended your video to to show this simple fix. Which is why Bosch designed the entire soape box to be serviceable.
Hi SV, thank you for your comment, the video was intended to show the causes of problems with the dispenser but there are times when you would have to replace the dispenser top and this video shows how to do that.
Video helped no end and yes I found if you are careful you can remover the inner defuser by unclipping it and gently prising the two pieces apart. Many Thanks.
Had the same problem just watched this and its solved it. Thank you!
Thanks for the comments Susan.
Thank you very much!
Hi, thanks for your comment. Hope our video has helped you.
Thank you very much ....I managed to fix my machine
Hi, thanks for your comment...nice to hear that our video has helped you! Well done for fixing your washing machine.
Hi I have the same washing machine and I want to buy the exact same thing. How much is it online please ? So I can order
Hi Nana Akua Anima Oteng, just go to our website and put your details in www.espares.co.uk/search/ma856pt1555/washing-machines/dispensers/bosch
I don't know any reason why you would ever have to buy a new dispenser lid? What it does not show in the video is that once you have removed the lid you can then open it into two halves to clean the inside properly. Just done mine this morning and it is now as new
Hi Clare, thank you for your post and the information which will help other people.
Why is it that at some time the detergent in my washing machine is not emptying yet when I start running the machine the water outlet comes with form but the detergent not used, and also another problem when I press start the machine delays to start working and spinning and at some point it stucks at some certain minute counting, it's a nikai washing machine
Great video, helped me a lot, thanks!
+Ray de Vries Thanks for the comment Ray.
Mine is not adding water into the tab I know the reason but I don’t know how to fix it I used hand wash powder
Thank you for the tips, nice to have some vocabulary to describe my washer problems!. I have a Bosch Axxis. The water stopped going though the jets, it barely trickles down through the back edge of the dispenser box and ends up in the box's drain hole, not pouring in the actual soap box at all. Also, we only use cold water (just in case it might have any relevance). Any ideas?
Lisa Reutenauer Hi Lisa, Check out another one of our videos as it should cover what is causing the problem: th-cam.com/video/VS48G_cwCXo/w-d-xo.html
Dear Sir / mine problem is softener go down in the first step not the last ! Would you please tell me what to do ?
Thanks
Hi Talal Al Hadidi, if the softener is going in straight away then it is usually because you are putting too much in which will cause it to go straight so reduce the amount you are putting in.
@@eSpares
Thanks
Quick question i have a Bosch Maxx WFL 1262 and the machine does turn on (ie no lights turn on) I have checked everything other than opening up the machine and testing components. Is there any common problem that this could be ?
Hi Craig, for information to diagnose your problem see our video:
How to diagnose washing machine control and program problems
www.espares.co.uk/advice/7/1793/how-to-diagnose-washing-machine-control-and-program-problems
This will take you through the steps needed to identify a suspect control panel.
I do have a problem on a Logixx 9. Each time we start a program, the jets start with (1) the pre-washing and then (2) the washing powder but also the middle one for the conditionner (it seems). Hence it fills up above the MAX and takes down the conditionner within the first 2 minutes of the program. I cleaned up and checked and opened up a bit. I cannot see a fault with the dispenser. I also reduced the pressure of the water. It carries on doing the same. Any ideas. Many thanks !
***** For more information see another of our videos:
th-cam.com/video/VS48G_cwCXo/w-d-xo.html
Confirm if both valves are on at the same time. Another possible cause can be pushing the door in to quickly or over filling it as this will cause it to syphon away (check with filling to your normal level and closing in the normal way without starting the machine. if the water goes this is the cause.
I have a Bosch 500 series. my dispenser drawer has no jets. not sure why it is not taking the softener and bleach but it is not stopped up jets. I think it might work with a vaccum somehow
+Robin Sissell If the water is filling quickly from the other compartments and both are active on final rinse the problem is likely to be the dispenser.
因有這個影片的教學、讓我把LG2003年的洗衣機、修好了！(從沒有修理洗衣機)○
我们很高兴帮助，并通过点击字幕，你可以在屏幕上添加一个中国的描述。
eSpares (We are happy to have helped)
Bock washer machine is best we have Samsung I have to replace entire soap dispenser because some of jets was clogged
hello I'm from Nigeria
Hi Auwalu Sanyi, thank you for leaving your post and it's lovely to meet you and we hope you enjoy our channel.
Save some money and clean old part with water and compressed air.
Buy soap and conditioner combined tabs,problem solved.
Sorry Bettina but even if you put the detergent straight in the drum you can still get mould building up in the dispenser that can cause smells from bacteria. All water fills through the dispenser so if this stays damp mould will grow. For more information watch this video:
th-cam.com/video/ifWK9df1qgg/w-d-xo.html
Dave Bleach
Mine is not adding water into the tab I know the reason but I don’t know how to fix it I used hand wash powder