When the lift moved when you were adjusting the shelf jack I got a little nervous. I would bolt the unit to the floor for my piece of mind. Nice dream acquisition!!
@@PMPerformance Not only that- but bolting it down will put stress on the joints of the lift. It's designed to move a tiny amount. The first lift I built about a decade ago has worked perfectly since day one, with zero issues or problems. The same for the second one I built 4 or 5 years ago right next to it.
@@arau8310 it will be fine bolted down too. It will still flex where is needs to flex. There is QUITE a bit of slop in those delrin or whatever they are spacers in the rails.
I’ve been using this similar lift for 6 years now and works great. I have the castor setup with metal wheels and I have spun the lift with a 4500 pound car on it alone in our shop. I wouldn’t hesitate to purchase it again! We also installed it ourselves. Two people are needed to raise the posts. The runways are easily positioned with a standard cherry picker and straps. Total setup time was 5 hours without beer! Nice review!
Your car game is STRONG. Love that Z06. Also….you need the battery tender quick disconnects….much cleaner and you can run them to the most convenient place in the car.
I like that you included pricing because that's been one of the biggest problems I have with the purchasing process. Even when going on the smart lifting systems website they don't have pricing and like most of these websites want my email for a quote which always feels off-putting.
Wow, as someone in southwestern Ontario I didn't realize you could get a decent brand 4 post lift *and* get it installed for that cheap. I'm really going to have to look up your installer when I'm ready for it. I don't need the left until I get my next car and raise my garage door, but when I get there in sure I'll be happy for professionals to set it all up for me. For peace of mind if nothing else.
Crazy timing. I just finished installing my 4 post lift.... on my own with dollies 😅 in about 2 days. I'm waiting for my buddy to convert my door to high lift this week before i can throw the cobra on. Great vid!
This video is so helpful, I have the same garage height and I have a c6 Z that I want to stack on a lift with a 2001 SS Camaro underneath which is pretty much exactly the same height as your Cobra. I was second guessing if it would all fit but you just verified what I needed, thank you so much!!
Honestly had no issues assembling my own 4 post lift from lift king with casters, 6 drip pans, center jack tray and the ramps and stops. Only needed wife's help for one part. Highly agree it doesn't need to be mounted to garage floor.
Awesome video. I’ve been wanting to do this but my garage has just a smidge less than 10 feet of height. However, I do have two very low cars in mind for the lift, so I think I can make this work. Many, many thanks for the tips, prices, measurements and everything.
I was thinking of wall mounting it but, at least on mine, I have to hold down a bar to allow the lift to slip past the locks, so I’d literally have to mount it essentially in the same vicinity as it is mounted to the post - as my arms would have to hold the lowering arm and also hold down the lock safety release arm. Also, if it’s mounted to the wall you’re obviously stuck as to where you can move the lift if you need to get it out of the way.
Jakub, Excellent video. Great detail on virtually all aspects. I likely won’t be able to install a lift here, but there are other components and issues covered so well which I should benefit from. Very complete.
I own two 4-post lifts (making my 2-car garage a 4-car garage). I purchased both lifts myself (a Prolift and an Atlas - rated for 8,000 and 9,000 lbs respectively, but the cars I put on them weigh less than half of that). I built/installed both lifts myself, and it's not difficult. Yes- some of the parts are really heavy (the ramp with the hydraulic cylinder and sliding jacks required help to move, but once you get the parts up on wheel dollys or trolly jacks- you can move it around to position it for installation). The rest is relatively easy. If you build the lift, then you know how it works, and can maintain it yourself as well. If you have the space, and your floor can support the weight- one lift will pay for itself in a year or less compared to paying for a storage facility rental space (which where I live costs $300 and up per month).
If you have the room to open up the ceiling it's definitely worth doing. I installed a 2 post in my garage with 9' ceiling height then modified just 6 trusses to a cambered design raising it to 12'. Huge difference my Durango can go up fully can walk under it the whole 9 yards. I don't have a finished ceiling so the cost wasn't bad around 6 hundred.
I have a large 4 post and 2 post lift in my 60*120 garage. Just picked up one of these lifts (mayflower brand) so that I could have a mobile lift. Even though it's an 8000lb lift, it's a bit narrow for a lot of vehicles, but man is it convenient for the average vehicle. Those prices don't seem too bad. I paid about $4k US delivered but I had to put it together. If I get any more I'll definitely get a larger like your EXT
Loving the channel, you are slowly becoming an American with your car/truck selections. I already mildly disliked you for the giant garage and now you get a lift.... seriously though, so happy you get to live your dream as a car guy hang onto it as long as things allow.
Great Video. It’s was hard for me to find any educational videos on this topic 4 years ago when I purchased my lift (from another Toronto area lift supplier / installer). My 3 car garage has a finished ceiling height of 111”. Ended up building a detached 4th car garage/ pool house to accompany my XL size lift. Now I can have one of my cars 6’3” in the air and have drinks under the car every night while watching the sunset over the new pool.
We had a 4 post lift in the house we bought a few years ago, but the seller took it with him. We have the same garage door lift/modification...I had no idea that it was so much to change to the high lift and I didn't know that it was so cheap to install the actual lift.
i know he said he's fine with it not being bolted down but that, sway at 16:11 makes me think other wise. like someone else said, pool noodles or soft cushions for common contact areas will probably save you paint and skull. other than that, nice.
I believe it would still sway like that because the car is in the air so the posts are moving laterally, rather than sliding around on the base. Because the base didn’t move
The 4-post lift is an awesome piece of kit. But the bridge jack is what makes it next-level. You might have been better off with aluminum ramps - they're much easier to move around. Remember to put some rubber liners under the ramps so you don't ruin your garage floor coating.
I recommend you search for rolling garage door it takes less space and perfect for your garage setup ( it roll above the garage opening from the inside)
you know... I wanted a 2 post lift but that jack in the back solves my need for that I think. Although I still need a 2 post if I want to drop the subframes from my Z06 again.
I would kill for that garage! I installed the non ext version in my garage. I did it on my own and yea it took some work, but wasn’t too bad as I used my engine hoist. it’s a little tight for a widebody vette, but it works.
@@itsreallyjakub oh they overhang for sure. It’s not bad though. This was my major concern, but I have a small normal man’s 2 car garage, so I needed to make a choice of either a lift with small footprint, or no lift.
You must the most accommodating wife of all time. So, what special thing does she get to have or do? And, you still have one of the cleanest garages that I have ever seen......
I don’t want to give out incorrect info so check with the lifting company. I believe it only matters when you’re drilling and bolting it to the ground but that’s only my guess
@@itsreallyjakub thank you Jakub. I understand it matters for some installs and not others. I’ll definitely look into it further. The garage looks great! Cabinets and workbenches next on the list?
They targeted me with their Instagram ads and they got me 😂 I think smart lifting systems has flooring companies they can refer you to. I don’t know who did my garage but I don’t like it. It chips fairly easily and they didn’t add enough grippy material so when it’s wet it’s like ice
Thank you for the video. I've been looking at lift options for my garage and my ceilings are about the same height as yours. Did you ever consider the auto stacker?
@Itsreallyjakub Amazing video, love the details and measurements. No BS just facts and information for real world applications. Quick question: What are your garage door measurements and how far into the garage does the door go? I'm currently building a 24x26 and having hard time figuring out where to place a lift in relation to the doors etc. Thanks!
Great video, I have a 4 post lift for my 911 and this would have been extremely helpful when I was going about the process of getting the exact same setup as you (lift master, high lift rails, 4 poster etc). I have 129” of height but I still cannot get an SUV and the 911 on the lift at the same time. Which means I’m stuck with getting another sedan under 69”, right now it’s an e90 bmw coupe - yes, first world problems… You mentioned something about “boxing in” your garage ceiling. Can you tell me more about that process? I’ve never heard of this before. Would it be just engineering specs to modify the roof trusses in the garage? Thanks!
Scratch oil splash pan and just get fumoto valves with tubing and straight into old oil jugs on center jack tray or transmission jack which eliminates oil transferring. Also no crush washers needed anymore.
did you have to reinforce the concrete for the posts? I guess that would apply if you bolted it down. any movement on the post would then crack the cement I guess.
Great video, I have a 4 post lift for my 911 and this would have been extremely helpful when I was going about the process of getting the exact same setup as you (lift master, high lift rails, 4 poster etc). I have 129” of height but I still cannot get an SUV and the 911 on the lift at the same time. Which means I’m stuck with getting another sedan under 67” or 69”, I don’t remember exactly. Right now it’s an e90 BMW coupe - yes, first world problems… there’s just so many nice SUV’s vs sedans. You mentioned something about “boxing in” your garage ceiling. Can you tell me more about that process? I’ve never heard of this before. Would it be just engineering specs to modify the roof trusses in the garage? Thanks!
So where's all your other standard garage stuff? Like tools, car stuff, yard stuff, random junk, etc. I'm jealous of how much room you now have to wildly swing open doors lol
my garage is literally the same height front to back. raised the tracks and installed the same liftmaster opener. need to make final measurements to fit a z06 on top and 599 on the botom.
I got my cobra exhaust tucked up about 1” higher since filming this video. I might not need the race ramps anymore but it would be nice for not having to lift 50lbs haah
Id probably add pool noodles to all the places I know i would run into
Good idea.
Add where the hood would hit...
You can get lots of “pool noodles” off McMaster for less than local store, also different sizes and foam types
This was one of the most informative and helpful garage lift video. Thank you! ❤
I did my best to answer all the same questions I had before I got this
100% agree. All @itsreallyjakub videos are clear and to the point. I love that!
When the lift moved when you were adjusting the shelf jack I got a little nervous. I would bolt the unit to the floor for my piece of mind. Nice dream acquisition!!
the platform is suspended by cables onto metal locks. im pretty sure even if it was bolted down the platform will wiggle like that back and forth
Bolting down will make no difference. It’s not meant to be bolted down.
This thing is over a thousand pounds. It’s not going anywhere
Good to know!
@@PMPerformance Not only that- but bolting it down will put stress on the joints of the lift. It's designed to move a tiny amount. The first lift I built about a decade ago has worked perfectly since day one, with zero issues or problems. The same for the second one I built 4 or 5 years ago right next to it.
@@arau8310 it will be fine bolted down too. It will still flex where is needs to flex. There is QUITE a bit of slop in those delrin or whatever they are spacers in the rails.
Definitely worth letting the pros install it. The difference isn't worth the headache of doing it yourself
I’ve been using this similar lift for 6 years now and works great. I have the castor setup with metal wheels and I have spun the lift with a 4500 pound car on it alone in our shop. I wouldn’t hesitate to purchase it again! We also installed it ourselves. Two people are needed to raise the posts. The runways are easily positioned with a standard cherry picker and straps. Total setup time was 5 hours without beer! Nice review!
Awesome
Your car game is STRONG. Love that Z06. Also….you need the battery tender quick disconnects….much cleaner and you can run them to the most convenient place in the car.
Yeah I’ll figure something out for quick connects
I like that you included pricing because that's been one of the biggest problems I have with the purchasing process.
Even when going on the smart lifting systems website they don't have pricing and like most of these websites want my email for a quote which always feels off-putting.
I get why they do it since some factors (like location) may affect the quote. So I did my best to include everything as best I can
Holy smokes! Look at that terminator! 🔥
😎🐍
If your family is as awesome as your garage and job, you have won my friend. Congrats!
Wow, as someone in southwestern Ontario I didn't realize you could get a decent brand 4 post lift *and* get it installed for that cheap. I'm really going to have to look up your installer when I'm ready for it. I don't need the left until I get my next car and raise my garage door, but when I get there in sure I'll be happy for professionals to set it all up for me. For peace of mind if nothing else.
It’s great you’ll love it
Crazy timing. I just finished installing my 4 post lift.... on my own with dollies 😅 in about 2 days. I'm waiting for my buddy to convert my door to high lift this week before i can throw the cobra on. Great vid!
How many cold ones
@@itsreallyjakub many. Along with curse words and sweat haha
This video is so helpful, I have the same garage height and I have a c6 Z that I want to stack on a lift with a 2001 SS Camaro underneath which is pretty much exactly the same height as your Cobra. I was second guessing if it would all fit but you just verified what I needed, thank you so much!!
Amazing!! Congrats on your new lift 😂🤝
Definitely a dream for me to get a 4 post. I've been getting closer to pulling the trigger. Thanks for the info!
You got my 2 dream cars and the dream lift,lol. A Termi and C6 Z06 best of both worlds.
There are cool reclining mechanic chairs for low clearance like this, super comfy!
Send a link. Put some spaces in it because TH-cam automatically blocks links
There's hope after all I had just about despaired of a solution until I saw in my recommended today. Thank you for the detailed information!
Glad I could help
Honestly had no issues assembling my own 4 post lift from lift king with casters, 6 drip pans, center jack tray and the ramps and stops. Only needed wife's help for one part. Highly agree it doesn't need to be mounted to garage floor.
Great Video Jakub, very informative. Now I just have to see if they are in Manitoba.
Awesome video. I’ve been wanting to do this but my garage has just a smidge less than 10 feet of height. However, I do have two very low cars in mind for the lift, so I think I can make this work. Many, many thanks for the tips, prices, measurements and everything.
Glad I could help! 2 very low cars shouldn’t be a problem
Thanks for putting together such an informative video. You did a SUPER JOB! I have a low-ceiling garage and you've given me hope and inspiration.
Glad it was helpful!
Very detailed view of that lift set up. I think you can also wall mount the pump switch for a super clean install.
I was thinking of wall mounting it but, at least on mine, I have to hold down a bar to allow the lift to slip past the locks, so I’d literally have to mount it essentially in the same vicinity as it is mounted to the post - as my arms would have to hold the lowering arm and also hold down the lock safety release arm.
Also, if it’s mounted to the wall you’re obviously stuck as to where you can move the lift if you need to get it out of the way.
@@capitalexotics Yep this was my thought, I will want to move mine depending on the season and what else I need to store in the garage.
@@capitalexotics they may offer an accessory so you don't have to do that when using a remote wall mounted setup.
Jakub, Excellent video. Great detail on virtually all aspects. I likely won’t be able to install a lift here, but there are other components and issues covered so well which I should benefit from. Very complete.
Glad it was helpful!
I own two 4-post lifts (making my 2-car garage a 4-car garage). I purchased both lifts myself (a Prolift and an Atlas - rated for 8,000 and 9,000 lbs respectively, but the cars I put on them weigh less than half of that). I built/installed both lifts myself, and it's not difficult. Yes- some of the parts are really heavy (the ramp with the hydraulic cylinder and sliding jacks required help to move, but once you get the parts up on wheel dollys or trolly jacks- you can move it around to position it for installation). The rest is relatively easy. If you build the lift, then you know how it works, and can maintain it yourself as well. If you have the space, and your floor can support the weight- one lift will pay for itself in a year or less compared to paying for a storage facility rental space (which where I live costs $300 and up per month).
Awesome
Excellent video, extremely helpful Jakub. Wish my garage in the GTA was as deep as yours.
If you have the room to open up the ceiling it's definitely worth doing. I installed a 2 post in my garage with 9' ceiling height then modified just 6 trusses to a cambered design raising it to 12'. Huge difference my Durango can go up fully can walk under it the whole 9 yards. I don't have a finished ceiling so the cost wasn't bad around 6 hundred.
Great price
Have two 4 post lifts in my two car garage. I had to do the same garage door conversion as well. Love having lifts to work on cars and store them.
Damn, 2! Congrats
@@itsreallyjakub YOU NEED ANOTHER ONE 👀
I need one. That thing looks so handy to have 😄
I love it
Your living the dream. I'm so jealous lol . But in a good way. Take care and help those in needs when you can.
I have a large 4 post and 2 post lift in my 60*120 garage. Just picked up one of these lifts (mayflower brand) so that I could have a mobile lift. Even though it's an 8000lb lift, it's a bit narrow for a lot of vehicles, but man is it convenient for the average vehicle. Those prices don't seem too bad. I paid about $4k US delivered but I had to put it together. If I get any more I'll definitely get a larger like your EXT
The EXT-L is the one you want (that I have) since the posts are wider apart. Love it
Loving the channel, you are slowly becoming an American with your car/truck selections. I already mildly disliked you for the giant garage and now you get a lift.... seriously though, so happy you get to live your dream as a car guy hang onto it as long as things allow.
I am the most American Canadian. Thanks haha and sorry
Great Video. It’s was hard for me to find any educational videos on this topic 4 years ago when I purchased my lift (from another Toronto area lift supplier / installer).
My 3 car garage has a finished ceiling height of 111”. Ended up building a detached 4th car garage/ pool house to accompany my XL size lift. Now I can have one of my cars 6’3” in the air and have drinks under the car every night while watching the sunset over the new pool.
Damn!! Congrats
I'm glad you're a car fan (Chevy & Ford).
No brand loyalty here. Only sick car loyalty
Brother! You are living my DREAM!
We had a 4 post lift in the house we bought a few years ago, but the seller took it with him. We have the same garage door lift/modification...I had no idea that it was so much to change to the high lift and I didn't know that it was so cheap to install the actual lift.
Haha yeah exactly
i know he said he's fine with it not being bolted down but that, sway at 16:11 makes me think other wise.
like someone else said, pool noodles or soft cushions for common contact areas will probably save you paint and skull.
other than that, nice.
I believe it would still sway like that because the car is in the air so the posts are moving laterally, rather than sliding around on the base. Because the base didn’t move
@@itsreallyjakub yeah, im pretty sure it will also wiggle like that due to the way the platform is suspended
@@itsreallyjakubthe people crying about bolting it down are the same ones that swear quickjacks are not safe.
I have the same side mount motor and Atlas lift. Got them about 3 weeks ago. I love them. My ceiling is 10 feet 5.5 inches. I may get another one.
Super cool…would love to get this set up someday. 👍
The 4-post lift is an awesome piece of kit. But the bridge jack is what makes it next-level. You might have been better off with aluminum ramps - they're much easier to move around. Remember to put some rubber liners under the ramps so you don't ruin your garage floor coating.
Watch the video again to alleviate your concern
Well said and well presented!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thank you very much
This is super helpful, Thanks Jakub. I looking to do the same as I add a 4th car in a few years. Cheers
Glad it was helpful!
Excellent!! just when I'm thinking "How do you know when to stop?", you showed your blue tape marking system.
Haha primitive but it works
Been there and done all that...great job!
Loved this video a lot! Thanks, Jakub! Is next Saturday free?
I have the exact same height. This is very useful.
Glad I could help
Dang if that’s a low ceiling garage what do I have? My garage is small but I’m grateful to have a garage. Nice set up man.
It is low for considering a lift in it. But no it’s not 8ft. Thanks
I recommend you search for rolling garage door it takes less space and perfect for your garage setup ( it roll above the garage opening from the inside)
I don’t like the look
Great video! However, TH-cam needs to chill out with these ads every 3-4 minutes. They’re very frustrating.
Great job! Very thorough.
Glad it was helpful!
you know... I wanted a 2 post lift but that jack in the back solves my need for that I think. Although I still need a 2 post if I want to drop the subframes from my Z06 again.
further into the video, I need that shirt. My Z06 is also yellow.
Haha right on. The 4 post with bridge jack serves most purposes but not all. I forget where I got the shirt from
Wow I didn’t realize you own a Lambo. Sweet garage.
Technically I don’t yet, since it’s my sons 😂
@@itsreallyjakub we always want to see our children surpass us
I would kill for that garage!
I installed the non ext version in my garage. I did it on my own and yea it took some work, but wasn’t too bad as I used my engine hoist.
it’s a little tight for a widebody vette, but it works.
Do your tires fit without overhanging on the non ext? My 325’s have less than an inch of clearance on either side
@@itsreallyjakub oh they overhang for sure. It’s not bad though.
This was my major concern, but I have a small normal man’s 2 car garage, so I needed to make a choice of either a lift with small footprint, or no lift.
@@PMPerformance haha good choice
You must the most accommodating wife of all time. So, what special thing does she get to have or do? And, you still have one of the cleanest garages that I have ever seen......
She buys shit on Amazon seemingly everyday. So everyone’s happy lol
@@itsreallyjakub i think they all do that
Mine is 9.5 as well. Was hoping to fit r32, r34, s2000, and rx7 with two lifts. I'll just have to lower them all 😂
Nice! Very Nice!
Did i forgot to say "very nice"!
Great video! Was slab/concrete thickness a consideration or requirement?
I don’t want to give out incorrect info so check with the lifting company. I believe it only matters when you’re drilling and bolting it to the ground but that’s only my guess
@@itsreallyjakub thank you Jakub. I understand it matters for some installs and not others. I’ll definitely look into it further. The garage looks great! Cabinets and workbenches next on the list?
@@tg426 I have those in my other storage area with all my tools 😀
So good. Cant wait for mine.
Hell yeah! Z06 and lift gang
damn man . that is my dream indeed . Gotta keep hustling and one day yes ill be reality . Happy for you tho .
It is quite tempting to have one installed!! Does it matter if the garage floor is sloped to certain degree?
Mine is sloped as you can see by my front and rear height measurements. It does matter, to a certain degree
Any insight on how you picked this lift & company over the others in the GTA? Also any recommendations for flooring companies?
They targeted me with their Instagram ads and they got me 😂
I think smart lifting systems has flooring companies they can refer you to. I don’t know who did my garage but I don’t like it. It chips fairly easily and they didn’t add enough grippy material so when it’s wet it’s like ice
Thank you for the video. I've been looking at lift options for my garage and my ceilings are about the same height as yours. Did you ever consider the auto stacker?
No I never considered that. The price is more than double and you can’t get under your car for oil changes etc
@@itsreallyjakub 👍👍 cool vid thank you.
@Itsreallyjakub Amazing video, love the details and measurements. No BS just facts and information for real world applications.
Quick question: What are your garage door measurements and how far into the garage does the door go? I'm currently building a 24x26 and having hard time figuring out where to place a lift in relation to the doors etc. Thanks!
The doors are 8ft wide. Send me a dm on Instagram and I’ll send you a detailed video of the garage door depth with rails
@@itsreallyjakub sent
with all these measurements considerations it is wise to get it installed by the manufacturer professional installer :) with warranty
This is excellent. Thank you.
Great video, I have a 4 post lift for my 911 and this would have been extremely helpful when I was going about the process of getting the exact same setup as you (lift master, high lift rails, 4 poster etc).
I have 129” of height but I still cannot get an SUV and the 911 on the lift at the same time. Which means I’m stuck with getting another sedan under 69”, right now it’s an e90 bmw coupe - yes, first world problems…
You mentioned something about “boxing in” your garage ceiling. Can you tell me more about that process? I’ve never heard of this before.
Would it be just engineering specs to modify the roof trusses in the garage?
Thanks!
Scratch oil splash pan and just get fumoto valves with tubing and straight into old oil jugs on center jack tray or transmission jack which eliminates oil transferring. Also no crush washers needed anymore.
did you have to reinforce the concrete for the posts? I guess that would apply if you bolted it down. any movement on the post would then crack the cement I guess.
Great video, thanks for all the info. Would this work with a garage height of 8 feet 9 inches?
You will have to measure the cars you are trying to stack
Great video, I have a 4 post lift for my 911 and this would have been extremely helpful when I was going about the process of getting the exact same setup as you (lift master, high lift rails, 4 poster etc).
I have 129” of height but I still cannot get an SUV and the 911 on the lift at the same time. Which means I’m stuck with getting another sedan under 67” or 69”, I don’t remember exactly. Right now it’s an e90 BMW coupe - yes, first world problems… there’s just so many nice SUV’s vs sedans.
You mentioned something about “boxing in” your garage ceiling. Can you tell me more about that process? I’ve never heard of this before.
Would it be just engineering specs to modify the roof trusses in the garage?
Thanks!
Yeah that’s exactly what boxing it in is. If you have the space above, you can modify the trusses and make a cathedral style ceiling rather than flat
@@itsreallyjakub thanks Jakub, keep up with the straight pipe videos, best Canadian reviewers, not like those Throttle House broskis!
great video thanks for the info
I would really recommend a 12 gauge extension cord, especially given current inrush demand of the lift motor.
It was impossible to find a short 12 gauge cord. I don’t want a 25ft bundle sitting on the ground. I’ve had no issues with this setup
So where's all your other standard garage stuff? Like tools, car stuff, yard stuff, random junk, etc. I'm jealous of how much room you now have to wildly swing open doors lol
I have a very large shed
Such a random reference to mention CB and jay cutler lol
When 2 jacked dudes show up from a company with lifting in the name, the reference had to be made 😂
Great video. What do you think of the scissor lifts like Shmee has? I like them because there is no posts to worry about for height etc.
Good for certain purposes
my garage is literally the same height front to back. raised the tracks and installed the same liftmaster opener. need to make final measurements to fit a z06 on top and 599 on the botom.
I think your 599 is slightly lower than my cobra or at least very similar. Should fit!
Great tips and explanations nice cars and the garage also.👍😎🇨🇦
Glad it was helpful!
Is ten feet considered "low" for garages in Canada? I thought the standard for residential garages was 8 feet.
That is a great idea! One question though, is there a adapter to put motorcycles on that lift for winter storage?
Yes they have steel plates you can buy that run the entire center length of the lift so you can put whatever you want up there
great video.
Goals. Hopefully going to be buying a bigger house with a bigger garage in the next couple years lol.
I bought this house for the garage 😂
I have a question for you, man. What exactly do you do for a living? Are you only doing TH-cam?
Yes several years of full time TH-cam
@@itsreallyjakub well I am happy for you because that’s where I want to be. That’s goals.
Nice job, but I'm not sure having slightly tilted ramps that could cause a car to roll and a set of locks to malfunction was the best idea!
The locks won’t malfunction
Hey what kind of maintenance is required for these lifts
I ordered race ramps too….on back order and won’t get them for a few weeks.
I got my cobra exhaust tucked up about 1” higher since filming this video. I might not need the race ramps anymore but it would be nice for not having to lift 50lbs haah
Congrat men! ❤
Also did you think about changing out the 3 individual garage doors into 2 double wide doors? (Instead of a lift)
The thought never crossed my mind
Next mod is gonna be a mini split AC/heat pump for sure lol
so i guess standard concrete depth in our garages is fine? No need to add supports or pour a thicker slab
Yeah that only becomes a factor when you want a 2 post lift
So if Flawless Doors did the install you live a lot closer than I thought to me.
Did you get a c8? Positive i saw you backing it in. And the comment about getting rid of Mercedes
No I just reviewed the c8 not mine
Hey thanks for the video but a 15 amp breaker isn’t enough especially if something is on the same circuit 20 amp would be better
Correct
There's no limit switch to set up so you don't accidentally hit the ceiling?
People have rigged up their own sensors and things
Oh yeah i love it
Will 2 non lowered Hellcats fit in that setup?
Do the math in this video. I doubt it though they’re huge
I have a 8Ft ceiling, can I fit 2 mustangs with a lift like this?
I doubt your Mustang’s are under 4ft plus the ramp
Is there any way you could of just moved you lift to the very back wall then you could avoid having to install the liftmaster?
Not enough space in my garage for that
You're soooooo late to the party Hardyyyy😂😂😂😂
battery tender mounted to the roof, then the leads down to the top vehicle. clean?
Thought about it but don’t want wires hanging from the ceiling, at least for video lol
Does the light damage the paint ?
@@malditougo2615 Sunlight through the windows, yes. Garage lights, no.
Jakub, what is the width and length of your garage? Your garage looks huge compared to my 3-car garage
I never actually measured the width but it’s a 3.5 car garage with probably a bit of extra space than a standard one
Not bolting it to the ground is crazyyyyy