Very useful! I'm looking forward for these tips when upgrading the auto wiper and auto headlights! Is there a guide for a proper retrofitting of fog lights for the smart 453? Thanks a lot and Grettings from Germany
Good evening.i have videos for both on the channel. hopefully tuesday I will be fitting foglights, so hopefully video uploaded either that night or Wednesday. 👍
Hi and thanks for the video. The last update for the Database in the site you linked is "DDT2000 DATABASE UPDATE 11.2021", should I use this one or the one you linked?
When you say application. Do you mean the program or the window on the application does not open. You may need to update your python settings on your computer.
@@mvautomotive7092 Chodzi właśnie program tak jak na końcu filmiku gdzie po wybraniu testera zgodnie wskazane i klikam ok, to nic się nie wyświetla. u mnie nazwa kabla obdlink sx a obecnie mam drugi nowy program ddt4all które widać że wyszukuje elm a nie ma odblink sx i co mogę zrobić>
@@mvautomotive7092 Tu pokazałeś na elm a miło byłoby pokazać na obdlink sx i nie wiem jak wgrać tego kabla obdlink do tego ddt4all bo wyszukuje cały czas elm a nie jako obdlink i jak to zamienić bądź wgrać ten odblink aby wyszukiwał podczas po ustawieniu przed uruchomieniem aplikacji.
hello, I followed all the steps you showed in this video, but I can't find my car Megane III ph2 (year 2015) in the database... do you have any idea why? do you need a newer database?
`How do I establish the ELM327 has the 25k80 chipset? I downloaded the D4A SW and Renault db. Offline this seems to work ok and screens seen on various info videos appear as expected. I connected to the car (Smart For4 W453) but there was little to no activity and the lower screen in D4A SW didn't populate as observed in the installation video. I checked the activity in the cmd prompt background screen and saw after every ECU code there was ''Çan Line -1' or message related to items not available. My guess is the ELM doesn't have the right chipset but have no idea how to test or establish it without breaking the unit open (prefer not to do in case I can return it!)
Outside of opening the device up to have a look it should gave stated in the device description on ordering if it has that chipset. Alot of Chinese versions say but don't actually do. The link is the description is the one I used. Price is good and it works. Check to make sure that device drivers for the elm device are installed on your computer. There are generic packs for them online. Google elm32 driver packs.
Is that charging the battery to only 85%? There is a code for changing the charging power so that you use the full 7kw as opossed to the factory set 4.5kw?
Hey!, I really appreciate your videos, great! I wonder if you can assist me? Talisman 2019 with stock halogens, I did put Led´s in, and right now the car-computer have cancelled power to the left dipped beam, and it´s still no power when I reinstalled the stock halogens. so, need to get power back to dipped beam left side , how? and how to "tell" the car that I now have Led´s ? and then reinstall the new Led´s
I got the Database from same place, paid for it - but when I connect DDT to my W453 (with the TomTom satnav system) it says no ECU found for the Nav system - I saw others on TH-cam activating Android Auto with DDT & want to do the same - but I tried both database 04/2017 & 08/2017 & no ECU ?? Thanks for any help 👍
How much time does your PC needs to scan all the ecus? i have done the whole process as it should and when i connect my pc to the car, the scanning takes almost 15 minutes and when it finishes, doesn't show me the connected ecus on the second screen. What am i doing so wrong?
My onen is relayively old. Runs windows 10 but only has 4 gb ram and a standard cpu for the age. Do you have the renault database Or just the software? Also the elm32 device was the drivers installed?
@@mvautomotive7092 I think I have the drivers installed. My pc does not gets a cd to install it. I also used a MacBook Pro with windows inside and the same. It takes many minutes to read the Ecus and then nothing. From where can I find the right drivers? I have ELM 327 usb v 1.5 with cable.
@@spirosrousounelos4523 try running the software in demo mode without connecting. It's the third option on the initial boot screen. You should then be able to click through the folders and subfolders like normal using the ecu database?
Many thanks for informative videos. I am struggling to find a safe download site for DDT2000 Database though. Many sites look like scams and ways to capture personal info. I'm happy to pay for SW or info of this nature but not happy to risk a PC crash, virus etc. Does anybody know of a safe site for the db?
Yes, I have an RS 250 and would like to code out the airbags (its now a track car) and need to turn off the airbag and spanner light on the dash, Can that be done with this software - Thanks
@@mattgower4984 as they are not renualt items I do not think the software will register them. You best option that works is to use good quality air bag resisters. You can get them for about £8 for generic ones or Recarro sell them for about £30. I know i would go for name brands. Hope that helps?
![[LIVE] : ONE ลุมพินี 91 | คู่เอก "คมอาวุธ vs อเล็กเซย์"](http://i.ytimg.com/vi/V0RkEfYFsgM/mqdefault.jpg)
Thanks for taking the time to do this. Brilliant!
If there are an specific ones you need let me know
Very useful! I'm looking forward for these tips when upgrading the auto wiper and auto headlights!
Is there a guide for a proper retrofitting of fog lights for the smart 453?
Thanks a lot and Grettings from Germany
Good evening.i have videos for both on the channel. hopefully tuesday I will be fitting foglights, so hopefully video uploaded either that night or Wednesday. 👍
th-cam.com/video/MybxA7XQtxc/w-d-xo.html Fog lights is uploaded
Mate, you are a godsend 🙏🏻 so much useful information! Thank you from the bottom of my heart! 🙏🏻🙌🏻
Hi and thanks for the video. The last update for the Database in the site you linked is "DDT2000 DATABASE UPDATE 11.2021", should I use this one or the one you linked?
@Ruicarrico you are welcome. 2021 is the newest version.
@@mvautomotive7092 thanks
Zrobiłem tak samo jak na filmiku i nie wyświetla mi się na końcu aplikacja i może być nie tak? Bardzo proszę o pomoc tutaj co można zrobić.
When you say application. Do you mean the program or the window on the application does not open. You may need to update your python settings on your computer.
@@mvautomotive7092 Chodzi właśnie program tak jak na końcu filmiku gdzie po wybraniu testera zgodnie wskazane i klikam ok, to nic się nie wyświetla. u mnie nazwa kabla obdlink sx a obecnie mam drugi nowy program ddt4all które widać że wyszukuje elm a nie ma odblink sx i co mogę zrobić>
@@mvautomotive7092 Tu pokazałeś na elm a miło byłoby pokazać na obdlink sx i nie wiem jak wgrać tego kabla obdlink do tego ddt4all bo wyszukuje cały czas elm a nie jako obdlink i jak to zamienić bądź wgrać ten odblink aby wyszukiwał podczas po ustawieniu przed uruchomieniem aplikacji.
@@mvautomotive7092 Już działa wszystko i potrzebny jeden plik które znalazłem i działa. .
Hey maybe you could help with this ddt4all i could turn on winter mode in renault laguna 3 2011 for elektric parking brake ?😊
hello, I followed all the steps you showed in this video, but I can't find my car Megane III ph2 (year 2015) in the database... do you have any idea why?
do you need a newer database?
There is a new 2020 database. If you google ddt4all 2020 database github, you should find a download available.
obd2.one/product/ddt2000-database-update-11-2021/
From the same website I used.
`How do I establish the ELM327 has the 25k80 chipset? I downloaded the D4A SW and Renault db. Offline this seems to work ok and screens seen on various info videos appear as expected. I connected to the car (Smart For4 W453) but there was little to no activity and the lower screen in D4A SW didn't populate as observed in the installation video. I checked the activity in the cmd prompt background screen and saw after every ECU code there was ''Çan Line -1' or message related to items not available. My guess is the ELM doesn't have the right chipset but have no idea how to test or establish it without breaking the unit open (prefer not to do in case I can return it!)
Outside of opening the device up to have a look it should gave stated in the device description on ordering if it has that chipset. Alot of Chinese versions say but don't actually do. The link is the description is the one I used. Price is good and it works.
Check to make sure that device drivers for the elm device are installed on your computer. There are generic packs for them online. Google elm32 driver packs.
Is it possible to connect the elm is it possible to connect to ELM 327 device to an Android tablet via OTG cable?
I have not tried it yet but there is this from gethub.
github.com/cedricp/ddt4all/wiki/Android-port
Is there any way to code a Megane 3 to "not shut down the radio when opening driver's door"? (it's anoying) ;)
There are bose hidden features and you can remove start stop. I will go through the functions and have a look.
I have electric 2018 453. I want be able to charge only to 85% but t can’t see any settings. I wonder if can change settings with DDT4ALL.
Is that charging the battery to only 85%?
There is a code for changing the charging power so that you use the full 7kw as opossed to the factory set 4.5kw?
@@mvautomotive7092
I want charge to 85%. I want automatically top charging when reach 85% of charge.
@@LAStupidDrivers this is not something that can be done through ddt4all that iam aware of. Only charging power.
Hey!, I really appreciate your videos, great!
I wonder if you can assist me?
Talisman 2019 with stock halogens, I did put Led´s in, and right now the car-computer have cancelled power to the left dipped beam, and it´s still no power when I reinstalled the stock halogens.
so, need to get power back to dipped beam left side , how?
and
how to "tell" the car that I now have Led´s ?
and then reinstall the new Led´s
Try disconnecting the battery. That tends to reset the car and may reset the warning.
will the ddt4all change the digital speedo to mph on smart fortwo 453 2017
I believe its much like the order smarts and you have to use MB Star
Thx for video
The link you give to download the database in the title it means 2017, is that the year this database was updated? Thanks
Yes at the time of producing it was the most upto date list. I believe there is a newer one but this still works for me.
I got the Database from same place, paid for it - but when I connect DDT to my W453 (with the TomTom satnav system) it says no ECU found for the Nav system - I saw others on TH-cam activating Android Auto with DDT & want to do the same - but I tried both database 04/2017 & 08/2017 & no ECU ?? Thanks for any help 👍
Are the other ecus recognised?
Please there is samething for new clio 2022? i really need disable ESP i want cry
I am almost certain that in the renault database clios were in there.
How much time does your PC needs to scan all the ecus? i have done the whole process as it should and when i connect my pc to the car, the scanning takes almost 15 minutes and when it finishes, doesn't show me the connected ecus on the second screen. What am i doing so wrong?
My onen is relayively old. Runs windows 10 but only has 4 gb ram and a standard cpu for the age. Do you have the renault database Or just the software? Also the elm32 device was the drivers installed?
@@mvautomotive7092 I think I have the drivers installed. My pc does not gets a cd to install it. I also used a MacBook Pro with windows inside and the same. It takes many minutes to read the Ecus and then nothing. From where can I find the right drivers? I have ELM 327 usb v 1.5 with cable.
@@mvautomotive7092 I also bought the Renault database 2017 and the 2020 but the same.
@@spirosrousounelos4523 try running the software in demo mode without connecting. It's the third option on the initial boot screen. You should then be able to click through the folders and subfolders like normal using the ecu database?
@@mvautomotive7092 I just checked demo edition and works fine.
Many thanks for informative videos. I am struggling to find a safe download site for DDT2000 Database though. Many sites look like scams and ways to capture personal info. I'm happy to pay for SW or info of this nature but not happy to risk a PC crash, virus etc.
Does anybody know of a safe site for the db?
The link in the description is what I used. Safe and secure.
@@mvautomotive7092 Many thanks
Can i download the ddt4all on my MacBook?
github.com/cedricp/ddt4all/issues/122
I don't know if can afford all the requiremennts and meet qualifications what is aDDT4
It's open-source software. You just need to add a database for the car and a £20 usb adaptor.
Can you show steps of downloading database to ddt
Drop me an email on c350e.project@gmail.com
does this work with renault zoe?
I believe so. I have seen posts in regards to sucessfull changing of parameters on a ze20 model.
@@mvautomotive7092 i've done it and it worked flawlessly! Thanks
@@fineryx you are welcome.
@@mvautomotive7092 also, i was wondering, maybe you know; what does the DDT in DDT4all Stand for?
@@fineryx Hi, a bit late but 'DDT' stands for "Diagnostic Data Tool" - Cheers.
Was the video usefull? Is there any coding videos you wish to see? Let me know below and I will get back to you as quickly as possible.
hi. there's no video. I don't see it. i don't understand.
now it's there. thanks. don't know what it was.
Yes, I have an RS 250 and would like to code out the airbags (its now a track car) and need to turn off the airbag and spanner light on the dash, Can that be done with this software - Thanks
@@mattgower4984 as they are not renualt items I do not think the software will register them. You best option that works is to use good quality air bag resisters. You can get them for about £8 for generic ones or Recarro sell them for about £30. I know i would go for name brands. Hope that helps?
@@mvautomotive7092 thanks for the reply, I have read that it's a 3.9 resistor, not sure the wattage, try a few and see how we go. thanks again