Your videos are very good, I just think you should show the steps in writing, because in the video you sometimes don’t understand where to upload, I would like to thank a text with all the modifications so there are no errors, thanks.
Hey Michele, all your videos about this made me want to realize lots of the thing you teach here, however I bought the OBD2 that you recommended and unfortunately I'm not able to conect the car with the pc, the ddt4all software send me an error, can you help please? Thanks in advance.
I Michele, great videos. by the way can you tell me what is the menu to activate window close when locking the car ? i have a dacia logan but should be similar to megane.
Thanks for all your videos. I have a Scenic dci 1,5, 2017 in the Bose version. It has a lane keeping assistent, which is turned off by default every time I start. Can it be turned on by default by using DDT4ALL? I can't find a way to do it.
You insert the card in it's slot, then press and hold the start button for like 10 seconds and the dash will remain on until you remove the card or press the button again.
@@aktapur543 oh, ok.. so it's for Renault with cards... i was thinking it is something for all cars including Dacia with standard key start. Thanks for answer anyway!
@@miladinseratlic5984 for cars with nomal key i think you must turn the key on the "accesories on" position (that's what long pressing the button does on renault cars with a key card)
Hello Michele, thank you for your work and hope you upload much more tutorials 🤩. Can you please tell me if this OBD interface you use has a Koleos II (2018) interface too? I will like to buy this OBD but I'm not sure it supports my car. Much appreciated!
Tengo un megane 4 1.5 dci y el mismo conector odb que en el video no hay forma de que dtt4all se entienda con la ecu cual puede ser el problema ¡ help ¡ quiero hacer el mantenimiento de las pastillas traseras y tengo freno digital mercy
Good afternoon friend can you tell me how to check or reset the mileage on the renault dashboard since the panel was with high mileage and I need the mileage like on my car
Hello Michele. I wonder if you ever changed anything in climate control. Like, if you press Auto the ventilation starts, but then in order to stop it you must go in the settings, you must click about 3-4 times to stop it. And the touch screen is not responsive some times. Is there a way you can make the Auto button, to stop it and not only start it?
hello can you send on comment the obd for adjust the km on kadjar 2017 because changer abs and i need to back the first odo value please, i will to pay from eBay or AliExpress
Hello, first of all very nice videos and great explanations. I need your professional opinion and explanation, please. So here is my problem. My Renault Espace IV 2.0 DCI 173 hp. Bj. 07.2007 had an error message in the clip DF717 PRESSURE BEFORE THE PARTICLE FILTER 1.def The sensor then came and was replaced by me, the next morning I wanted to start the diva and it was then in the display ignition lock check, okay nothing at thought this message comes more often with Renault vehicles, so key card inserted into the card reader and then came this message turn steering wheel + press start but nothing happened no matter which key card I use. So I removed the steering wheel lock and disassembled it, a lot on me that the return spring flew around in it, which should not really be, so everything cleaned and lightly greased and everything assembled, after I cleaned the engine with compressed air, the steering wheel lock made clack clack again, but the message remained in the display and the engine control unit was offline, which is So I got a used steering wheel lock from a donor vehicle, with another part number, I then installed this and you could start the engine, only it didn't run but the ignition went again, the engine control unit was active again and with start pilot the engine ran again. With my old steering wheel lock you heard the clack after connecting it and how the interior flew out of each other again, I only connect the board you hear the clack clack and you can also feel it, but the message Check ignition lock remains in the display, that tells me that the board has a problem. When it comes out of the donor vehicle, I get the message in the display card into the card compartment, card is in the card compartment but nothing happens, also the engine control unit is offline and in the clip it shows me bar lock not found. Only the ignition no longer wants to and the engine control unit is also offline again. Now I have got a steering wheel lock with the same part number that was reset. Can I connect the steering wheel lock with the same part number & it learns itself? Or can I just reset it from the donor vehicle and then it learns anew? Just how do I reset the steering wheel lock with DDT4ALL, would be great if you could help me. For information, I have all these programs. Renault Clip 158 & 178 Renault Clip Tool Renault Pin Extractor Immo Code Code APV Renolink 1.87 / 1.99 DDT4ALL Dialogys & Circuit Diagrams Espace IV Lg. Kalle
Ciao Michele, ho visto questo video e molti altri tuoi video, ho visto anche il video dove fai vedere dove i km reali dell'auto, ma purtroppo su Kadjar non fa vedere la schermata dell'odometro,manca proprio la categoria Parameter. Grazie in anticipo, saluti
Hello Michele, I sent you an email a couple of days ago! I really appreciate your work and I am a big fan of it. I started to change some stuff on my Kadjar. I have a very good idea for your next video, some of my friends played with developer mode and they pressed on the HIGH button out of curiosity and then their R-link 2 screen went black and they only can hear sound from radio without any display. I know there is a way using DDT4ALL to restore the display setting back to its default parameters so the screen will start to show again.. Hope you can do this video soon :)
hi there..i'm from algeria...thanks a lot of what are you giving...wish for you all succses... can this option work for older cars..like clio 2/clio 3/clio compus/ clio 4 1.5dci -0.9 tce- 1.2 16V/mégane 2 mégane 3?? i mean..can it work for any model car of RENAULT!!??? or just with once equipped by digital dashboard?? i mean it works with any RENAULT car equipped with OBD2?? thanks man for answering....
Hello. What do I need to do to equalize the mileage in the car's brain and the kilometers on the dial are different? I found that the previous owner lowered the mileage of the car on the dial. Can you help me? Can I perform this operation with DDT4ALL?
Ciao Michele, quando ho finito di fare questo come posso disconnettere ddt4all senza causare qualcosa a la macchina? devo prima chiudere il programma o spegnere la macchina?
⚠⚠ NEW OBD 2 INTERFACE TO USE ⚠⚠ Guys Important: USE THIS OBD 2 INTERFACE INSTEAD THAN THE ONE I MENTIONED IN VIDEOS. THEY “MODIFIED” IT AND NOW IT NO LONGER WORKS WITH DDT4ALL. USE THIS ONE, IT’S 100% OK 👉🏻 amzn.to/3UkIrdQ CHECK OUT THE FULL PLAYLIST OF DDT4ALL HACKS AND ACTIVATIONS FOR OUR RENAULT: th-cam.com/play/PL0_lM34jB4W-P_XvmnT1dxEKMvjcf8WKj.html
Hello Michele, your videos are very good, thanks. How can I change the speedo to show miles/hr instead of Kms/hr ? Renault Megane 3, year 2011, phase 1. thanks.
Not at all. Quality is very poor compared to other cars. Engine is really good and the handling too, but plastics and other materials sucks. In three years I’ve changed twice the front suspension due to a lot of noise, the steering wheel leather is gone, the leather of the seat has a lot of ripped parts.. and so on..
@@MichelePuh that is not a nice thing to hear. I mean I know a lot of people with new Megane, some are very pleased, some are not. It is a mixed bag. I think a lot depends on the year of production.
@@MicheleP it is usually like this with cars, you have to get lucky. My uncle always drove Golfs, and after a terrible experience with the last one he is not buying VW anytime soon for sure.
Liked it and very usefull....i was reading one of your comments bellow, i also changed some part at suspension in my first 20 000 km with the megane....i thought maybe i had bad luck.... However the engine is very well built....what oil do you use?
@@MicheleP I have tryed Amsoil with the right aprovals for the engine, since im a big fan for real synthetics and especially American ones....however it seems to pull a little less than Elf, think ill switch to Total or the new generation Elf (RN17 aproval)
Can I adjust my mileage using this method after cluster upgradeing in my megane IV? I found a used megane digital cluster but I'm afraid it will mess up my car. Any help is appreciated
Inner wheel is actually spinning slower than the outer wheel when turning... Also, you can't modify the km, and is clearly stating ther why. But as i've said, you don't have a clue :)
Hi Michele. I have been watching your video, and I made some changes and now I'm in bad problem. Can you please send me your email address, so I can write you in detail. I desperately need help. Thank you
![CAMPปลิ้น | รวม Highlight 2024! PART [1/2]](http://i.ytimg.com/vi/6hnvNnvYloU/mqdefault.jpg)
Your videos are very good, I just think you should show the steps in writing, because in the video you sometimes don’t understand where to upload, I would like to thank a text with all the modifications so there are no errors, thanks.
Hey Michele, all your videos about this made me want to realize lots of the thing you teach here, however I bought the OBD2 that you recommended and unfortunately I'm not able to conect the car with the pc, the ddt4all software send me an error, can you help please? Thanks in advance.
I Michele, great videos. by the way can you tell me what is the menu to activate window close when locking the car ? i have a dacia logan but should be similar to megane.
Thanks for all your videos.
I have a Scenic dci 1,5, 2017 in the Bose version. It has a lane keeping assistent, which is turned off by default every time I start. Can it be turned on by default by using DDT4ALL? I can't find a way to do it.
Please can you explain ur advice starting from 1:15 about dashboard and start/stop? I'm not sure i understand what is it about ?
You insert the card in it's slot, then press and hold the start button for like 10 seconds and the dash will remain on until you remove the card or press the button again.
@@aktapur543 oh, ok.. so it's for Renault with cards... i was thinking it is something for all cars including Dacia with standard key start. Thanks for answer anyway!
@@miladinseratlic5984 for cars with nomal key i think you must turn the key on the "accesories on" position (that's what long pressing the button does on renault cars with a key card)
Bom vídeo. No seu carro a quilometragem é real. E se estivesse alterado? apareceria de que forma?
Cant find Parametrage on Kadjar Diesel 2017/67 Plate?
After clicking ABS/ESC I have 3 options to choose from?
Hello Michele, thank you for your work and hope you upload much more tutorials 🤩. Can you please tell me if this OBD interface you use has a Koleos II (2018) interface too? I will like to buy this OBD but I'm not sure it supports my car. Much appreciated!
Yep! The car is fully supported! Buy it with confidence 💪🏻👍🏻 use the link I provided!
Hi, could you known the ecu model of my duster with ddt4all?? I would like to known if it is a sid 305 ir sid 310 siemens.
Tengo un megane 4 1.5 dci y el mismo conector odb que en el video no hay forma de que dtt4all se entienda con la ecu cual puede ser el problema ¡ help ¡ quiero hacer el mantenimiento de las pastillas traseras y tengo freno digital mercy
Good afternoon friend can you tell me how to check or reset the mileage on the renault dashboard since the panel was with high mileage and I need the mileage like on my car
hi, how to synchronize diesel gauge with the tank? i have a renault megane iv hatchback, thanks
hey my friend how to get database for Link 2 - DDT4ALL koleos
Hello Michele.
I wonder if you ever changed anything in climate control.
Like, if you press Auto the ventilation starts, but then in order to stop it you must go in the settings, you must click about 3-4 times to stop it. And the touch screen is not responsive some times. Is there a way you can make the Auto button, to stop it and not only start it?
How to do odometar reset ,because when I press the botton it didnt work?
hello can you send on comment the obd for adjust the km on kadjar 2017 because changer abs and i need to back the first odo value please, i will to pay from eBay or AliExpress
sto comprando una reno scenic serie 3 ma non trovo questa parte dove vedere i klm se sono stati cambiati mi potresti rispondere per favore.
bonjour a tous si jai bien compris on peu changer la valeur kilométrique avec ddlt4
Hi i have to Clio mk4 how can i do it steel angle sensor calibration 🙏 with dtt4all
Hi, do you know how to set the rs monitor to megane 4 2019
If the car clocked befor
And I used this programme will show the real or the clocked one?
Hi. I have Espace 5 and have a twisted mileage. I can't find a way to get it back! This video doesn't work.
Is there any version to install on Android phone?
Hello, first of all very nice videos and great explanations.
I need your professional opinion and explanation, please.
So here is my problem.
My Renault Espace IV 2.0 DCI 173 hp. Bj. 07.2007 had an error message in the clip
DF717 PRESSURE BEFORE THE PARTICLE FILTER 1.def
The sensor then came and was replaced by me, the next morning I wanted to start the diva and it was then in the display ignition lock check, okay nothing at thought this message comes more often with Renault vehicles, so key card inserted into the card reader and then came this message turn steering wheel + press start but nothing happened no matter which key card I use.
So I removed the steering wheel lock and disassembled it, a lot on me that the return spring flew around in it, which should not really be, so everything cleaned and lightly greased and everything assembled, after I cleaned the engine with compressed air, the steering wheel lock made clack clack again, but the message remained in the display and the engine control unit was offline, which is
So I got a used steering wheel lock from a donor vehicle, with another part number, I then installed this and you could start the engine, only it didn't run but the ignition went again, the engine control unit was active again and with start pilot the engine ran again.
With my old steering wheel lock you heard the clack after connecting it and how the interior flew out of each other again, I only connect the board you hear the clack clack and you can also feel it, but the message Check ignition lock remains in the display, that tells me that the board has a problem.
When it comes out of the donor vehicle, I get the message in the display card into the card compartment, card is in the card compartment but nothing happens, also the engine control unit is offline and in the clip it shows me bar lock not found.
Only the ignition no longer wants to and the engine control unit is also offline again.
Now I have got a steering wheel lock with the same part number that was reset.
Can I connect the steering wheel lock with the same part number & it learns itself?
Or can I just reset it from the donor vehicle and then it learns anew?
Just how do I reset the steering wheel lock with DDT4ALL, would be great if you could help me.
For information, I have all these programs.
Renault Clip 158 & 178
Renault Clip Tool
Renault Pin Extractor
Immo Code
Code APV
Renolink 1.87 / 1.99
DDT4ALL
Dialogys & Circuit Diagrams Espace IV
Lg. Kalle
what happens when I press reset then the km position goes to 0 or can you edit it because my km's are not the same unfortunately???
Hi ,
can i use DDT4ALL for Skoda octavia iv 2021 ?
Mmmmm. No. Obdeleven is for VAG
can I measure the km correct position when I reset it or does the position go to 0?
Hello dear friend, should the car be turned on while starting to check ?
Nope, just ignition on
Ciao Michele, ho visto questo video e molti altri tuoi video, ho visto anche il video dove fai vedere dove i km reali dell'auto, ma purtroppo su Kadjar non fa vedere la schermata dell'odometro,manca proprio la categoria Parameter.
Grazie in anticipo, saluti
Anch’io ho lo stesso problema...
per controllare i chilometri reali alla clio 4 il procedimento è lo stesso ?
Hello
Please is it works with car seat leon 2015.
another question...
is there any hidden options which i can activate with DDT4ALL in stepway ...i mean MEDIANAV CLASS and MEDIANAV EVOLUTION??
Hello Michele, I sent you an email a couple of days ago! I really appreciate your work and I am a big fan of it. I started to change some stuff on my Kadjar. I have a very good idea for your next video, some of my friends played with developer mode and they pressed on the HIGH button out of curiosity and then their R-link 2 screen went black and they only can hear sound from radio without any display. I know there is a way using DDT4ALL to restore the display setting back to its default parameters so the screen will start to show again.. Hope you can do this video soon :)
hi Ahmed! You've got mail :)
hi there..i'm from algeria...thanks a lot of what are you giving...wish for you all succses...
can this option work for older cars..like clio 2/clio 3/clio compus/ clio 4 1.5dci -0.9 tce- 1.2 16V/mégane 2 mégane 3??
i mean..can it work for any model car of RENAULT!!??? or just with once equipped by digital dashboard??
i mean it works with any RENAULT car equipped with OBD2??
thanks man for answering....
Pouvez-vous aider mon frère, je veux le panneau de brassage Clio 4 modèle 2017
How activate front sign and Light switch camera? I lost it after update maps((
Michelle do you know if Zoe ZE50 (2020) is compatible with DDT4ALL or if Renault change anything to block the software usage? regards
Unfortunately DDT4ALL is not yet allowed to read/write in the new ECUS made from 2020 :( even VW group has the same situation.
Grazie mille
Hello. What do I need to do to equalize the mileage in the car's brain and the kilometers on the dial are different? I found that the previous owner lowered the mileage of the car on the dial. Can you help me? Can I perform this operation with DDT4ALL?
My car is a 2011 renault megane 3 diesel.
I am buying a Renault is there a way to counter check the actual milage against this.
Ciao Michele, quando ho finito di fare questo come posso disconnettere ddt4all senza causare qualcosa a la macchina? devo prima chiudere il programma o spegnere la macchina?
Ciao, quando hai finito puoi chiudere il programma e poi staccare la presa obd
? Can we do this procudure on mobile?
⚠⚠ NEW OBD 2 INTERFACE TO USE ⚠⚠
Guys Important: USE THIS OBD 2 INTERFACE INSTEAD THAN THE ONE I MENTIONED IN VIDEOS. THEY “MODIFIED” IT AND NOW IT NO LONGER WORKS WITH DDT4ALL. USE THIS ONE, IT’S 100% OK 👉🏻 amzn.to/3UkIrdQ
CHECK OUT THE FULL PLAYLIST OF DDT4ALL HACKS AND ACTIVATIONS FOR OUR RENAULT: th-cam.com/play/PL0_lM34jB4W-P_XvmnT1dxEKMvjcf8WKj.html
Hi, can you confirm if this interface is a 25k80 chip? I tried a couple of them, but they don't work with DDT4ALL
How can i activat hide options in renault symbol 😍😍😍👏👏👏🤝🤝🤝
Hello Michele, your videos are very good, thanks.
How can I change the speedo to show miles/hr instead of Kms/hr ? Renault Megane 3, year 2011, phase 1. thanks.
Hola buenos días he restaurado mi rlink 2 y me ha desaparecido el icono para plegar los asientos me puedes ayudar gracias
English?
Hello good morning I have restored my rlink 2 and the icon to fold the seats has disappeared, can you help me thanks
Thank for this! how are you satisfied with your Megane?
Not at all. Quality is very poor compared to other cars. Engine is really good and the handling too, but plastics and other materials sucks. In three years I’ve changed twice the front suspension due to a lot of noise, the steering wheel leather is gone, the leather of the seat has a lot of ripped parts.. and so on..
@@MichelePuh that is not a nice thing to hear. I mean I know a lot of people with new Megane, some are very pleased, some are not. It is a mixed bag. I think a lot depends on the year of production.
yep. but i have to say that i'm upset with some stuff, but i'm very pleased with others
@@MicheleP it is usually like this with cars, you have to get lucky. My uncle always drove Golfs, and after a terrible experience with the last one he is not buying VW anytime soon for sure.
@@VladicD if you want quality you have to buy japanese cars.
Hi, can I use this software with my Megane 3? 2011 model
Yes, simply select the correct car at the beginning
Liked it and very usefull....i was reading one of your comments bellow, i also changed some part at suspension in my first 20 000 km with the megane....i thought maybe i had bad luck....
However the engine is very well built....what oil do you use?
I always used elf evolution with Renault specific, but I never bought it from the dealer, always bought on eBay with more than half than regular price
@@MicheleP I have tryed Amsoil with the right aprovals for the engine, since im a big fan for real synthetics and especially American ones....however it seems to pull a little less than Elf, think ill switch to Total or the new generation Elf (RN17 aproval)
So you Know how i can enabled the Car distance Warnung? I have the newest scenic.
Pleace make an video
Hi, actually to enable that you must have the front radar, otherwise you won’t have any distance displayed!
@@MicheleP i have 😉
ok, so you should activate it in the r-link ADAS menu
Hola, con este programa se pueden corregir kilómetros
Hi Michele
Thanks for your tutoriels.. Very nice.
How about optimizing Renault Megane EDC gearbox.? My gearbox is very slow (44.000 km)
Cheers
Claus
Hello can u show how to active alarme for megane 4
For activating the alarm you need to have the hardware installed.
@@MicheleP me i haive the hardware but i dont know howe
really thank you from Egypt
Hi Mohamamed! Glad you appreciate it!
Can I adjust my mileage using this method after cluster upgradeing in my megane IV? I found a used megane digital cluster but I'm afraid it will mess up my car. Any help is appreciated
How to enable WIFI at a clio V?
you can't at the moment. ECUs on new cars are locked
Inner wheel is actually spinning slower than the outer wheel when turning... Also, you can't modify the km, and is clearly stating ther why. But as i've said, you don't have a clue :)
Sarei contento se fai i video in italiano, grazie
Hi Michele. I have been watching your video, and I made some changes and now I'm in bad problem. Can you please send me your email address, so I can write you in detail. I desperately need help. Thank you
what happens when I press reset then the km position goes to 0 or can you edit it because my km's are not the same unfortunately???
if you press reset yoi will erase the data
@@MicheleP so when I press reset my km goes to 0?
Also want to know this, if someone presses this does it go only to zero or can you change the KM....