Man, 1 of the main reasons I haven't bought a boat (I live just a few miles from a public lake) is I had no idea how to retrieve a capsized boat without modifying another boat, like the tug boat. Thanks for this great video!
good evening, great achievement and efficient that this model👍👍,, I would like to know the reference of the propeller as well as the power of the engine in KV, thank you and very nice work.
Thanks for vid. Quick question Jayme: I'm trying to use old airplane parts. Do I need to get a pusher prop or can I get my electric motor to spin in reverse? Thanks!
@@jaymeparker27 ok, i was asking because I was trying to repurpose my airplane gear. Master stuff is chinsy and my other props are balanced. I'm going to experiment with normal prop flip over and spun in reverse
Ahh gotcha. I've never had a issue pushing back any boat. Even my 40 inch boat around 12 pounds loaded. Has plenty of power. I only utilize 25-30% of what it can put out.
RDS3218 20KG 270 Degree U Mount RC Digital Servo - Waterproof Robot Motor Arm Servo - High Torque Full Metal Gear Servo with U Mounting Bracket for RC Robotic Arm Model DIY Baja Car 1/10 Scale Crawler a.co/d/8e8QNfW
Nice, I have a question for ya, How well does it do when the Boat is sunken in a Vertical Position, with the Pontoons/Bow sticking straight up in the water ???? ALSO,,, Basically, how Tall is it from the Water surface, to the Center of the Propeller?
Nice rig Jay, please tell me basically how long are your PONTOONS, and how WIDE is your opening between the Pontoons. I have a 40" ZONDA... and I don't swim anymore. Thanks Jay
Thank you. The pontoons are 33" long and it's 16" inside from foam to foam. The pvc frame is about 18" wide but the pool noodle takes up some of that width.
ATA HOBBY DUMBORC X4 2.4GHz 4-Channel RC Radio Transmitter and Receiver X6F with Fail-Safe & Low Voltage Alarm Function Mixed Mode for Rc Vehicle Car Boat Tank Model Parts Remote Controller a.co/d/0TOKbXf
Know way I'd leave all them lipos just sitting on a shelf like that i keep all mine in old metal army amo boxes them lips safe bag's are also c**p thay just slow it down a bit but the flames do get through within minutes so basically pointless things.
Man, 1 of the main reasons I haven't bought a boat (I live just a few miles from a public lake) is I had no idea how to retrieve a capsized boat without modifying another boat, like the tug boat. Thanks for this great video!
You are welcome. I hope it helps.
good evening, great achievement and efficient that this model👍👍,, I would like to know the reference of the propeller as well as the power of the engine in KV, thank you and very nice work.
Amazon , 12 " master air screw prop and 1100 kv motor
@@jaymeparker27
Tank's👍
Thanks for vid. Quick question Jayme: I'm trying to use old airplane parts. Do I need to get a pusher prop or can I get my electric motor to spin in reverse? Thanks!
@Raven_of_Doom you can swap rotation on the brushless motor/esc .
@@jaymeparker27 quick f/u question: did you use a pusher prop? or standard (tractor) prop with motor in reverse?
@@Raven_of_Doom found on Amazon. Master Airscrew Performance 11x4.5 Multi-Rotor Series Propellers - Black, 2 pcs a.co/d/j2WPM4fMaster air screw
@@jaymeparker27 ok, i was asking because I was trying to repurpose my airplane gear. Master stuff is chinsy and my other props are balanced. I'm going to experiment with normal prop flip over and spun in reverse
@Raven_of_Doom let me know how it works out for you.
Nice setup! I have recently built something very similar and just love it!
Thank you. It's definitely a must have for me
Did you test the thrust power here?
Not quite sure what you are asking?
@@jaymeparker27 In other words what weight can it bring max..
Ahh gotcha. I've never had a issue pushing back any boat. Even my 40 inch boat around 12 pounds loaded. Has plenty of power. I only utilize 25-30% of what it can put out.
Thank you for making the video!
You are welcome, thank you for the comment
Thank you man that's a nice setup
You are welcome and I appreciate it.
Hi Jay, I'm having trouble finding that uctronics servo motor. Do you have a link for that? Or an equivalent you would recommend?
RDS3218 20KG 270 Degree U Mount RC Digital Servo - Waterproof Robot Motor Arm Servo - High Torque Full Metal Gear Servo with U Mounting Bracket for RC Robotic Arm Model DIY Baja Car 1/10 Scale Crawler a.co/d/8e8QNfW
Hope this helps. Thanks
@@jaymeparker27 I just saw this - six months later. Sitting in my spam folder. Thank you.
@@CDxDave you are welcome
Nice, I have a question for ya, How well does it do when the Boat is sunken in a Vertical Position, with the Pontoons/Bow sticking straight up in the water ???? ALSO,,, Basically, how Tall is it from the Water surface, to the Center of the Propeller?
I've haven't had to recover a boat in that position yet. It's 10 1/2 inches from center of prop to pontoons
Hey, cool project, i'm 100% doing it! Ordered everything electronic from aliexpress, but what diameter pvc pipe did you use? Thanks!
It's 1/2 pvc
Nice rig Jay, please tell me basically how long are your PONTOONS, and how WIDE is your opening between the Pontoons. I have a 40" ZONDA... and I don't swim anymore. Thanks Jay
Thank you. The pontoons are 33" long and it's 16" inside from foam to foam. The pvc frame is about 18" wide but the pool noodle takes up some of that width.
@@jaymeparker27 That's about what I have cut..., Now I can finish her up. REALLY APPRECIATE IT !
You are welcome
Can you send me the link for that ESC and Dumbo radio receiver setup?
ATA HOBBY DUMBORC X4 2.4GHz 4-Channel RC Radio Transmitter and Receiver X6F with Fail-Safe & Low Voltage Alarm Function Mixed Mode for Rc Vehicle Car Boat Tank Model Parts Remote Controller a.co/d/0TOKbXf
Where can I get that ESC and transmitter?
Everything came from Amazon. There is pictures of parts used in video.
Very nice
Thank you
Know way I'd leave all them lipos just sitting on a shelf like that i keep all mine in old metal army amo boxes them lips safe bag's are also c**p thay just slow it down a bit but the flames do get through within minutes so basically pointless things.
Thank you for the comment
I got a new one in the works too
Nice! I built this one about a year ago. It's definitely a time saver.