If you're considering purchasing an EV, DroneQuote's EV calculator is great because it will help you understand: • how much power your driving will require • how much $ you'll save vs. your ICE vehicle • and how many solar panels you would need to cover your driving" EV: www.dronequote.net/evcalc/?a=electricsupercar
Everything is In a layered design. More may need to be removed than initially anticipated. Found a quote like that in an Audi manual. I am pretty sure Porche is the same.
Dude! What a huge effort! I'm glad you reinstalled the dash etc. That was starting to look like a nightmare if you left it for a few months. I'm very keen to see how you do the actual conversion. Especially CANBUS etc. Well done.
Very glad I found this channel. Love the way you do your work, very organized. I couldn't do any of this myself, so I live my "car mechanic" life vicariously through you. lol Keep up the amazing work!
Good heavens! I am awed at how you persevere at this disassembly process. Me? I would be cursing the bureaucracy that mandated all the rubbish that goes into a modern car. I would think...mistakenly, I'm sure...all these unboltings and unscrewings as the "paperwork" in a modern vehicle. To watch you throw out all these "office files" into (hopefully...) the "Recycle Bin" is satisfying. I hope YOU enjoyed it as much as I did!
Super glad I was directed to your channel via JerryRig! Love your videos and how much time goes into them. They make a very satisfying watch and you have the patience of a saint! Keep it up!
I've never seen a car with so many components! (I haven't seen that one being disassembled to begin with, but it starts to make sense why these are so expensive) Hope you remember where all the cross braces went. It looks like not just the weight distribution plays a big part in Porsche's iconic driveability, but also the structural stiffness that some components or their mounting brackets were adding. The engineering on these cars is amazing.
@@ElectricSuperCar 😄 I might forget it, I'm not organised like you are and would probably get anxiety just thinking about taking on a project like this.
Congratulations on reaching this milestone!. Quite an effort. I laughed at the bolt in the fan you had to remove. Love that German engineering mind! Excited to see your rebuild/conversion work. It'll be am meistens ausgezeichnet!
Hi Jeremy, I just found your chanel this weekend and binged almost every episode, ( dont think the wides too happy). I've subbed and am really looking forward to the Cayman build. Keep up the good work and the entertaining videos.👍👍
Body panels are usually abs. You can chemically weld abs by using acetone. It gets as strong as new since the bond is just abs. Its a lot cleaner and simpler.
@@ElectricSuperCar if you need abs putty you can just mix abs scraps and acetone in a jar and mix it. Once you spread it on the part the acetone wil evaporate and you are left with just abs.
Astounding all the time, blood, sweat, tears (?) going into the teardown. Looking forward to the "build" portion of this project. Thanks for showing us your work!
Thanks for the Porsche teardown video. It will be exciting to see the new CF panels that you build for a custom look of the Porsche GT -E. I am also looking forward to seeing your wrap up video for your first EV supercar. It came out great, and it will be enjoyable to see all of those many years of blood, sweat and tears, elbow smashing, fiberglass patching, and head scratching, required to create that great car. All rolled into a tight, summary video.
I think the supports you removed from your stage 2 teardown vid were actually structural, cuz I remember them talking about it on Mat Armstong's vid when porsche were inspecting his cayman s. Sorry for forgetting to comment it on you vid before.
I really can’t even comprehend being able to keep all of the screws and bolts and where they go set aside in a way that would allow me to put it back together. I replaced the screen in my phone once on my iPhone 4s and I stressed hard about where the screws came from and that was like 20 max.
@@ElectricSuperCar awesome, thanks for sharing this. I'm loving the more frequent video uploads. 👍🏻 I still have you finishing this before the actual ev cayman from Porsche hits the road sometime in 2025. 😎
Did you do any internet searches to help with the tear down or just use your engineering experience to figure out how to peel back the layers? Do you have a service manual to help? One of the hardest parts of the tear down is taking pictures and bagging small parts for each assembly. Then making notes for the various sizes of fasteners and what location they were removed.
awesome video, as always! cheers from 🇧🇷. One question, when reassembling I didn't saw you putting the dash panel back (velocimeter, bc, etc.), just a frame, are you planning to use a different one? I love the Porsche dash design, I think it would be crazy if somehow you manage to make it work (tho you won't have rpm...)
Hi, sorry if I missed it, but are you planning on having a trunk or a frunk from the space you got by removing all the combustion related parts? I'm curious to see where you get this car up to. Thank you for sharing!
Keep up the great work, can't wait for more videos. I wish I could afford an EV right now, it's just the initial cost. It's a shame because I'm paying a lot for my SUV (Subaru Ascent $685/mo), that's similar to the price of an EV. The problem is, the only 6-7 seater I'm interested in is the Model X. That's almost a 6 figure EV base price. I'm not against used, but the prices don't really move. I'm interested in EV conversions. I'm really hoping that a market get's created that has full setups and a centralized computer to allow a more OE feel. Again, keep up the great work.
Really cool that you list the tools for the episode. I have a question about that. Do you like the lift that you have or would you prefer one with legs. I will be in the market soon and can't decide which I would prefer. The one you have looks easiest to use.
Both have their advantages. The 2 post gives a lot more access especially around the wheels. The 4 post is better if you also plan to "store" or temporarily store a car. Also I have never seen a car fall off of a 4 post...can't say the same about a 2 post
@@ElectricSuperCar Thanks for the reply, I really appreciate it. This is an extremely cool project. Good logic on the two post. I have seen a car fall off of one.
I know it's real easy hindsight being 20/20 for me to complain after the fact. But that's steering wheel was in your way for half that work in the interior. Yet you still left it on only removing it towards the end saving you a bunch of trouble
No need for the clutch pedal, and I'm guessing that the steering column was out for the Front Drive unit install.. though there was no real need for that. Steering wheel removal would definitely make the removal of that brake booster clip much easier! (it's the notorious type used on all modern VWs) Rack is already electric, so no need for any electric steering conversion.
Man brotha you need to get a Milwaukee for those stubborn subframe mounts. Speaking from personal experience , I don't know why but the Milwaukee impact is just better than DeWalt
You're at 41 hours on the board. Does that include everything from when you got it in the garage and on the lift? It is very tiring, yet satisfying to see your progress, I imagine it is the same for you. Thank you for sharing all of this with the world! Did you guys get another dog as yet - I know that's a "ruff" thing with history, but there are new experiences to be had....
Maybe you've thought about this before but why not stream your work on twitch too? Might as well since you're filming anyway. We would love to watch you struggle live.
@@ElectricSuperCar At least you'll have some more interaction and who knows someone might have some advice of certain bolts while you're struggling. Personally I prefer if they didn't say anything though 😉
I enjoy your videos very much. However, that insanely repetitious 'background music' is extremely annoying. We are here to watch and listen to your work. We don't need any other fill.
If you're considering purchasing an EV, DroneQuote's EV calculator is great because it will help you understand:
• how much power your driving will require
• how much $ you'll save vs. your ICE vehicle
• and how many solar panels you would need to cover your driving"
EV: www.dronequote.net/evcalc/?a=electricsupercar
Woot woot! Thank you, Sir!
The disassembly makes you appreciate the incredible amount of engineering that went into packaging this thing in the first place!
Yes it does!
Everything is In a layered design. More may need to be removed than initially anticipated. Found a quote like that in an Audi manual. I am pretty sure Porche is the same.
@@sys-administrator same with most manual cars. They do it because it’s cheaper
So amazing to see how you one person figured out and dissembled the entire car!
Thanks for the comment!
dude you are just such a good hearted, likeable person! Keep up the incredible work! Greetings from Austria and Gob Bless you!
Wow, thank you!
Glad you were able to recover all that gas. That almost covers the cost of the entire car. :D
😂
Dude! What a huge effort! I'm glad you reinstalled the dash etc. That was starting to look like a nightmare if you left it for a few months. I'm very keen to see how you do the actual conversion. Especially CANBUS etc. Well done.
Thanks! 👍
Another great episode. Can't wait for the three-year journey in 15 minutes for the first build.
Thanks!
Porche: "let's make the most convoluted vehicle to service"
Also Porche: "Just use velcro. It'll be fine"
🤣
Very glad I found this channel. Love the way you do your work, very organized. I couldn't do any of this myself, so I live my "car mechanic" life vicariously through you. lol Keep up the amazing work!
Awesome! Thank you!
I also think you’re the most organized car modded ever. Labeling is always a good idea yet no one actually does it, except you 😊
Very true!
wow, that's a lot of effort. Good job, loving the effort you're putting in
Thanks a lot!
Good heavens! I am awed at how you persevere at this disassembly process. Me? I would be cursing the bureaucracy that mandated all the rubbish that goes into a modern car. I would think...mistakenly, I'm sure...all these unboltings and unscrewings as the "paperwork" in a modern vehicle. To watch you throw out all these "office files" into (hopefully...) the "Recycle Bin" is satisfying. I hope YOU enjoyed it as much as I did!
LOL! 🤣
Watching complex machines and cars is very satisfying. Really appreciate the effort 👍
Glad you liked it
Break down complete then?!? Woo! Congrats on the hard work. Now the fun stuff begins, right?
Yes it does!
Got to say that this is something that now, has just BLOWN MY MIND!!!! YOU HAVE EARNED MY RESPECT 🎉🎉🎉👍👍👍👍👍😎
Thanks Friend!
Super glad I was directed to your channel via JerryRig! Love your videos and how much time goes into them. They make a very satisfying watch and you have the patience of a saint! Keep it up!
Glad you like them!
Your "twin" helping you out, I just love the way you often incorporate that into your videos, I like it a lot!
Cheers
👍💪✌
Thanks 👍
Already looks much better cleaned! A lot of stuff in not a lot of space. Imagine having tondesign that from scratch...
I've never seen a car with so many components! (I haven't seen that one being disassembled to begin with, but it starts to make sense why these are so expensive)
Hope you remember where all the cross braces went. It looks like not just the weight distribution plays a big part in Porsche's iconic driveability, but also the structural stiffness that some components or their mounting brackets were adding. The engineering on these cars is amazing.
I am asking you to remind me!
@@ElectricSuperCar 😄 I might forget it, I'm not organised like you are and would probably get anxiety just thinking about taking on a project like this.
Hey @dewalt, can we get this fine gentleman a battery operated 1/4in Ratchet! Keep up the good work sir.
Yes, absolutely
Dang that dis-assembly is kinda crazy, very interested to see you putting it all back together along with your adjustments.
More to come!
I want to know how he organized it all so he can put it back together.
could you do a quick update in your next video how you catalog all the parts as you take them out.
Can you not get access to a Factory Service Manual? That would tell you exactly how to disassemble everything with as few detours as possible.
Would be easier...but where is the fun and I wouldn't have as much to swear about 🤪
Congratulations on reaching this milestone!. Quite an effort. I laughed at the bolt in the fan you had to remove. Love that German engineering mind! Excited to see your rebuild/conversion work. It'll be am meistens ausgezeichnet!
Thanks 👍
You just brightened my evening after a LONG day at work. Thank You!
You are so welcome! I feel you
Loving the videos, and you have a fortune in parts to sell !
Loving it! Let me know if you need help with the carbon fiber. My entire body was encapsulated (3D prints) in CF, through infusion. I learned a ton.
Deal!
@@ElectricSuperCar Excellent!
so much work, good job !
Thanks a lot!
Absolutely love just sipping my coffee and watching these. 🔥🔥🔥
Thanks Friend!
Another fascinating and enlightening video, Jeremy, thanks! So smart of you to re-assemble the components you won’t get to for awhile.
Glad you enjoyed it!
You are the only one I know who pronounce Porsche correctly (As it is pronounced in german which sounds more like : "Porschae")
Nice!
Honestly knowing myself I would have cut the petrol tank in half.
I was so close to doing just that!
Shared brake and clutch fluid makes little sense and is not normal... so don't feel bad about not expecting that!
At least I am not alone
Awesome content. So much fun seeing the progression
Thanks man!
Some cars have a separate reservoir for the clutch, some don't. Most usually use a common reservoir
Interesting 🤔
Hi Jeremy, I just found your chanel this weekend and binged almost every episode, ( dont think the wides too happy). I've subbed and am really looking forward to the Cayman build. Keep up the good work and the entertaining videos.👍👍
Welcome aboard!
I want to apologize to you for doubting you will be able to put all of that back together so nicely. 😢
But seriously. Awesome work.
Thank you so much 😀
I was going to ask about labeling, since you didn't show much in later videos, good to have a reminder of how much work goes into it!
Great point!
Body panels are usually abs. You can chemically weld abs by using acetone. It gets as strong as new since the bond is just abs. Its a lot cleaner and simpler.
Great tip!
@@ElectricSuperCar if you need abs putty you can just mix abs scraps and acetone in a jar and mix it. Once you spread it on the part the acetone wil evaporate and you are left with just abs.
Astounding all the time, blood, sweat, tears (?) going into the teardown. Looking forward to the "build" portion of this project. Thanks for showing us your work!
Thanks for the comment!
Thanks for the Porsche teardown video. It will be exciting to see the new CF panels that you build for a custom look of the Porsche GT -E. I am also looking forward to seeing your wrap up video for your first EV supercar. It came out great, and it will be enjoyable to see all of those many years of blood, sweat and tears, elbow smashing, fiberglass patching, and head scratching, required to create that great car. All rolled into a tight, summary video.
Thanks Friend!
If you need any custom parts designed to put it all back together then I would be very interested in helping out
Nice!
Can't wait to see what is the electronic layout planing for the car very interested in were are the electronic parts going to be in.
Coming soon!
Get the factory service manual. It'll save you so much time. A Haynes manual won't hurt either, but factory is better.
Thanks for the suggestion!
I think the supports you removed from your stage 2 teardown vid were actually structural, cuz I remember them talking about it on Mat Armstong's vid when porsche were inspecting his cayman s. Sorry for forgetting to comment it on you vid before.
Thanks for the comment!
I really can’t even comprehend being able to keep all of the screws and bolts and where they go set aside in a way that would allow me to put it back together. I replaced the screen in my phone once on my iPhone 4s and I stressed hard about where the screws came from and that was like 20 max.
🤣
1705# fully stripped down is my guess. 3,350# once you are done making into an awd gt-e rocket. 👍🏻😎
Those are going to be pretty accurate!
@@ElectricSuperCar awesome, thanks for sharing this. I'm loving the more frequent video uploads. 👍🏻
I still have you finishing this before the actual ev cayman from Porsche hits the road sometime in 2025. 😎
Did you do any internet searches to help with the tear down or just use your engineering experience to figure out how to peel back the layers? Do you have a service manual to help? One of the hardest parts of the tear down is taking pictures and bagging small parts for each assembly. Then making notes for the various sizes of fasteners and what location they were removed.
Another TH-cam channel
youtube.com/@jeffrichardson7677
They have several videos of a teardown
end weight stripped, I guess 1840 lbs.
Great progress on this project. But you need to lose the watch while working on ICE vehicles!
Yes, you are right
You may get sued by Embracer Group for the copyright infringement in the video thumbnail.
Thanks for sharing! Keep it up, mate
Thanks, will do!
I think recording the entire disassembly makes it much easier to figure out you to put it all back together 😂
You got it!
Another good video! What method do you use to keep organized while disassembling and reassembling?
Go crazy and make them GT4 RS exterieur version ;-) Also nice job for teardown everything.
Nice!
Velcro is even NASA approved since they invented it for their Apollo spacesuits.
Nice!
awesome video, as always! cheers from 🇧🇷. One question, when reassembling I didn't saw you putting the dash panel back (velocimeter, bc, etc.), just a frame, are you planning to use a different one? I love the Porsche dash design, I think it would be crazy if somehow you manage to make it work (tho you won't have rpm...)
I will likely need to use something different as the CAN messages sent from the motor will not be there any more
I wish you just leave the stick shifter in place, it might be so fan to play if it is like real shifter.
Only a couple broken clips a few drops of blood and 12 hours is insanely impressive
👍
Hi, sorry if I missed it, but are you planning on having a trunk or a frunk from the space you got by removing all the combustion related parts?
I'm curious to see where you get this car up to. Thank you for sharing!
Car currently has a frunk as it is a mid-engine car. I will try and keep something of a frunk if I can
Love the build and channel! I’m interested in buying some of your parts for my 2017 Cayman, are you selling anything?
Yep. Started listing some things on ebay. Send me an email with what you are interested in. Electricsupercar@gmail.com
great videoo as always
Thanks again!
Keep up the great work, can't wait for more videos. I wish I could afford an EV right now, it's just the initial cost. It's a shame because I'm paying a lot for my SUV (Subaru Ascent $685/mo), that's similar to the price of an EV. The problem is, the only 6-7 seater I'm interested in is the Model X. That's almost a 6 figure EV base price. I'm not against used, but the prices don't really move. I'm interested in EV conversions. I'm really hoping that a market get's created that has full setups and a centralized computer to allow a more OE feel. Again, keep up the great work.
👍
Really cool that you list the tools for the episode. I have a question about that. Do you like the lift that you have or would you prefer one with legs. I will be in the market soon and can't decide which I would prefer. The one you have looks easiest to use.
Both have their advantages. The 2 post gives a lot more access especially around the wheels. The 4 post is better if you also plan to "store" or temporarily store a car. Also I have never seen a car fall off of a 4 post...can't say the same about a 2 post
@@ElectricSuperCar Thanks for the reply, I really appreciate it. This is an extremely cool project. Good logic on the two post. I have seen a car fall off of one.
Not hard to understand why a car is considered a total loss when the airbags deploy. Rebuilding the interior costs a fortune!
Mmm i think a modern Steering wheel would look a lot better on this one, but still nice vid and thank u for ur hard work :D
Yeah I agree
What's your plan for the airbags? Can the ACU run without any input from other modules? Or just put them in for show?😅
I will try to make the system operational
@@ElectricSuperCar that's very cool, I can't wait to see that episode. What about the infotainment system and gauge cluster?
I know it's real easy hindsight being 20/20 for me to complain after the fact. But that's steering wheel was in your way for half that work in the interior. Yet you still left it on only removing it towards the end saving you a bunch of trouble
That and the seats. Hindsight is 20/20
Converting over to electric power ? I’m trying to understand why such a disassembly of the dash. To get rid of unnecessary wires?
Yeah I couldn't figure that out either.
No need for the clutch pedal, and I'm guessing that the steering column was out for the Front Drive unit install.. though there was no real need for that.
Steering wheel removal would definitely make the removal of that brake booster clip much easier! (it's the notorious type used on all modern VWs)
Rack is already electric, so no need for any electric steering conversion.
To drop the subframe, I had to take out the steering column. Also to get out the brake booster, I had to take out the brake pedal
@@ElectricSuperCar yes I watched the whole video
Man brotha you need to get a Milwaukee for those stubborn subframe mounts. Speaking from personal experience , I don't know why but the Milwaukee impact is just better than DeWalt
Good to know!
You're at 41 hours on the board. Does that include everything from when you got it in the garage and on the lift? It is very tiring, yet satisfying to see your progress, I imagine it is the same for you. Thank you for sharing all of this with the world! Did you guys get another dog as yet - I know that's a "ruff" thing with history, but there are new experiences to be had....
We really want another dog. Not sure on the timing
Have no idea how you are going to put all of those parts back together 😮
U may have a few bolts leftover 😮
you should probably change the thumbnail photo because of copyr
See you next time 👍
👍
nice video but why you say "porsche e " ?
What year and model 911 are you working.
2014 981-Cayman
Do you plan to reuse all original features ? I mean air bag , entertainment , abs , all original electronic system?
Btw i like your work , its clean
That's the plan!
@@ElectricSuperCar this is nice. I think it's the next step for ev conversion.
Maybe you've thought about this before but why not stream your work on twitch too? Might as well since you're filming anyway. We would love to watch you struggle live.
LOL! I probably should
@@ElectricSuperCar At least you'll have some more interaction and who knows someone might have some advice of certain bolts while you're struggling. Personally I prefer if they didn't say anything though 😉
I'm guessing you'll lose 50% of the weight.
Very close!
I so wish my dad did this stuff let alone with me. Completely sick
👍
Came for the hummer stayed for the porchá
Thanks!
@@ElectricSuperCar keep the great work, your videos are really chill
Strange that you were doing some plastic welding and a totally different channel dropped down on my screen talking about how to do plastic welding.
They have some good tips?
No one is ever going to take off a gas tank 😂
Are you able to sell the parts you don’t need or is it not Worth the effort?
I will try
Damn ur a 1 man brabus
LOL!
How the hell do you what is what after you unscrewed hundreds of bolts and pieces?
Calculated guessing
Is it me or you've upped your camera game? ;)
*gear, meant gear (camera game definitely upped lol!)
Thanks Friend!
❤
👍
I'm guessing 1013kg 😊
Now, with all those grease smudges....do you feel like a regular grease monkey?
Yes sir!
💪 *promosm*
I enjoy your videos very much. However, that insanely repetitious 'background music' is extremely annoying. We are here to watch and listen to your work. We don't need any other fill.
Noted!
man, porsche does not make it easy to work on their cars huh?
You're right!
👍
👍🏎⚡
👍