How to pick Master Lock 5400D Combination Realtor Lock Box with out combination
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- 💯Read the Comments! This Master Pick Works! 🏆
PLEASE SUBSCRIBE!!! Push me over 10,000 Subs!
Forgotten or lost combination? NO PROBLEM
How to open combination lox box without knowing the code.
How to open Master Lock Realtor Lock Box with a Coke can
I think Airbnb uses these too.
Abus keyholders too!
Skip to:
2:15 To make a shim
5:40 For the Pick
8:40 To see what is happening inside the lock
Master Lock 5400D
amzn.to/3D2IlkW
Another Pick Video
• (642) Master Lock Comb...
#LockSport #MasterLock #RealtorLockBox
![[631] Master Lock 875/975 Decoded WITHOUT ANY TOOLS !](/img/n.gif)
*"If you find this helpful, Please consider clicking on the "THANK$" Button"* 👍🏼
hmm i got it to 3 digits but none of the 4th will move it testet it multiple times and needed to use 5 chims becouse my lock has some dots on its site on the weel that i think should brek these kinda stuff whitout unlocking dont now got the abus 878 grey box steel whit black dustcover
Edit i was writing bevore i was doing that 3 times switch at the end welp i was live doing it thats why i paused evertime thx its open
Took me just a few minutes and it works! If there's anything I would add to the instructions is when the shim is on the right number, you can easily move it up and down. When it's on a wrong number, the shim resists. Thanks!
Wish I could watch the rest of this tutorial, I sliced my hand all the way to the bone making the Shim. Going to the hospital now.
😂😂😂
that reminds me. I have to lay out some ribs tomorrow to thaw. Love falling off the bone ribs.
considered that possibility ahead of time and preempted the cutting off of my finger with duct tape wrapped around the shim.!
Should have used scissors like he said
Oh, is it sharp? Would never have guessed. Thanks for the heads up.
OMG this absolutely worked. It takes a few tries to get the feel of tension change. I did 2 lock boxes and everyone in the office was shocked how easy it was. Thanks for the helpful tips
Any chance you can film what you did?
Extremely good tutorial, very easy to follow and do myself. You saved me $25 and taught me a life skill.
Thanks! This really helped! Got the lock open in no time. Took longer to make the shim. It also helps to apply slight downward pressure on the shin once you have it inserted into the lock, because once you hit the right number you will feel an obvious release in pressure!
Great tip!
rookie tip.
Perfect! This totally worked. Have a Master Lock lock box on the wall of my house from a previous owner and wanted to use it ourselves. I found that two consecutive numbers made the shim loose, but the trick of going one back to see the shim move showed it was the second number. So appreciative man. Thanks.
THANKYOU!!!! I've watched 5 different videos. And this is the only one which worked!!! Thank you very much. Mine I only had to scroll up 2 more clicks. Not 3. So to all those out there still struggling. Scroll the wheel up one digit at a time untill you go full circle.
Cheers @uncle Fjester!
Cheers! Good tip! once you get all the wheels flat spot set, move them together one click at a time.
Mine was actually 4 more moves down, but this helped a lot. I bought a new home and the realtor left it on my door.
@@UncleFjester l. L
Play the right side ml
Yea I saw another video that said to try 1 number at a time and it worked
This video is amazing!! My realtor left the lock box on my door and it’s been months since I moved in so I’m taking it off myself lol
but here’s a tip for those that have add, adhd or even just can’t focus easily through the whole video , turn the playback speed to 1.25 or 1.75 and it’s much easier to listen to and get through. I loved this video but for me personally, I cant focus when people talk with long pauses between their words lol so that helped a lot
Glad it helped, good tip!
Great Video!!! After being told by a local and reputable locksmith company they don't open these they break them off. I was inspired by your and made one of your quality tools. For me positioning the shim at the top of the wheel and down at a 45% angle with scrolling the wheel up was more reliable.
Awesome took me about 5 minutes! I thought I got it in a minute my first attempt, but that would have been to easy. Thanks for the video! The other one I saw didn’t give a deep enough explanation, your in-depth explanation really helped solidify how to get it to work
Hey Uncle Fjester....I'm a retired Realtor had a combo box hanging on my wall for years I forgot the combo your little trick worked perfectly to find the combo. I must have cut my shim just the right way the shim that I made only went in so far until the right number came up then the shim went in further so I knew that was the right spot. Dropped the numbers down one number at a time until the lock opened...the final combo I would have never guessed in a million years...so thanks to you and TH-cam this combo box can be used again...many thanks.
Amazing tutorial - I’ve watched loads but you’re the one who helped me break into my own key safe! Many thanks for taking the time to give exact details.
Totally worked for me. Once I had my shim, I was able to unlock it within 2-3 minutes. Thank you so so much!!!
I tried every single other video tutorial and yours is the only one that I got to work! Thank you so much for the tutorial. Your instructions are so precise and you can really see and notice that changes like you showed in the video 👍👍👍👍👍
Thanks Fishin, this made my day.
You're the best, thank you! I was able to get the spare keys out of my mountain retreat before someone else did. Contractors left it up there then claimed it wasn't theirs. SO glad you helped! Liked, subscribed, commented, shared...everything. Thank you SO much!
I watched 3 other videos and yours was the only 1 that worked. I'm a new home builder and my subs think it's funny to change codes. Now I'm ready for them
Thank you. Helped immensely. The number that came up was not right on mine, so since I knew they were all aligned, I moved the whole dial one rotation at a time until it opened. Yay. Thanks!
You're an absolute genius, Uncle Fjester. Thanks!
Just used your trick on one I locked by accident and didn't know the combo. Worked like a charm. Thanks!
Most excellent! I'm homeless and there are A LOT of vacant businesses in my area. I see these boxes all over the place. Now I'll have a roof over my head.
Thanks! Took a minute or two to get the feel, then Voila!! Really appreciate it!
You are too kind! Thank you very much. I’m glad it helped.
Oh my god!! it worked!! I did it and scrolled up 3 more clicks and it opened. Thanks very much. Amazing! Today is July 18, 2021.
I watched a few videos before I found yours. None of them worked until I tried your way!
Amazing!!
Thank you so much!!
It didn't work for me at first because I only watched half of the video, missed that +3. Finally, worked for me when I finished the video. Thanks!
I don’t feel so bad, now that I no I’m not alone. Lol
You are a GEM! It's very helpful. You even taught us how to make the shim. I was wondering how I could get the shim while watching other’s videos.
Brilliant ! Worked for me . I had it opened before i had time to drink the coke I had poured in a cup so I could make the shim tool !!!
Thanks a ton! Like many others, I tried a few videos until I found this one. The soda can trick worked like a charm.
A note to others attempting this, the tip of the shim has to be cut fairly thin, otherwise it can get caught in the mechanisms and give you false positives. Once you figure out how to wedge it in properly, the rest is pretty easy.
Thanks , worked like a charm, ive had this lock hanging around since 2014 , subscribed
Thank you so much for this ! You saved me from bruteforcing thousands of combination, I don't know how to tell you how grateful I am
😎
Tried this technique on an old lockbox left behind by a contractor I've had for YEARS. Including the time it took to make the shim, I had the lock open in about 10 minutes. It was a little scary how easy it was to open this thing, though. Thanks again!
Patrick Putlock Made my shim from a empty Guinness can half hour following your instructions i opened the lock your the top man,
I don't drink alcohol: I made it from a Coke can ;-)
Just spent 30 mins unable to open my lock cause I didn't finish the video to the part where you add 3. Thankfully, adding 3 worked, thanks so much.
It worked. Fabulous. I tried first with different type of material to do the shimmy but it they didn't hold up. I then found a can and followed your instructions to the a new shimmy. It took me 10 minutes to get it opened. Had to do it twice to be sure. I added 3 numbers and wallah! It opened. And just happed the combination I did not remember it. Thank you for so clear illustrations. ❤ I almost removed the knob. 😅
😎
I can’t believe I did it!! After I got all the numbers to move the shim that wasn’t it. I moved them all up by 1 until it opened I think it was 2 above the original numbers
This instruction was great. Got it open in 15 min.
This is awesome I accidentally scrambled my combination on reset and locked the door then I didn't know what the code was I tried some of the other methods I saw same Idea but with a thin piece of plastic but couldn't figure it out but I got it with this one. Thank you
You are Welcome, Nice bike
Fantastic, just saved me some money, since neither the new or old code seemed to work on my box. Thanks a lot!!!
This totally worked for me. Thank you. I felt so accomplished once I popped it open.
My business partner passed away a few days before Christmas. About 2 years ago while we were drinking some how the conversation surfaced about this lockbox he forgot the code to many years ago. For years he tried to open it and couldn't. He said he will never throw it away because someone will figure it out. Well thanks to you this box that has been locked for almost 10 years maybe more has been finally opened.
@Elsie Arafeh-Hudson just some screws to mount it to the wall. It would have been awesome to find some long lost keys
THANK YOU SIR! Worked as described, down to turn all numbers 3 times downward after using a shim to locate number placement. We found this lockbox attached to our backdoor when we moved in, thanks again.
Live Long and Prosper 🖖🏼
Very helpful! Bought an RV previous owner lost combination. This worked perfectly.
Dude, ur awesome & I’m too ignorant & impatient. Didn’t watch all vid, so didn’t LEARN about the +3 til I was about to take a torch & just end it all.....for the lock. Next time I’ll watch ALL the lesson. Lol
Take care & thx again for the tutorial
Thank you! Forgot the combo and you just helped me get it! Mine was the wall mount type, but the face and the lock are identical.
unreal...first I tried with a Arizona Tea can, but the material was likely to soft. So, I cut a piece of plastic from the original Master Lock packaging, and ba boom. It worked the first time. Thanks so much!
Your system worked perfectly - saved a whole load of time going through each number - although I did start that way.
You are a life saver! Well done, this helped me a lot! Greetings from Germany.
Danke furs zuschauen
Another satisfied viewer, this explanation was perfect on how to get one of these open. I was able to get the lock box the realtor left on my house that's been sitting there for a year. XD Liked and subscribed!
Nice tutorial watch till end. Definitely have to move the tumblers 3 more times.
Very very help full, with a little patient and paying attention I just opened two lock boxes that I had lost the code!!!! Thanks Uncle Fjester
Thank you for the information/ training. I work a lot within property management industry and having this knowledge definitely helped with a lock box that a client jacked up. They tried to change it to their own code.
Thanks again.
thank you so much there was another tutorial using the same method but you gave way more deatail as to the angle the shim is supposed to as well as how deep to expect it to drop i finally got my lock open with this thanks so much again
Works as advertised , took a few tries but got it open. Amazing!
The shim. 🙇♂️🙌 All the other pro videos have fancy tools. This! Thank you ‼️
Lite Beer Cans work too!🤣
Worked perfectly!! ThNks for the help!
Worked perfectly first time around. Thank you!
Worked for me! Thanks 🤩
I just wanted to say thank you very much. I bought a home that had a ML spare key box mounted on the wall and I've lived here for 3 years wondering what was in there. With your tutorial and explanations, I used the same pick you have and made the shim with a soda can and got it in 2 minutes flat. Thank you so much.
That's Fast! What was in there?
@@UncleFjester Funny enough, there were 2 sets of spare keys to locks that the former owners had already changed out by the time I bought the place. Looks like they forgot their combination and decided to just leave the old keys in there. 😂 Now I can finally access the screws and remove that thing from the wall since it can be picked with a soda can lol
Bought a house in August and no one knew the code to get the lock box off of my front gate. One beer, a pair of scissors, and 5 minutes - I got the thing off without having to saw it or call a professional. Excellent tutorial 👍👍
Congratulations on the new house ❗❗
OMG! I watched a few videos, and this one got it open. Thanks!
I feel like a badass!!! I just cracked the code to my lockbox for the Airbnb I run. Someone changed it and I couldn't get in it by thanks to you I was able to get in! Thank you sooooo much!
Thanks so much! After figuring out to make the shim narrow enough and work it clear down inside, I got 4 numbers that didn’t open it, but taking more of your advice I moved each number up 3 digits and to my complete surprise, voila it popped open!
All l can say is MAY THE ALMIGHTY GOD BLESS YOU 🙏🏾🙏🏾🙏🏾 You honestly have no idea how much you have helped me. I've been stood on my door watching and trying all TH-cam videos for a good 5 hours just so l could get my spare house key 😭😭😭omg
Awesome video. Thank you sir!
Hey man, tks for your knowledge. I only have a issue... which is the measurement of the instrument because I cant open it... even I don’t really sure in what point make “click” tks in advance
Nice trick it worked for me in 10 minutes with a ABUS keyholder box that i did not know the cobination of! Thanks.
This is an amazing video! It actually works and took me 5 minutes after making the simple shim from dr pepper can! Thanks Uncle Fjester ... saved me $40 lockbox cost! I called lock company and they said there is no way to get into these.
Thanks
big thanks, I'd watched 3 or 4 videos before this one but was left not really sure what I was looking for in terms of feedback. The keys inside had spares so it was never a big issue, but now I can actually use this dang thing again instead of having to buy another one.
Just picked my first lock!! Thank you this will be my new hobby since guns ammo cost to much!
get you an eBike
HOLY CANOLI! IT WORKED! Thank you so much for posting! I watched the video . Took me less than five minutes after the shim was done. Don’t forget to add 3 everyone!
Took a big chance and used fruit juice can instead of a Coke can. Still worked!
I thought Juice only came in Boxes 🤷🏻♂️
That’s what was so scary about using one... so many unknowns 😜
Bingo. Have a handful of these things over the years and now got em all dialed in again w a number I'll remember. Thanks!
Thanks for doing this video! It worked like a champ. It only took me 10 or 15 minutes to get the feel for it and Shazam it opened.
Glad it helped!
10:15 is the most important step.
After determining the location of the flat spot with the shim, +3 to each number.
It's easy to miss if you're impatient like me.
how many tried this without watching it and was like this doesn't work! thanks for posting adding 3
Yeah. Couse in another videos but with same model they say +1 dig will be enough. But in the end worked +3
or play it safe and up each dial one digit at a time.
@@ЭрнестРаппапорт the + 1 actually worked for me maybe its different with each lock or it could be i went +1 from the point where mt shim went up where he went back down 1 then added 3 or maybe i just got lucky who knows
I tried your method and it worked. I used a piece of film first. It didn't work. I eventually bought a soda and use the can to make a shim and it finaly worked. Thanks
Great job!
You are honestly a boss!! I've been trying for weeks using other videos. Watched this and figured out my combo within 15 minutes. Seriously, thank you for being so thorough in your video!
So grateful for this detailed explanation. On to taking the lockbox off our door which Orkin left 2 months ago after tenting our home and hasnt removed. Im sick of waiting for them.
I'd say you got a free Lock Box, but I'm sure you paid a lot for it. If Orkin ever ask about it tell them you destroyed it on removal.
@@UncleFjester Agree!!
noticed it was a very subtle change in the feel of the keys ( more than I was expecting)… I made the same tool you showed but with an old piece of measuring tape…took me a while but it works!…
Thank you for showing the details for unlocking the box.👏🏽👏🏻👏🏽👏👏🏿
Glad it helped!
I watched about 10 videos before I got to yours and u finally helped me open my own lock. I am truly grateful for u❤❤ thank u kind stranger 😊
Glad I could help
Found an old one of these in my trailer. Forgot the combo. This 100% worked! Thx
BOOM, I got it on the first try - THANK YOU for sharing!
Excellent!
Saved me $35 bucks...Thank you
Thank you. I just used your tutorial and with a little perseverance I now have my keys back. The only difference I used an ice tea can. Take care.
Iced Tea Can? Haiyaa 🤦♂️
Wow! Thanks a lot! Took me less than 10 minutes after watching. Excellent video!
Great tutorial, worked like a charm in a few minutes. Thanks!
thnx you so much its worked for me it toke me about 20 minutes to do it but worked thnx you so much
I feel like ZZ TOP just taught me how to open my MASTER LOCK MODEL 5400D KEYSAFE that has been unused for almost 10 years in my drawer upstairs. Their song "TUSH" just became "TOUCH" as in picking a lock. The paper wheel added a great visual. I did something like that when showing my wife what removing a 4 links in my Spidel watchband looked like with the staples it uses on the flat springs.
I been bad, I been good
Dallas, Texas, Hollywood
This actually worked!! And it was with 3 moves thank you!!
You're a genius!!! It worked so I don't have to pry it off!!
Uncle Fjester thank you so much for this video you helped me a lot
Thank you so much!!! It took me about an hour but it worked!!
Thanks for this! Finally got that stupid lockbox opened on my house. Original owners put a lockbox on the door frame, people I bought it from didn't know the combo. This worked like a charm. Took me longer to drink the soda and make the tool than it did to open it up. Though mine was the style that bolts to a wall, not a padlock style, locking mechanism is obviously the same. Real combo was exactly three higher than where the wheels line up. Was thinking of changing the combo, and actually using it-- but given how easy it is to defeat, maybe a hidden fake rock is better.
Make sure to watch the entire video, l paused the video before he told you to ad 3 numbers to get the correct code. Thanks for making the video, saved two locks from ending up in the trash.
Keep up the great videos.
Awesome!
This is the best tip of them all. Basically, you stick the jimmy down until it stops. Then tapping it lightly toward the bottom of the lock (not the back) on every turn. When your stick tilts toward the bottom of the lock (toward the Master Lock words), that's your set number. Do that for the other three and follow Uncle Fjester's instruction. Thank you.
Any tip that helps get this open! ThankQ
Alrighty, took me 30 minutes... however finally got it open. There was an abandoned LB at my office and got it open!
*Tip: for me.. i didn't realize you do need to keep a slight pressure on your "shim" like he mentioned and when it wiggles... that's the spot. Neato
I just got my open. It’s unbelievable 😊
You are amazing!!! I tried a couple other tutorials and yours actually worked! Thank you so much!
Great to hear!
Thanks, had one when I was a Realtor. Just found it again and of course did not remember combo. It took me longer to make the tool, out of a beer can, than to pick the lock.
You have learned well, grasshopper...
Lol. Same experience except I made my key from an old box cutter casing
Worked perfectly. Thanks for the Coke can idea.
Beer can works like a charm...😎 But I held the shim till I felt the resistance give instead of waitin 4 the shim 2 stop vibrating on every turn of the dial.
Coke Cans don't Vibrate...JK
Boom-shaka-laka! Thanks for saving me $60 on having to replace 2 of these units!
👍🏻👍🏻