How to Start a 2 Stroke Gas RC Car - Rovan RC

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 พ.ย. 2024

ความคิดเห็น • 41

  • @tjpolo
    @tjpolo 3 ปีที่แล้ว +7

    Probably the best clearly explained video with the visuals of setting end points that's out right now after all these years.....thank you for this.

  • @modularrc6428
    @modularrc6428 3 ปีที่แล้ว +4

    Good info for setting up RC’s. Thanks for taking the time to do this video.

  • @Joe_V_
    @Joe_V_ 3 ปีที่แล้ว +4

    Great job Dan and the Rovan RC team!

  • @donaldmosby6931
    @donaldmosby6931 3 หลายเดือนก่อน

    Just pulled the trigger on my first 5b buggy. This is by far the best beginner video avaliable for newbies like myself. Thank you.

  • @Jesuswinsbirdofmichigan
    @Jesuswinsbirdofmichigan 2 ปีที่แล้ว +1

    Thank you Dr. Radio.

  • @Rhoedision
    @Rhoedision 3 ปีที่แล้ว +2

    Cheers Dan..Great info..and most definitely helpful..👊

  • @samarahmad8622
    @samarahmad8622 2 ปีที่แล้ว

    I have a reely cf 3 and this really helped thanks

  • @Ryan-gf3jf
    @Ryan-gf3jf 3 ปีที่แล้ว +1

    Awesome tutorial!

  • @tonymanna9160
    @tonymanna9160 3 ปีที่แล้ว +1

    Good info! I love my Baja.

  • @fsauvage9281
    @fsauvage9281 3 ปีที่แล้ว +1

    Very good. Thanks

  • @lilbitrc7017
    @lilbitrc7017 2 ปีที่แล้ว

    Can you make a video of the high speed gear installation?

  • @simonshoot5
    @simonshoot5 ปีที่แล้ว

    Great video thank you, was wondering if you tell me the low and high for a 29cc 😊

    • @fearlessrcstore
      @fearlessrcstore ปีที่แล้ว

      It's 1-1/4 out for the low and 1-1/2 out for the high.

  • @bobgeldoff9413
    @bobgeldoff9413 6 หลายเดือนก่อน

    also do you know anything about the traxxas 3.3 nitro engines? mine did start upstairs but when i got it ground level it just refused to start and stay started.just cuts off.i think its haunted

  • @beanrtx
    @beanrtx ปีที่แล้ว

    I have a question I buyed a rovan baja and it works fine the ABS is off and when I rev it. IT won't move not sure why

  • @InTheDogHouse3DPrinting
    @InTheDogHouse3DPrinting 8 หลายเดือนก่อน

    May I ask where you got that pipe from? I have a Baja, and I like the looks of it.

    • @rovanrc6030
      @rovanrc6030  5 หลายเดือนก่อน +1

      You can order it on our main website here fearlessrc.com/product/RVDZ03-002/ Thanks

    • @InTheDogHouse3DPrinting
      @InTheDogHouse3DPrinting 5 หลายเดือนก่อน

      @@rovanrc6030 Perfect, thank you for replying back to me.

  • @thelag1200
    @thelag1200 2 ปีที่แล้ว +1

    do these come pre tuned from the factory? do I need to adjust anything?

    • @PrimalRC
      @PrimalRC 2 ปีที่แล้ว +1

      There usually close to tuned but different locations will need different tuning.

    • @thelag1200
      @thelag1200 2 ปีที่แล้ว

      so they should be fine to use out of the box they will only be little rich or lean

    • @PrimalRC
      @PrimalRC 2 ปีที่แล้ว

      @@thelag1200 Yes.

  • @bobgeldoff9413
    @bobgeldoff9413 6 หลายเดือนก่อน

    also are these engines the same as the nitro engines? what about maitenence and adjusting for hot weather and cold starts and humidity etc are they a pain like the nitro engines?

    • @rovanrc6030
      @rovanrc6030  5 หลายเดือนก่อน

      No, these engines are like a weed wacker, they hold there tune, very easy to operate.

  • @bobgeldoff9413
    @bobgeldoff9413 6 หลายเดือนก่อน

    is it any good though.i see this and its the cheaper end.also can you add bigger wheels to it.the hex nut hubs look quite big.

    • @rovanrc6030
      @rovanrc6030  5 หลายเดือนก่อน

      These Rovan or King Motor Baja's are the best value in gas 1/5 scale. There fast, durable and parts are affordable compered to other brands.

  • @rippintheirlipstv201
    @rippintheirlipstv201 ปีที่แล้ว

    I need help I can’t start my redcatdunrunner!

  • @beanrtx
    @beanrtx ปีที่แล้ว

    When I put it into reverse the receiver shaking not sure why and it don't brake and tips

    • @kingmotorrc9694
      @kingmotorrc9694 ปีที่แล้ว +1

      Do you mean the brake servo is shaking? If so you probably have the ABS system on the radio, try shutting that off.

    • @beanrtx
      @beanrtx ปีที่แล้ว

      @@kingmotorrc9694 thank you for the reply its sorted now thxs

  • @alfiehomer2581
    @alfiehomer2581 ปีที่แล้ว

    How do i make my rovan as1 baja brakes sharper

    • @OwenBuckingham11
      @OwenBuckingham11 ปีที่แล้ว

      try adjusting the end point on your remote to pull the brakes harder, or adjust the linkage so it pulls the brakes sooner. Also check there is no oil on the brakes, sometimes a leaky exhaust on the Baja can leak oil onto the brakes (tighten the exhaust screws or get a new exhaust gasket to prevent the leak). Hope this helps!

    • @alfiehomer2581
      @alfiehomer2581 ปีที่แล้ว

      @@OwenBuckingham11 thank you. It has helped. As its my first one. Its running on 25 to 1 raito starts first time with no adjustment on anything so its running on factory settings it that ok. Don't cut out should i leave it

  • @phuque2ho
    @phuque2ho 3 ปีที่แล้ว

    only prob.. you posted this too late. lol
    i need a helacoil job now.. & see if thst holds.. i bought 2 dif dually adaptors
    neither right thread size.. i got the 2yr waiting list LT SC 4wd.. red/white.. i need a helacoil job cuz factory plug first time i flooded it.. it stripped sadly.. but that's ok.. only thing i broke in a year lol but i love it.. now not to cartwheel it.. when get dually working.. & i got 170x60 (x4) & 170x80 for fronts off buggy.. to compensate torque difference

    • @phuque2ho
      @phuque2ho 3 ปีที่แล้ว

      wish i wasn't poor & disabled.. $$ probs cuz guilty not want to pay still nor use facts in courts.. lol i got facts.. the courts are guilty when they ignore their own rules..
      can't sue a commonwealth but gov guilty too.. & tell me get a lawyer & need another doctor.. um.. malpractices on both.. so how? & why? i have FACTS.. lol

    • @thelag1200
      @thelag1200 2 ปีที่แล้ว

      do these Baja's come pre tuned from the factory? do I need to do any tuning?

    • @phuque2ho
      @phuque2ho 2 ปีที่แล้ว

      @@thelag1200 yes.. tuned but as you learn them.. & mass productions.. & shipping.. you mostly have to tune suspension & alignments.. better than kit form.. not really.. you learn more putting them together.. cuz you must maintain them.. like real cars

    • @thelag1200
      @thelag1200 2 ปีที่แล้ว

      @@phuque2ho so the carb settings are fine. I only have problems with tuning as my previous nitro car did not respond to tuning at all otherwise I can maintain a car. So just to confirm before I buy one of these they come pre tuned

    • @phuque2ho
      @phuque2ho 2 ปีที่แล้ว

      @@thelag1200 oh.. nitro.. i'm running 5th scale 2stroke rovan 450lt shourt course turning into a semi-trail & rally 😀 😄 truck.. chainsaw yet loud as a 125 cc dirtbike

  • @Harvz78
    @Harvz78 8 หลายเดือนก่อน

    Looks like your hand going get grilled every time reaching the choke.

    • @PrimalRC
      @PrimalRC 8 หลายเดือนก่อน +1

      Not really since you only use the choke when the engine is cold.