oh thank god i found this video, i've been doing it wrong the whole time, they said i short two leads out and when it's hard to turn the stepper that's a pair, but the LED idea was the one that was able to get me out of trouble thanks bro
mate thank you so much. i have been struggling with that issue for many many weeks - you cannot imagine how much i had to watch & how much i had to read - haha - and then you fix this in 4 minutes "facepalm"
Yess !! Thank you very much for this trick. After spending an full night mounting the machine, i had two days of pulling the hair figuring out why the hell one of the z axis stepper wouldn't follow the other ! Edit : now still have to find out why the Y stepper do not stop at the limit switch and goes BRRRRRR..! until I move it a little by hand. Maybe the switch contact is not good enough
Great Video! My 3d Printer have this problem on an x-axis , but it does not permanently stop working, But Have such noise during printing for a few seconds randomly, and whole print are ruined because the axis shifted... I have tried many solutions like tightening the gear, calibrating the axis, and those won't work. it make me crazy and Finally I look for this solution! I am now going to order a new cable for a trial!! THX for the video
But in the ramps 1.4 configuration, it says in the order b2, a2, a1, b1 and you have connected a2, a1, b2, b1. It would possibly damage the motor and the driver.
Hello, I have a problem with my grbl CNC plotter when I run the X axis on the CNC, the y axis run and if the y axis run, then the y axis still run.mean x axis is not working in both conditions
Hi i own a guider 2s which is having a problem with extruder stepper. when feeding filament it is vibrating but not rotating to push the filament in. Please help me out with this problem.
I checked the driver connections first by switching the x and y axis connectors. Both drivers worked because the y worked in both. However, the x axis still shudders in either driver. Is my conclusion that the x axis stepper motor is the fault or is it its cable?? Hope this is clearly explained.
Nice video sir, can you help me to run my stepper 28byj 48? I'm trying to make a CNC drawing machine but I want to test the stepper before making the CNC, so problem is that when I'm uploading stepper examples from Arduino Software so the stepper vibrating only and rotating very less steps some time and it is rotating perfectly only when I'm giving it some easy force with my fingers, what is the problem? Is it requires more power or is it mechanical problem? Or any other?, Thanks in advance.
hello friend ...you used computer power supply to power up this your owen 3D print,then i want to know ,is it enough current for 3D printer and how much current is 3D printer wanted
i am facing the same problem had tried all the solutions changing wire, code or pins drivers but the motor is still giving a beep and the strange thing is it is showing continuity in all four pairs led blew 1,2 -1,3 -1,4 and so on for all. I had tried running motor directly with arduino and it is running but facing issue while it is connected to CNC shield with A4988 driver. I am using Arduino uno and motor are 4 pinned. Could you please tell me what I am doing wrong?
what would you say if the motors don't move at all. the power supply is on. I just have the x and y connected and not getting any movment. pots arn't making noise.
Potentiometer maybe set too low- there is hardly any current flowing. Check the voltage on the A4988 or any driver and see that it meets the motor specs. ( In my case , feeding too low a current had this problem - i had to raise the voltage (i.e 1volts )
Türk arkadaşlar için şöyle açıklayayım, motorlarınıza komut yolladığınız halde ileri geri hareket etmiyorsa, titreşim hareketi yapıyorsa bu videodaki gibi kabloların yerlerini değiştirebilirsiniz. kesin çözüm.
Omg tks so much Ive stuck with this whole day
great video I've been looking for this solution for 5 days. thanks. subscribing!!
Outstanding! Thanks! Been fighting this issue for several days now. Never occurred to me to check the phasing of the motors.
oh thank god i found this video, i've been doing it wrong the whole time, they said i short two leads out and when it's hard to turn the stepper that's a pair, but the LED idea was the one that was able to get me out of trouble thanks bro
PS i also subscribed
Awesome man! Going to try to do this when I get home. Motors been making that horrible noise for days and I couldn't figure it out.
Had the exact same problem. Very useful. Thanks!
mate thank you so much. i have been struggling with that issue for many many weeks - you cannot imagine how much i had to watch & how much i had to read - haha - and then you fix this in 4 minutes "facepalm"
Great Video, thanks for the information.
Thank you. I Had this issue for a while.
Thanks buddy, it was really helpful for me
this helped me so much, thanks!
Very helpful
Yess !! Thank you very much for this trick. After spending an full night mounting the machine, i had two days of pulling the hair figuring out why the hell one of the z axis stepper wouldn't follow the other !
Edit : now still have to find out why the Y stepper do not stop at the limit switch and goes BRRRRRR..! until I move it a little by hand. Maybe the switch contact is not good enough
Having that same issue
Great Video!
My 3d Printer have this problem on an x-axis , but it does not permanently stop working, But Have such noise during printing for a few seconds randomly, and whole print are ruined because the axis shifted... I have tried many solutions like tightening the gear, calibrating the axis, and those won't work. it make me crazy and Finally I look for this solution! I am now going to order a new cable for a trial!! THX for the video
Summer HA what was the solution for your problem? I an having this exact issue on my CRS-10
What if the wires are already correct ?
Would you have any other ideas on why this exact problem is happening but its not the wires? I would really love an idea.
Thank you bro
Great video just want to mention to use a flat screwdriver to unpin that plug is more appropriate.
I love you I lose almost 3 days tuning my new 3d pri Ter board
But in the ramps 1.4 configuration, it says in the order b2, a2, a1, b1 and you have connected a2, a1, b2, b1. It would possibly damage the motor and the driver.
My Ender 3 Xaxis ran for a minute then started skipping, buzzing, etc. The motor wiring pairs will light the LED. Does that point to the driver chip?
Thank you!! A friend and i build a 3d printer and had the same problem..
PS: Know we also know how a stepper motor works :D
Hello, I have a problem with my grbl CNC plotter when I run the X axis on the CNC, the y axis run and if the y axis run, then the y axis still run.mean x axis is not working in both conditions
Software endstop problem and possibly the cabling is twisted but often its the software endstop inflicting with print size
thanks a lot!!
Hi i own a guider 2s which is having a problem with extruder stepper. when feeding filament it is vibrating but not rotating to push the filament in. Please help me out with this problem.
I checked the driver connections first by switching the x and y axis connectors. Both drivers worked because the y worked in both. However, the x axis still shudders in either driver. Is my conclusion that the x axis stepper motor is the fault or is it its cable?? Hope this is clearly explained.
you're a god
i found out problem with my printer
the printer is crashing into x axis as sometimes the x motor moves right instead of going left pls help
This kid sounds like he is 15. There is hope for the future.
??????
help me ramps 1.6 plus x Y working good and z e0 e1 not responding anything I tried all cables changed board changed but still not working what to do
Nice video sir, can you help me to run my stepper 28byj 48? I'm trying to make a CNC drawing machine but I want to test the stepper before making the CNC, so problem is that when I'm uploading stepper examples from Arduino Software so the stepper vibrating only and rotating very less steps some time and it is rotating perfectly only when I'm giving it some easy force with my fingers, what is the problem? Is it requires more power or is it mechanical problem? Or any other?, Thanks in advance.
thank you thank you thank you thankyou
hello friend ...you used computer power supply to power up this your owen 3D print,then i want to know ,is it enough current for 3D printer and how much current is 3D printer wanted
Hello there ,what if the motors dont move at all... please help ,ive done everithing properly and still notings moving... please help!
Thanks
i am facing the same problem had tried all the solutions changing wire, code or pins drivers but the motor is still giving a beep and the strange thing is it is showing continuity in all four pairs led blew 1,2 -1,3 -1,4 and so on for all. I had tried running motor directly with arduino and it is running but facing issue while it is connected to CNC shield with A4988 driver.
I am using Arduino uno and motor are 4 pinned. Could you please tell me what I am doing wrong?
what would you say if the motors don't move at all. the power supply is on. I just have the x and y connected and not getting any movment. pots arn't making noise.
Potentiometer maybe set too low- there is hardly any current flowing. Check the voltage on the A4988 or any driver and see that it meets the motor specs. ( In my case , feeding too low a current had this problem - i had to raise the voltage (i.e 1volts )
Even same problem to me
thanks man. you just save my ass.
Thanks bro 1 question why is my stepper motor getting very hot
My grinding motor had a bad cable.
How to fix a stepper motor: Check your wiring.
For me its not the wiring...
any idea ?
Have you got solution??
This is how to fix stepper motor wiring not...fixing the stepper motor.
Türk arkadaşlar için şöyle açıklayayım, motorlarınıza komut yolladığınız halde ileri geri hareket etmiyorsa, titreşim hareketi yapıyorsa bu videodaki gibi kabloların yerlerini değiştirebilirsiniz. kesin çözüm.