I have done the same, different wheels and tyres different bike. Because of disc brakes I can have 26", 27.5" and 700c wheel sets and each makes the bike very different. Thank you for sharing.
I understand your point. With being able to use three different wheel sizes. You have three different bikes in one That my friend is in my opinion an all round bike a quiver killer
I cut and grinded the H brace on the chain stay for bigger tires. The H brace are usually used for rim brakes which i will never ever use. If you buy a frame for disc brake only, you wont see those H brace im talking about.
Hi bro Im currently riding MTB 26x 2.125 (57-559) and would like to convert it to hybrid. How to go about it? Can I change the tyre only? What the road cycle tyre size I suppose to choose? Pls advise, thank u
@@learning_mm It's a complicated. First, you have to measure the current tire radius from the axis of the wheel, and if you can fit 700C wheels, you have to choose the 700C tire size. You have to calculate all these sizes yourself. This is the frame, the rear wheel. You have to calculate the fork, the front wheel as well. It's like Lego, you know, you can't put parts that don't fit together. Calculate all the circumstances.
I had the same mechanical double action calipers... they sucks! I replaced it with hybrid mechanical-hidraulic calipers just yesterday after a year of daily pads regulation on the old ones.
@@pedrobarros4837 Levers for mechanical calipers single piston (the original ones). The original ones had less braking power but not a problem of regulation. The double mechanical pinston ones (like the ones in the video) had more braking power but they loose regulation every day...The problem wasn't in the levers but in the little exagonal screws into the double piston calipers that push the pads that can't be blocked. Now, the hybrid mechanical-hydraulic ones seem to have even more power and no problems at all. Same levers remain.
@@sergiosegura4655 My mechanical hydraulic brakes are good for a city bike. Probably there are top quality ones tjat are good for sport, (also pure mechanical calipers )
I think you should be using oil on the freewheel- for instance chainsaw oil or Phil Woods Tenacious oil. Definitely not grease. Also, the bolts that hold the sprockets together are not meant to keep the sprockets tight on the hub. The locking ring is what holds the sprockets to the correct tightness. The little bolts are only to hold the sprockets together when they are off the bike.
Chainsaw oil? Really? I'm not being a smart ass, I'm actually really curious. It's something I have in the shed and all my bikes need to be stripped down for a cleaning and care while on the trainer atm.
If the rider is tall enough, such as over 6 feet height, the S 15.5 or M 17 size MTB frame has nearly the same Stack and Reach as the new ML or L size gravel frame. And retail version KMC chain is much more expensive than shimano, I dont' know why that.
If the 26 wheels and other moving parts u have are still good a cheap option would be 26x1.75 tyres with touring/gravel profile and a narrow handlebar with bar-ends.. I cycled with that for years in the 90s and 00s
Ficou muito bonita. Se estivesse no seu lugar, tentaria manter uma coroa tripla em vez da única. Outrossim, colocaria freios de ferradura para reduzir o peso total, mas haja vista o propósito de pedalar por caminhos de cascalho e terra, os freios a disco são realmente mais profíquos. Qual foi o valor despendido nestas melhorias? Abraços do Brasil 🇧🇷
After about 3 years the last Keurig stopped working th-cam.com/users/postUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf initially was able to unblock, however eventually we couldn't fix. That one was a replacement unit sent by the manufacturer after we had problems with our very first Keurig. This works fine (lol, at least for now) however I didn't realize the water reservoir was so much smaller than our prior unit. With 2 people having one or two cups of coffee each morning, it seems like I'm refilling it daily. Otherwise just happy to have the convenience of pod coffee vs. making a morning pot.
Мне одному интересно как цепь увеличилась или нет? Просто так как он ее примерял, она вообже переключатель вывернуть должна в прямом углу к перу)))))))))))))))))))))))
Hi, What's the axle-to-crown length? Is there a big difference changing from 26" suspension? I have a rigid fork for a 700c wheel which id like to put on my 26" frame but measured it and calculated I'd lose about 4.4cm because it's not suspension adjusted.
@@davidramos9883 The size of the tire is important. If the tire gets bigger, it won't put on the frame. You need to change the fork to one with no suspension. Don’t put on to 700c wheels in 26” fork.
I have done the same, different wheels and tyres different bike. Because of disc brakes I can have 26", 27.5" and 700c wheel sets and each makes the bike very different. Thank you for sharing.
That’s right, what you say. Thanks
I understand your point. With being able to use three different wheel sizes. You have three different bikes in one That my friend is in my opinion an all round bike a quiver killer
Hace 3 años yo convertí una de aro 26 cuadro de los 80´ en gravel aro 700x40. Relaciones 1x10 lo deje en 10 kilos y va ok.
Saludos desde Perú.
Hola amigo, una consulta, estoy buscando información sobre si ¿se puede colar ruedas de 700C en una bici aro 26”?
@@rennyreateguirios claro que si, de donde eres tal vez podemos ponernos en contacto
Le pusiste horquilla para 700c o le dejaste la de 26'?
@@ellbambinopatron al misma horquilla de 26.
Me podrias ayudar con mi proyecto? Tengo una bicicleta rodada 26
I cut and grinded the H brace on the chain stay for bigger tires. The H brace are usually used for rim brakes which i will never ever use. If you buy a frame for disc brake only, you wont see those H brace im talking about.
Many thanks for your video. which brake calipers do you use?
@@Gcatalanaladren Thank U! I used ZOOM disc brake from Aliexpress.
Hi bro Im currently riding MTB 26x 2.125 (57-559) and would like to convert it to hybrid. How to go about it? Can I change the tyre only? What the road cycle tyre size I suppose to choose? Pls advise, thank u
@@learning_mm It's a complicated. First, you have to measure the current tire radius from the axis of the wheel, and if you can fit 700C wheels, you have to choose the 700C tire size. You have to calculate all these sizes yourself. This is the frame, the rear wheel. You have to calculate the fork, the front wheel as well. It's like Lego, you know, you can't put parts that don't fit together. Calculate all the circumstances.
tjakep tenan masbro... ta tiru ah...
Очень понравилось ❤
Beautiful 😘 nice conversion 🤘🤙
Thanks.
Zoom dB неподходят для дуалов, ездил на них, 100кг очень тяжело оттормозится с горки
Planned to do the same, i've an old 26" bike with 3by...
Try to use ltwoo gr9 1by
Try it and show me when it’s done. Good luck.
how much in total did the parts cost in this rebuild and can you share parts list ?
how much did you pa for the parts alltogether?
I had the same mechanical double action calipers... they sucks! I replaced it with hybrid mechanical-hidraulic calipers just yesterday after a year of daily pads regulation on the old ones.
What type of brake levers have you used before replacing them?
@@pedrobarros4837 Levers for mechanical calipers single piston (the original ones). The original ones had less braking power but not a problem of regulation. The double mechanical pinston ones (like the ones in the video) had more braking power but they loose regulation every day...The problem wasn't in the levers but in the little exagonal screws into the double piston calipers that push the pads that can't be blocked. Now, the hybrid mechanical-hydraulic ones seem to have even more power and no problems at all. Same levers remain.
Thank you. I'll take that into consideration.
How's it been your experience with those brakes? I've been thinking about using them on a gravel project
@@sergiosegura4655 My mechanical hydraulic brakes are good for a city bike. Probably there are top quality ones tjat are good for sport, (also pure mechanical calipers )
치닝디핑을 정비대로 쓴다.... 하나 배워갑니다.
그냥저냥 쓸만해요.
I think you should be using oil on the freewheel- for instance chainsaw oil or Phil Woods Tenacious oil. Definitely not grease. Also, the bolts that hold the sprockets together are not meant to keep the sprockets tight on the hub. The locking ring is what holds the sprockets to the correct tightness. The little bolts are only to hold the sprockets together when they are off the bike.
Thank You for comments. Sprockets refer to video th-cam.com/video/IWFy3M9kwW0/w-d-xo.html.
Chainsaw oil? Really? I'm not being a smart ass, I'm actually really curious. It's something I have in the shed and all my bikes need to be stripped down for a cleaning and care while on the trainer atm.
I Have an old LESPO Stinger Ace.
Any recommendations for on a budget upgrades??😅😅😅
I changed everything except for the bike frame, seatpost, saddle.
Great build, I'd like to do the same! Did the 29 inch wheels make your bottom bracket more elevated?
Ang gaganda na ng bike
Thanks
If the rider is tall enough, such as over 6 feet height, the S 15.5 or M 17 size MTB frame has nearly the same Stack and Reach as the new ML or L size gravel frame.
And retail version KMC chain is much more expensive than shimano, I dont' know why that.
After your transformation, How many cm from the center axle crank to the ground? I like your bike.
Thank You! Distance 320mm Between crank to the ground.
질문입니다. 26인치 트렉 3500를 그래블화 시키고 싶은데요 700c가 들어가는지 여부를 어떻게 확인할수 있을까요?
그냥 단순히 끼워봐서 들어가면 괜찮은건가요?
휠과 타이어 + 여유공간 1cm정도 있어야해요. 측정해서 알아보셔야해요.
На компоненты резбы не нанёс смазывающие масла. Через время не сможет открутить.
Congratulazioni
Thanks.
What model rd you used for this bicycle...
Rd? Rear derailleur sensah srx pro 1 x 11.
Don't like SENSAH after doing testing .
👍👍👍
What type of brakes did you instal?
Two sides braking force ball bearing actuation system.
@@honza8713 what name?
@@Oldbikerestorations ZOOM Bicycle Disc Brake by AliExpress.
@@honza8713 ok, but ZOOM makes a lot of types disc brakes. Which type is in your bike?
@@Oldbikerestorations I don't know. It's cheap and I bought a popular product from people.
Is it worth it? Cheaper or more expansive?
I’m very satisfied after the build bike.
If the 26 wheels and other moving parts u have are still good a cheap option would be 26x1.75 tyres with touring/gravel profile and a narrow handlebar with bar-ends.. I cycled with that for years in the 90s and 00s
Ficou muito bonita. Se estivesse no seu lugar, tentaria manter uma coroa tripla em vez da única. Outrossim, colocaria freios de ferradura para reduzir o peso total, mas haja vista o propósito de pedalar por caminhos de cascalho e terra, os freios a disco são realmente mais profíquos.
Qual foi o valor despendido nestas melhorias? Abraços do Brasil 🇧🇷
Thanks! Total weighs 11.25kg and purchased about $350.
Коли зрозумієш що тормоза не вистачає, купи avid bb5 road. Сразу відчуєш різницю
Good work!
잘 보고갑니다.^^
감사합니다.
Itu ban luar ukuran brapa?
Tire is 35c.
@@honza8713 thank You
"Fortunately, 700c wheel fits 26" bike frame" lol, it was an easy fix
Lol mo Rin..🤬
After about 3 years the last Keurig stopped working th-cam.com/users/postUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf initially was able to unblock, however eventually we couldn't fix. That one was a replacement unit sent by the manufacturer after we had problems with our very first Keurig. This works fine (lol, at least for now) however I didn't realize the water reservoir was so much smaller than our prior unit. With 2 people having one or two cups of coffee each morning, it seems like I'm refilling it daily. Otherwise just happy to have the convenience of pod coffee vs. making a morning pot.
와우 저는 생각만하다 포기한걸 해버리셨네요 혹시파츠들 링크좀 공유해주실수이시나요??
알리에서 주문을 많이해서 파트마다 링크찾기가 힘드네요 ㅠㅠ 세일기간때 마다 구매해 놓았던거라…
Мне одному интересно как цепь увеличилась или нет? Просто так как он ее примерял, она вообже переключатель вывернуть должна в прямом углу к перу)))))))))))))))))))))))
Good work! The fork is 26" or 29"?
Thanks. Fork is 29”.
Hi,
What's the axle-to-crown length? Is there a big difference changing from 26" suspension? I have a rigid fork for a 700c wheel which id like to put on my 26" frame but measured it and calculated I'd lose about 4.4cm because it's not suspension adjusted.
@@davidramos9883 The size of the tire is important. If the tire gets bigger, it won't put on the frame. You need to change the fork to one with no suspension. Don’t put on to 700c wheels in 26” fork.
Chain to short, no Grease for assembly
Following sensah manual and I did it greased. Thanks
no way thats a 29" wheel.
Thanks. No problem.
brake
Thank you. I changed it.
Going 1by is a mistake
I know chain-line. Thanks
Agreed , as I am a veteran rider .
Danny from Sickbiker attests the downside of all 1X systems quite clearly .
No
Akala ko rimbreak s likod d pla
Can not installed rim brake because position not match bike frame is 26” wheel size 29”.
@@honza8713 This is why the conversion is not such a great idea . Component clearances are rather tight .
what is the tire size?
no reason to do this. its better have a new bike with modern new frame
It's fun