Carry on what with what your doing lads you will get better with time and practice, and remember everyone thinks they an expert just take on board what your interested in and disregard the negative stuff .
Guys next time if you got a runny nose go blow it and dont breath into the camera ;) and for that rifle would i buy a stronger spring for it instead of that gasspirng that most likely lowered the velocity, In USA does that rifle come with a 1200fps spring which is stronger then the ones here in Sweden that has a 900fps one mounted.
If I can kindly offer some observations?🙂 1. Don't do what Blocketh Outdoors does, lol. 2. Don't test your rifle differently, your first shooting position was from your elbows and your second shooting position was rested low on the bench. You must be consistent in your shooting technique. 3. The spring was not made that way, it was broken from much use. 4. A good steel coiled spring is better than a gas ram, because gas rams are more violent than a steel coiled spring. 5. Always debur your rifle before putting the piston back in. 6. Always clean your piston seal and check to see that it is not gouged.😃👍
There was nothing wrong with the spring tho but some one had put another spring in it in an attempt to make it stronger but I'm fairly sure it was to short to make any noticeable change.
@@springpistonriflefeverlone9611 I had to watch the clip again and yea the spring has snapped you can see it very well just as he pulls it out🤦♂️ and second of all that I totally neglected is the fact that if the spring was whole it would had popped the end piece straight out instead of the boy giving it a slight tug. I have had a few snapping on myself but not in that way tho it has been either in the other end or closer to the middle.
The person behind the camera needs to be quiet and let him do the video, it’s very annoying, let him do it himself or he won’t be successful on you tube, give him a chance, camera people work the camera and are quiet, not constantly butting in and interrupting the person in front of the camera, young man, get yourself a stand and film your videos on your own, otherwise not a bad job, just get the other two to stop interrupting you 👍👍👍
Fun video boys. Good on you. And don't worry, all little sisters are pesky wee things. Thank you from New Zealand
Carry on what with what your doing lads you will get better with time and practice, and remember everyone thinks they an expert just take on board what your interested in and disregard the negative stuff .
Good job guys, you will all only get even better!!
Dude really picking up the pellets with Twitters all i can say is wow .😂😂😂😂
Good job fellas 😊
Good job guys!
Guys next time if you got a runny nose go blow it and dont breath into the camera ;) and for that rifle would i buy a stronger spring for it instead of that gasspirng that most likely lowered the velocity, In USA does that rifle come with a 1200fps spring which is stronger then the ones here in Sweden that has a 900fps one mounted.
If I can kindly offer some observations?🙂
1. Don't do what Blocketh Outdoors does, lol.
2. Don't test your rifle differently, your first shooting position was from your elbows and your second shooting position was rested low on the bench. You must be consistent in your shooting technique.
3. The spring was not made that way, it was broken from much use.
4. A good steel coiled spring is better than a gas ram, because gas rams are more violent than a steel coiled spring.
5. Always debur your rifle before putting the piston back in.
6. Always clean your piston seal and check to see that it is not gouged.😃👍
โอเค How Much เท่าไร
There was nothing wrong with the spring tho but some one had put another spring in it in an attempt to make it stronger but I'm fairly sure it was to short to make any noticeable change.
@@LittleSweed Looked broken to me. I have had that happen in several of my springers.
@@springpistonriflefeverlone9611 I had to watch the clip again and yea the spring has snapped you can see it very well just as he pulls it out🤦♂️ and second of all that I totally neglected is the fact that if the spring was whole it would had popped the end piece straight out instead of the boy giving it a slight tug. I have had a few snapping on myself but not in that way tho it has been either in the other end or closer to the middle.
And kid behide need to let dude do what he doing ever time he say something you got to butt in and blow your nose
Younger boy has too much to say
So does the camera person, they both need to be quiet and let him do his video
The person behind the camera needs to be quiet and let him do the video, it’s very annoying, let him do it himself or he won’t be successful on you tube, give him a chance, camera people work the camera and are quiet, not constantly butting in and interrupting the person in front of the camera, young man, get yourself a stand and film your videos on your own, otherwise not a bad job, just get the other two to stop interrupting you 👍👍👍
🫡