ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Thanks to CarParts.com for sponsoring today’s video. Shop with confidence and find the right parts with their Lifetime Replacement Guarantee here: bit.ly/carpart...
HERE IN MY GARAGE…
Curious what we use in the shop on a daily basis? Check it out below. And if you purchase these tools from these links, you’re helping support Donut. We appreciate it!
Milwaukee Electric Tools 2550-20 M12 Rivet Tool (Bare Tool) www.amazon.com...
Milwaukee - 48-22-0125G - 25 ft. Magnetic Tape Measure - 2-Pack
www.amazon.com...
Milwaukee 48-59-1880 M18 REDLITHIUM HIGH OUTPUT XC 8 Ah Lithium-Ion Battery and M18 /M12 Charger Kit
www.amazon.com...
Milwaukee Angle Grinding 2781-22 M18 Fuel 4-1/2"/5" Slide, Kit
www.amazon.com...
Milwaukee 2735-20 18V Li-Ion Flashlight
www.amazon.com...
Milwaukee 2557-20 M12 Fuel 3/8" Ratchet
www.amazon.com...
Milwaukee 48-11-1880 M18 REDLITHIUM HIGH OUTPUT 18v 8.0 Ah Lithium-Ion Battery Pack
www.amazon.com...
Milwaukee 2125-21XC M12 LED Underhood Light Kit
www.amazon.com...
Milwaukee M18 FUEL 3/8" Compact Impact Wrench with Friction Ring
www.amazon.com...
Adenna Dark Light 9 mil Nitrile Powder Free Exam Gloves (Black), Large - Box of 100 (DLG676)
www.amazon.com...
Scott Shop Towels Original (75143), Blue, 55 Sheets / Standard Roll, 30 Rolls / Case (10 Bundles of 3 Rolls), 1,650 Towels / Case
www.amazon.com...
Zep Cherry Bomb Industrial Pumice Hand Cleaner - 48 Ounce (Case of 4) ZUCBHC48CA
www.amazon.com...
AIDEA Microfiber Cleaning Cloths-100PK
www.amazon.com...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv....
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv....
New to the Channel?
►Watch this: • POPULAR DONUT VIDEOS
We upload almost every day, subscribe so you don't miss out!
►Subscribe here: bit.ly/1JQ3qvO
Click here for more info on joining the Donut Underground!
► / @donut
Shop Donut Merch:
►www.donut.media/
Donut Media is at the center of digital media for the next generation of automotive and motorsports enthusiasts. We are drivers, drifters, and car enthusiasts who love to tell stories.
![[TH] FS vs BME - VCT Ascension Pacific - Lower Bracket Final](http://i.ytimg.com/vi/wnygqsR2Fig/mqdefault.jpg)
This is a very good "Every Chevy truck issue ever" video for anyone trying to figure out theirs. I was going through everything I checked/changed on mine because it wouldn't start and it was basically these same issues/parts.
Great job, Donut Media!
Nah, he hasn't had to weld in half of a new cab and replace 2/3 of the wiring.
Dude’s out here wearing an oil crisis shirt and legit guzzling gas.
Also this dude clearly knows his shit and is funny as hell yo donut hire this man
Yes, agreed. He's pretty knowledgeable in that field, minus the battery diagnosis.
@port nut I mean yeah he probably could have but that’s kinda not the spirit of the contest is it?
@@areminderofwhatweare The rules only list what you can't do or must do......everything else is fair game. I would have wired the hei directly to the battery and jumped the starter with a screwdriver. This would have been a very easy challenge, but then again I own a 79 C20 that I have done EVERYTHING to, including rewiring all of it, replacing all the fuel lines for the dual tank setup, installed a gearvendors od, upgraded the engine to a 406 sbc with a forged crank and aluminum top end, electric locks and windows, autometer pro comp gauges, etc.
@@CGT80 sure but like, the rules of basketball are get the ball in the net, if I perch on top of the backboard like a fleshy gargoyle with a big sack of balls (or a big ballsack, take your pick) throwing balls into the net I’m technically getting them in but I’m not really playing the game of basketball am I?
@@areminderofwhatweare I don't watch sports and have zero interest in playing basketball, but if it isn't against the rules, go for it. Do basketball teams not pass the ball to a person waiting in a good location to easily get the ball in the net? I would bet the way the game is started would prevent you from doing what you described if you were a single player. If players on a team don't do that, then it is either not possible or practical or against rules....there are plenty of people out there just to win. I do watch Cleetus McFarland (for the mechanics, story, and characters/people, not really the racing) where they do what they can to win races and they have run their car with no coolant on a hurt engine and gambled further damaging it to win the race or set a new record. It depends on the players' goals. I compete in shooting competitions where I have to decide how I want to tackle a course of fire and there are sometimes shortcuts you can use that do not break the rules but require creative thinking or planning. Each course will have directions and /or requirements that vary and a big part of the game is for each shooter to decide what order and method to use to get the hits as fast as possible to have the fastest time.
I am 23, i have worked in and out of despicable shops since i was 15 grunting my way up in order to learn what i needed to make a Career for myself. This channel provides all the information i quite literally had to fight (hand to hand) to learn. No other yt channel can say that they influenced entire careers for young adults across the entire country and to say that is invaluable would be a complete understatement to what this team does for aspiring mechanics. Im gonna go ahead and say thank you on the behalf of everyone for everything this channel has done.
Good on you mate, sounds like you're doing well. I'm 22 myself and I've been working as a mechanics apprentice for a few months, real rough industry but I love it so far. I figured out pretty quick a good way to earn some points with the older blokes is to volunteer to do the bits of the job that are uncomfortable, annoying, painful or just gross. If you've got any tips for someone new to the industry I'd appreciate it.
Same
24 this December wby lol
That's just stupid.
We just bought a Chevrolet Truck! Only one problem, it doesn't run! Chevy owners felt that.
i love your videos bawz keep healthy and uploading more content
yo Odd wzzuuuuup
OddBawZ + PhlyDaily A10 video!?! Would be cool to see one calling out targets from the ground with the other coming in for the brrrrrrrrt.
And they didn't even have to sabotage it, it just came that way
It be like that, bought my El Camino 6 months ago and still has no drivetrain. Only been 48 years since a it’s ran lol
Considering he diagnosed so quickly, and it was mostly the pain in the ass installations taking up most the time, it's cool he got the huge hint at the end.
proof that Chevy designers will pass up _______ to f the mechanic in the____
@@ddjohnson9717 did you have a stroke?
@@tomchillen3039 yeah
@@ddjohnson9717 i hope you are ok now
@@ddjohnson9717 are you scared to say bad words? Is your mommy next to you
This was a fun challenge to be a part of behind the scenes! Never been asked to help sabotage a car until Donut called 🤣
Surprised he found the pushrod surprise!
Look who I found one of your fans here how you doing buddy
This was fun to watch. It's like amazing race in a garage.
Agree
Aaron should be on the team or at least an occasional guest. He has enough knowledge about cars. He's ambitious and most importantly he's comfortable in front of the camera. I say bring Aaron on the show more!!!
Nah
idk the dude thought 12v was low for a 12v battery
@@ArmandoFloresAvila No need to be mean about it
@@BassmentBrain multimeter voltage test ≠ load test
@@5.43v idk he still asked for a new battery when it’s pretty common to know 12.6v is perfectly fine
“I mostly work on Fords” proceeds to suck on a fuel line. Love this guy. Lol
Haha he drank some Chevy blood and hes turning into a Chevy boy soon
🤣🤣
I laughed when he said that. Thought, well this should be entertaining.
Man, Pumphry legit saved his ass by pointing out the throttle cable. Aaron almost went home car-less.
They'd of gave him the car, if they didn't they'd of lost half their subs...like me I'd of been pissed, I was already mad about the pushrod, that was underhanded and you had to almost be a master mechanic to spot it or done a boat load of fuel pumps
@@breakingames7772 I have to agree with you Aaron put in the work, and showed his talent. If he would have left carless a lot of people would have been upset.
@@edd2184 I would think opposite, this entire series is so fun cause there is a consequence causing suspense, if you remove all negative outcomes from it it'll become boring to watch since you know they're getting a car no matter what removing all sense of suspense.
@@breakingames7772 the whole point of the show is you either fix it and keep the car or you don’t. They don’t say anywhere that they are gonna make it easy for the people selected. I don’t see any reason to get mad about it, just watch the show and be entertained. Clearly they are picking people that are suited for the cars they make them work on.
wow dude spoiler alert geez
15:20 the what time?
I think this is one of the best series on this channel
The best
This and hi-low
I know nothing about cars but I want to learn and a series like this is so awesome. The educational aspect of it is really helpful and makes it easier to understand with the animations. Great series!
Man that was so close. Was feeling bad for the guy. Glad that he got it running.
Can't wait for the next episode.
I doubt they'll ever make someone lose the car
James totally gave it to him by asking about the throttle cable.
@*✯CLAUDIA｡*ﾟ✯* lmao
I was rooting for him that's all I can say, and I'm so glad he got the truck 🎊 🤗 🎉 🏆
@@theesenapi don’t tag the bots, you’ll make them come back.
Aron and donuts relationship brought a smile to my face
If you ever need someone that’s very likely to fail one of these challenges… you always got me :)
I think I could do it if I was by myself. Zero chance with those guys watching over my shoulder. I would love to hang out with them tho
@@pigtrapper1329 they're giving a lot of hints tho
@@pigtrapper1329 I feel the same way haha! All the knowledge I do have came from TH-cam videos. I would be interested to see if all my “studying” would pay off!
Same lol you could give me 2 weeks and I still would be struggling
I would cheat and make you win because I want you to be a winner
Seriously, this series as well as High & Low, is it worth it, are probably my favorite from you guys!
One of the best channels of all of TH-cam 👍
This really helped me help my mans start his car! Keep being great Donut 🙏🏽
Dudes, this is the best series ever. And my favorite part about it is here you guys are, giving away cars when used car values are ballooned. You guys are great people.
That guy just made 60 grand lol
It's sponsored man
Look how nervous James was for Aaron at the end. He was so happy the truck started, that his face was literally red lol
I would be feeling the same way if I was in that situation.
Imagine how red his face would have been, if after he started the engine, the drive shaft would brake apart again like last episode.
8 am upload, wow what a great start to the day
Its 4 pm where im at, but i can stoll relate with you since i only just woke up
I’m a helicopter mechanic and can fix a Blackhawk but trying to transfer what I understand to cars honestly leaves my lost in the sauce, kudos to these guys
Dude i love this new series, the learning part of it and finding ways to determine what’s wrong with it is the best part
I love how I didn’t know nothing about car a year a half ago and the fact that I can learn while the channel grows it’s awesome, because I am not a car guy but this channel makes me wish I was!!! I love this channel!! D-D-D-D-list
I was the previous owner of this truck.. I was sad to see her go………… hope he enjoys her as much as we did…….
oh really?
Cap
Cap
This might be my favorite series Donut has ever done tbh. Super informative, super entertaining, and we get all of the hosts together in one video. Each guest has been pretty cool too. I especially liked Aaron in this one. 👍
I'm a young mechanic barely getting into it about 5 years ago when I made it my mission to get my grandpa's 1982 f100 running after he passed away. It hurt me watching rot on the driveway so I decided to watch TH-cam videos and get ford literature to look at. It brings joy hearing that engine crank and try to run in fact I have that feeling in my throat like crying while writing this comment because it reminds me of when I finally got my grandpa's truck to run after such a long time. Going from very little knowledge to knowing as much as I know now is proof that you can learn so much from just jumping into working on a project vehicle. Working with your hands and having that drive to get something done.
Donut, please never stop making this show! So fun to watch on Sunday mornings 😁
Monday*
@@anderstermansen130 do you know that time zones exist?
This guy is amazing. Hire him. Give him a series.
he didnt even know that a battery is full at 12.6 volts lol
@@roachwerks3043 i take it you've never worked in front of like 6 people with a time constraint
Be teaching us to drink gas and taste what fluid is leaking 😅😅😅
@@roachwerks3043
Neither did you.
@@higgy82 I mean I did tho. And I’m not saying this guy did bad but nobody is giving him his own show lol
This is the best series I’ve seen on the channel so entertaining. Real mechanics reacting is a close second on the other channel
For that fuel rod, take some grease and put it on both ends. It helps lube the fuel pump and the grease will hold it in place when you push it into the block so it doesn't fall down
Or you can just put a new synchronizer on each double lopsided gearpair, and new ball bearings on the exhaust fans.
Optionally the fuel pipes needs to be redirected to the toprad via the engine block directly to the alphatronic!
@@anderstermansen130 ah shit why didn't I think of that
@@anderstermansen130 Be careful about joking around.....I used to joke about muffler bearings or blinker fluid for my 79 C20 (I could have easily got this truck going with less work jumping the distributor to the battery and jumping the starter if needed) and now my 2020 2500hd takes exhaust fluid. Who ever thought exhaust fluid would be a thing?
instead of taking time off if they request the wrong part, you should just give them the wrong part lol
Lol. That would be interesting but someone would ask for a part they don’t have. They only prepare for the parts they sabotage
@@lvr1028 good point. And it wouldn't be very fun watching a video of 2 hours worth of head gasket repair just to see them not get a car at the end chasing gremlins. I think taking 10 minutes off for a bad part is perfect. You could waste literal weeks doing that in real scenarios
nahh that would take longer for them to install in some cases and they don't have time to take everything out to check it well so taking time off is probably a better way to do it when you are trying to create a youtube video
I got my miata na turbo forged motor build started today due to this video. I was overthinking why it would not start and spent hours in tuner studio adjusting settings. Came in the house to take a break and eat some food to clear my head and stumbled across this video. When the ground topic came up I was like "Shit, I never reinstalled the ground strap from the head to the body. Couldn't find the OG so I made a new ground strap and vroom!!! she started right up! Now the tune is way off and I need to adjust my timing, but the new forged motor is purring. Easiest subscribe and like I made all year! Love the series - Keep them coming! A big Thanks to your crew!
I love that y’all where ripping into him in the first half then helped him make it in the end. Y’all keep each video really dynamic and interesting to watch. Keep it up donut🤙
"Don't drink gas" should definitely be a t-shirt
But some Clorox drinking people could get offended, haha
A true experienced mechanic, dude killed it
this guy felt like one of the host of donuts. the chemistry with mr mopower baby was insane. give this man a show about trucks.
I think Donut is too nice to not stop someone from getting a car.
Honestly, they straight up told him what he missed at the very end lol
@@MarksterC Yeah but it wasn't the main issue to be fixed so I'll let it slide lol
FYI there is a very short bolt in the front of the engine that covers a hole that a longer bolt will lock the pushrod up so fuel pump removal and installation is easy and you do not need to fight the pushrod. It's just below the freeze plug on the front of the motor right side.
Big respect to you guys for being helpful with the more frustrating parts, makes it feel more fair and not just like you’re picking on people 👍🏻
Small block Chevy has a bolt in the front of the block near the fuel pump. It was a left over from the previous pre 1955 motor mount design. You can pull that bolt out put your favorite flat head screwdriver in to hold the rod up putting in the new pump. Just make sure to throw a little silicone on a washer when you put that bolt in. Oil from the crank will leak out if you don’t.
Would love to be part of this series, even if I’ve never worked on a car before 😪
I wonder if they would make it easier if they knew some poeple know nothing about working on cars
Maybe 3 or 4 hours lol
tell them you're an
amateur car hobby guy
Shi i would just love to learn abt cars hands on with these guys
Win or lose
I love this series. Apart from all the other videos this one has a challenge and a reward so it makes it more nerve wracking.
In case there’s an engine being an ass with fitting the pushrod during fuel pump replacement, it’s safe to use standard “palm size”- a glob of petroleum jelly to help hold it in place. Soon as engine starts it dissipates with heat and will not harm anything, just like it doesn’t harm your hand from the friction.
Considering that he was working for a crowd and knowing he was on camera on the most viewed car channel out there he did a great job!!
Guy: 12.6v seems low.
Crew: No it’s perfect! (Then proceeds to explain how many volts needed for each cell)
Guy: I think I need a battery! ☝️
😂
Guy is dumb. But at least he got a new distributor cap and rotor when he didn't need them and they didn't take time off. The last thing they did was tell him what to connect so it would start.
theres a bolt on the front of the block that goes into the cavity where the fuel pump bolts up. that allows you to put a screw driver into it and hold the push rod up while installing the fuel pump. just need a little rtv on the bolt when you put it back in.
finally able to get a donut video under 1 hour, also good job to Aaron for fixing the truck with nearly 1 minute to spare!
Realistically, we're gonna need a new set of rocker panels from the parts trunk as well as an unbent hood😂😂😂
Tell me you know 73-80 c10s without actually telling me 😂
Woah man. Jobe hitting that “nick of time!” like that scared me.
BRUH fr LMAO
my heart skipped a beat istg
I was rooting for him that's all I can say, and I'm so glad he got the truck 🎊 🤗 🎉 🏆
FOR REAL
@@icosthop9998 missing da point
I remember when these were for sale for 2gs now a donor is no less than 6 I'm so jealous of this man
For real I've been trying to find a daily work truck and they want 6k for a clapped rust bucket, they're about to drop in proce through because of gas prices
@@AndrewB23 gas prices aren't going to affect the value of a collectors item lol this.
@@AndrewB23 that’s only really the case with things that aren’t classics because generally people don’t daily classics so the fuel prices don’t matter, if you do daily a classic I envy you as you are a crazy bastard.
I’ve been a technician for almost a decade and I love this show. It’s great to see these techs get this done.
I love you guys started this series. It's amazing the amount of time and effort your guys put into your crew and your viewers. I literally only pay a subscription to you guys and haven't regretted since. Keep up the awesome work guys can't wait when y'all's videos drop
Such a great series! Keep em coming boys! I don't know shit about a car's mechanics but this is a great way to learn about the inner workings of what I'm driving to work everyday. No, not a C10 just a car in general. 😊
I hope this series is to stay at least for a while, seriously enjoying it :)
MY MAN AARON IS A FREAKING JENIUS MAN, HE DIAGNOSED SO QUICKLY
I'm really enjoying these videos! For an automotive fan who really hasn't had much if any experience directly working on cars, I'm learning a lot from the way each problem is explained. Keep it up Donut!
This was awesome - I’m not even a big car guy but I could watch this kind of material all day. Plus, learned a ton about engines in an interesting way! Great work
To hold that pushrod in place there is a bolt hole in the front of the block. You can put a long bolt in there (3/8x16 if memory serves) and it will hold the push rod in place while you mount the plate and pump.
The fact they were shocked when he sucked on the gas line threw me for a loop. I learned to do that so early on because it's easier than taking to time to get a hand pump
No school like the old school
This was literally the most exciting thing I've ever seen on TH-cam 😬 edge of my seat the whole time.
I love this channel and this show! entertaining and educational great stuff
"Do you need water ?"
"I WANT A FUEL PUMPP!" got me lmao
The count down timer is just gold🤣
Now that's something I'd definitely want to win not that I wouldn't want the others but old chevys are most of my dream cars
I'd be fucked tho I'd never fix it in time
This is the best series y'all have ever made. Please never stop. This might be my favorite TH-cam content of ALL. TIME.
That's awesome. I'm so glad they helped him out with the throttle cable advice. Dude really deserved it.
No one has ever lost. Nice of you guys to allow them a bit extra time
running or not that c10 had me drooling. i love square bodies with a bleeding passion.
This is my favorite series on donut for sure
It amazes me how little of his education he applied in diagnosing the car
I don’t know much about engines or cars at all.. and neither do my parents so they didn’t have much car knowledge to pass down to me. But the amount I learn from your videos is incredible. Not to mention how entertaining and enjoyable all you guys are to watch. Thank you, Donut ❤️ absolute top notch content creators.
Day 323 of asking Donut to bring old B2B back
yesss
I do miss the old B2B I wanna see those reviews again but this time with James and Jeremiah
I think it would be really cool to see a Donut Media and Doug DeMuro collaboration
I’m an equipment operator in the Navy Seabees and my best friend is a CM, I swear that guy can fix anything but a broken heart. I’d love to see him on this show to see if he could pull it off.
Another way to diagnose a distributor 180 degrees out is if you find where cylinder 1 is, take the plug out of the cylinder and put your thumb on the hole where the plug was then bring the motor up to the compression stroke you'll hear a hiss and feel pressure on your thumb have whoever stop cracking the motor and check what cylinder the rotor is pointing to
A very cool step-by-step breakdown, of what a good mechanic would approach during Car fixtures. Very nice. Triple thumbs up 👍👍👍 for this episode
That should have been a 30 minute diagnose and repair. The fuel pump drive rod has a neat trick that you don’t need to remove the plate. It’s called a pick. And no need to turn the engine over to get by the cam lobe. The fuel pump can easily be pushed in
7:00 Not all older fuel pumps can self prime though, especially mechanical ones. Some require fuel in them initially, in order to carry on pumping fuel.
Love this series. Love how you asked is the throttle cable connected to the carb. You wanted him to take that truck home. Love u guys... he deserved it...
I am from Philippines, I am a huge fan. I am using a Kia Pride 1995, in you country itbis known by the name ford festiva. Please do a video like engine swapping using the latest engine that would fit in.
I am excited for that and see how you guys do it!
Tip on those fuel pump rods. Grease will help hold it up in the hole while you bolt on the new pump.
Genius video idea. Teaching in an entertaining way. Very impressed, but this isn’t the first time on this channel 😊
That's a beautiful truck, especially the color, love the box body style.
Do it with an old dentside (73-79 Ford) and I’ll come out there and do it with joy even if I don’t get the truck I just love workin on my old dentside fords
I had to replace the mechanical fuel pump on my truck, a few months ago. It is a 84 Chevy K10 4x4, long bed. But mine has a 6.2L Diesel.
fuel pump rod, trick. front of the block by the Punp there's a bolt. before pulling the pump tighten the bolt. pill pump and you'll see the bolt keeps the rod in place and where it won't fall.
Funny how his experience with newer cars caused him to struggle with this c10. Put grease on the pushrod, it will hold it in the bore long enough to get the pump on the lobe position makes it harder but you can get it installed
This was much more satisfying than I was expecting.
Seeing a hand next to the fan blades while it’s spinning is bringing me back bad flashbacks. My old ‘78 c20 fan split my hand open one time
When you got to the distributer part I thought Oh, that's the new style HEI, Then I remembered what year it is. Thanks, Love it!
"Chevy why'd you do this" the #1 question I ask anytime I grab a wrench
Man they are cool, they even knew the throttle cable wasn’t connected and they told him just to have enough time for him to finish and take the truck home!! That’s an awesome crew!!!
I love how they give them the last detail
Genuinely love this, the entire crew works so well together and on top of the great humor and content in general I get to learn things. :)
This man deserves this truck he’s good man !
I don't even like cars, but this? Entertaining *and* enlightening.
I would have got it started to with the same issues. Especially old school ones. Good job guy👍
I’d love to see a video just like this but with Derek from Vice Grip Garage doing the fixes. 😀
Love the explainers. Leaned a lot about how the engine and components work thanks to this video!
id love to see a little intro with the contestant and their experience, background,etc., would be really great !