MY MUST HAVE NEXT GEN RANGER MODS

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ก.ย. 2024

ความคิดเห็น • 37

  • @shanenorwell8580
    @shanenorwell8580 ปีที่แล้ว +4

    Love the build mate but you need to disconnect the tent from the cab of the vehicle. The cab and the tub are mounted to the cab completely differently and will move independently of each other on rough roads and when flexing the vehicle. Something will end up breaking or cracking over time.

    • @4x4CampingandAdventures
      @4x4CampingandAdventures  ปีที่แล้ว +1

      Agreed that’s why I’m going a rack real soon to keep it separated thanks for watching mate

  • @Mosesk1988
    @Mosesk1988 ปีที่แล้ว +2

    Exactly what i did built wise to my ranger, keeping it simple, compared to my ol patrol which had litterally everything over weight bulky😂.
    Dual battery, single draw same as yours haha built a lift up side compartment for my storage. 50L watee tank with a pressure pump against head board. 2inch lift, 285s. No bullbar or heavy shit bolted to it. Basic is better haha especially when i tow me camper also. Killer setup!
    Has you fuel econ jumped up a bit. I spose amything around 10L per 100 is better then the A v8 petrol haha.

    • @4x4CampingandAdventures
      @4x4CampingandAdventures  ปีที่แล้ว

      Yeah it has mate she’s around 9.5 now 😂😂 I still can’t get used to this fuel economy, basic is definitely better mate I’m going to have to look at suspension at some point in the rear for the weight

  • @WestOzThommo
    @WestOzThommo ปีที่แล้ว +1

    Looking forward to having a look around the rig at camp, beer in hand brother. Can check the car out afterwards too!!

  • @Malc664
    @Malc664 ปีที่แล้ว +1

    I like how it's comin' along and would be interested in seeing the spotlight performance at night.

    • @4x4CampingandAdventures
      @4x4CampingandAdventures  ปีที่แล้ว

      I’ll see what I can do still got to wait for my Stedi dash switch’s so I can hook it all up

  • @beauwildie
    @beauwildie ปีที่แล้ว +1

    Perfect simple setup

  • @angeloudy
    @angeloudy 11 หลายเดือนก่อน

    I see you bolted it down both the canopy and the cab roof. Anything you have done to the mounts to allow the flex between the cab and canopy?

    • @4x4CampingandAdventures
      @4x4CampingandAdventures  11 หลายเดือนก่อน

      I have now changed this mate was putting to much stress on the bar on the body now it’s got a flat tray which extends out further and it’s a much better setup

  • @kurtcourtney
    @kurtcourtney 7 หลายเดือนก่อน

    Nice build bro. Just curious how the standard suspension is holding up with the load so far? Im looking at a next gen as my next car. They say they increased rear spring loading aye? Thinking of keeping things real simple like this one.

    • @4x4CampingandAdventures
      @4x4CampingandAdventures  7 หลายเดือนก่อน +1

      At the moment shes struggling with the extra weight mate but its got about 250kg over the rear

    • @kurtcourtney
      @kurtcourtney 7 หลายเดือนก่อน

      Noted, yeah i had to go +300kg in the rear and 100 in the front on my dmax. Looking at upgrading to the ranger, I like the simplicity of your set up. I see in the more recent posts you went to rims and 285s was it? What offset did you have to run with them? ​@@4x4CampingandAdventures

    • @4x4CampingandAdventures
      @4x4CampingandAdventures  7 หลายเดือนก่อน +1

      Hey mate they are +25 ROH assaults and yeah I love the simplicity of it!

  • @garethharrison3843
    @garethharrison3843 ปีที่แล้ว

    See your 12v set up. Would that work on Px2 2016 model. The switch panel etc. Lovely and neat.

    • @4x4CampingandAdventures
      @4x4CampingandAdventures  ปีที่แล้ว

      No idea mate I have never owned another model of ranger so I’m not familiar with them.

  • @ryantilley-general.shenanigans
    @ryantilley-general.shenanigans ปีที่แล้ว

    Love it mate, nice and simple can't wait to see that pantry set up.
    Any issues with the RTT mounted to the cab and to the canopy in regards to movement of the body?

    • @4x4CampingandAdventures
      @4x4CampingandAdventures  ปีที่แล้ว +1

      None so far but it won’t be a long term thing I have a rack on order which will be much better

  • @rollyb5061
    @rollyb5061 ปีที่แล้ว

    looking great Brayden, these builds take time

  • @davidwoods9590
    @davidwoods9590 6 หลายเดือนก่อน

    Hi there I am putting a arb roof top tent canopy and awning on my next gen ranger do you have any issues with weight ?? Cheers

  • @piratecampco
    @piratecampco ปีที่แล้ว +3

    Love the build! Thanks for the support legend 🤘🏽🏴‍☠️

  • @michaelhermans4753
    @michaelhermans4753 ปีที่แล้ว

    How much weight can the rtt take?
    What’s the load rating of the canopy

  • @westralianoffroad
    @westralianoffroad ปีที่แล้ว +1

    I like it!

  • @plrooks
    @plrooks 6 หลายเดือนก่อน

    Great video. How do you find the maxliner canopy for letting in dust over the summer? Cause i noticed that it doesnt come with a positive air vent. Also are you planning on making the side pantry for your window yourself or buying something? Cheers

    • @4x4CampingandAdventures
      @4x4CampingandAdventures  6 หลายเดือนก่อน

      Planning on making something mate when I get around to it 🤣 and yeah the canopy is pretty clean mate not much dust gets in I do have the front window cracked to let some air through

  • @maxyarra4051
    @maxyarra4051 ปีที่แล้ว

    Great video mate, like the simplicity.
    I could be totally wrong, but i thought wheel spacers were illegal in Australia?

    • @4x4CampingandAdventures
      @4x4CampingandAdventures  ปีที่แล้ว

      Honestly I have no idea I have never looked up the legality of spacers?

  • @sexywhale91
    @sexywhale91 ปีที่แล้ว +1

    Looking schmick!