Hi I have done snaps with the cropadile before- depending on if it it flat or curved you’d use the setting B1 (for flat) or D3 if curved Here is a link to the settings chart images.app.goo.gl/4gz7N2qq4f3onmqq8 Hope this helps
Please update this so the hole punch action is visible! I was using the eyelet setting part of the tool to try to punch holes and didn't know hole punching happens on top until I watched your FB video. Thanks!
Hi you are most welcome. I’ve had my case for many years and probably purchased it directly from weRMemory keepers- you can google them or probably find it on amazon. Thank you so much for watching
Nice thanks for sharing! I have a question about the size doea 1/8 inch or 3/16 in eyelet punch work on 1/4 hole? Im planning to buy one, i have hole puncher 1/4in already just need eyelet setter punch
Hi there I recently did a refresher for the cropadile on Facebook- I haven’t transferred the video here yet but you can watch the replay at this link facebook.com/frappsandscraps/videos/1405914356585246/?vh=e
Should have been a really useful video but you haven’t got most of the tool in shot and it’s not at all obvious what you’re doing. Really disappointing.
Thanks for the feedback- this is quite an old video on my channel and I have since made a Facebook video on the same topic- I will work on putting the Facebook video here as well
Hello! 👋Thank you for the video! loved it! 😊 Icing
WOW Thanks , it’s so simple, it did look intimidating
Glad I could help- thanks for watching
Hi and thank you. Can you tell me if I can use the Crop-a-dole to put in snap fasteners and poppers please. XXXX😊
Hi I have done snaps with the cropadile before- depending on if it it flat or curved you’d use the setting
B1 (for flat) or D3 if curved
Here is a link to the settings chart
images.app.goo.gl/4gz7N2qq4f3onmqq8
Hope this helps
Hi and thank you so much for your help xxxxx
Thank you. This is exactly what I’ve been looking for. A video demonstrating if and how to use a Crop-a-dile with snaplock studs. 👍
Great intro ! I have one of these and I loveeee how versatile it is ! I also use the it for punching eyelets on my belt haha
Tiny Tae’s shenanigans yes it is such a great gadget to have.. I use it so often 😀
Lol...ah yes the little hammer against a brick to hammer the eyelet in place..had to use it outside...nice informative video...thanks for uploading
@@maryt2196 lol good memories but wayyy more convenience in this tool
Thank you for this!! So easy once I know how to use it 😅
You are most welcome ♥️
Please update this so the hole punch action is visible! I was using the eyelet setting part of the tool to try to punch holes and didn't know hole punching happens on top until I watched your FB video. Thanks!
My latest video is much better- check it out here th-cam.com/video/XkcIm9vKS9A/w-d-xo.html
Hi, thank you for showing us. How to use it.. I have the crop a dile I would like to know where you bought the case did you get it at Amazon?
Hi you are most welcome. I’ve had my case for many years and probably purchased it directly from weRMemory keepers- you can google them or probably find it on amazon. Thank you so much for watching
Can you use this tool with Cam snaps the plastic ones? Thank you so much.
@@marysiddons6400 this tool does have a setting for snaps- not sure what sizes or if it will work with plastic
Nice thanks for sharing!
I have a question about the size doea 1/8 inch or 3/16 in eyelet punch work on 1/4 hole?
Im planning to buy one, i have hole puncher 1/4in already just need eyelet setter punch
Thanks for the info bud
I bought mine used but I use it to make parrot toys. The hole punch will go through puzzle pieces easily. I love it.
It is an awesome hole punch too! Thanks for watching 😃
How do you get the back nice and smooth? Is there some kind of pressure technique?
You just need to have the right settings on the dials.. A1 and C3 are the 2 settings I use most often
I also have a Facebook live going over all the settings- check it out here fb.watch/7t1oIYPVr5/
Thanks sooooo much. I still don’t get it but I will play it over & over, for my little brain. Getting OLD is the s--s.
Well. Most of the example was out of the range of the camera so all you could do is hear her. That’s probably why. lol.
Does it set metal snappers?
To my knowledge it only does eyelets but you could double check with the manufacturers website
Cool
Please be aware of staying in frame when filming. Video does not help if we can’t see what you are doing. Thanks
My latest video is much better- check it out here th-cam.com/video/XkcIm9vKS9A/w-d-xo.html
I could not see the back!
Hi there I recently did a refresher for the cropadile on Facebook- I haven’t transferred the video here yet but you can watch the replay at this link facebook.com/frappsandscraps/videos/1405914356585246/?vh=e
Cannot hear you
This is an earlier video - try this newer one th-cam.com/video/XkcIm9vKS9A/w-d-xo.html
You are off camera!
Every time your punching it’s off screen , poor video
Hi Nancy this video is an older one- please refer to a few of the newer ones for better visibility
Disappointed, the title said how to use it and eyelet setting and I didn't see the last. It's a nice tool though
In the description of this video I do provide a link to one of my other videos with more in depth instructions on this tool
fb.watch/70ELA0Wqh9
Should have been a really useful video but you haven’t got most of the tool in shot and it’s not at all obvious what you’re doing. Really disappointing.
There is a link in the description for an updated video with better views
the scratchy voice was irritating to listen to, though the info was useful.
Sorry you found my voice irritating- glad you found the information useful
Please be aware of staying in frame when filming. Video does not help if we can’t see what you are doing. Thanks
Thanks for the feedback- this is quite an old video on my channel and I have since made a Facebook video on the same topic- I will work on putting the Facebook video here as well
Can't see what your doing😢