Hello everyone! I found a solution that helped me do exactly the same as the teacher. And even all the parameters work very well for me. In the formula I had to double it by 2 for a DN =12. After that, when I set all the formulas; I could get it. I hope you understand what I'm talking about. This teacher is very good, he makes a great contribution. I hope God multiplies what he is doing. Thank you!!!!!!
How to create "Lookup table" th-cam.com/video/mCT7K1WEn7Q/w-d-xo.html How to create "Nut revit family" th-cam.com/video/fZEyv4arABY/w-d-xo.html How to create "Thread revit family" th-cam.com/video/8N15rNrFwK4/w-d-xo.html How to create "washer revit family" th-cam.com/video/Syd7PtQDeZc/w-d-xo.html
In the previous thread family creation session you created, the pitch size was 4mm for a 16mm nominal diameter. but here we are using a 2mm pitch for a 16mm nominal diameter thread. I could not create a 2mm pitch for a 16mm nominal diameter thread due to the line length being too short. Can you please assist with a 2mm pitch thread family creation?
if I may ask the profiles on the bolt thread were created by the triangle command using 4mm(2mm pitch reference lines ) on the sweep blend in the "How to create Thread revit family" video (from min 4:55- onwards) but in this video, the profile is only on 2 mm and shifted downwards to the center of the reference lines based on the pitch. is this an updated version of the bolt thread or there's a command I'm missing on mine. please assist if you get a chance
You can use your bolt thread manufactures dimension and create. There are min: 0.8mm dimension/length revit allow. If not you will get error. So that you need to play and check your parameter's formula to achieve the min: dimension
Hi! In the previous thread family creation session you created, the pitch size was 4mm for a 16mm nominal diameter. but here we are using a 2mm pitch for a 16mm nominal diameter thread. I could not create a 2mm pitch for a 16mm nominal diameter thread due to the line length being too short. Can you please assist with a 2mm pitch thread family creation?
You present the solution below. But it doesn't really work. I don't know if it would be possible to show a video indicating how you get from a size M16 to 2.20. Thank you!
When I go to class (th-cam.com/video/8N15rNrFwK4/w-d-xo.html). The family looks very different from the one being run. The one being run is thinner than the one in the class (th-cam.com/video/8N15rNrFwK4/w-d-xo.html). When I do the sweep it goes wrong.
Hello everyone!
I found a solution that helped me do exactly the same as the teacher. And even all the parameters work very well for me. In the formula I had to double it by 2 for a DN =12. After that, when I set all the formulas; I could get it. I hope you understand what I'm talking about.
This teacher is very good, he makes a great contribution. I hope God multiplies what he is doing.
Thank you!!!!!!
How to create "Lookup table" th-cam.com/video/mCT7K1WEn7Q/w-d-xo.html
How to create "Nut revit family" th-cam.com/video/fZEyv4arABY/w-d-xo.html
How to create "Thread revit family" th-cam.com/video/8N15rNrFwK4/w-d-xo.html
How to create "washer revit family" th-cam.com/video/Syd7PtQDeZc/w-d-xo.html
🤩🤩🤩🤩😊
In the previous thread family creation session you created, the pitch size was 4mm for a 16mm nominal diameter. but here we are using a 2mm pitch for a 16mm nominal diameter thread. I could not create a 2mm pitch for a 16mm nominal diameter thread due to the line length being too short. Can you please assist with a 2mm pitch thread family creation?
Revit only allow min 0.8mm line length. You can your pitch height
Thanks for your update! Instead of the female pitch, I created a male pitch thread.
how do you move the object from the face, if it is a face based family?
Please can find here th-cam.com/video/D0UmxBbPKKs/w-d-xo.html
if I may ask the profiles on the bolt thread were created by the triangle command using 4mm(2mm pitch reference lines ) on the sweep blend in the "How to create Thread revit family" video (from min 4:55- onwards) but in this video, the profile is only on 2 mm and shifted downwards to the center of the reference lines based on the pitch. is this an updated version of the bolt thread or there's a command I'm missing on mine. please assist if you get a chance
You can use your bolt thread manufactures dimension and create. There are min: 0.8mm dimension/length revit allow. If not you will get error. So that you need to play and check your parameter's formula to achieve the min: dimension
Hi!
In the previous thread family creation session you created, the pitch size was 4mm for a 16mm nominal diameter. but here we are using a 2mm pitch for a 16mm nominal diameter thread. I could not create a 2mm pitch for a 16mm nominal diameter thread due to the line length being too short. Can you please assist with a 2mm pitch thread family creation?
hey wanted to ask how is the thread pitch 2.2 at ND 16 in the look up table it should be 2 ?
Please you can play and try it.
You present the solution below. But it doesn't really work.
I don't know if it would be possible to show a video indicating how you get from a size M16 to 2.20.
Thank you!
After update pitch value in CSV file, re-import it in Revit. And check and play the parameter. You can do it till the value which you satisfy.
@@ThomRVT Thank you!
(size_lookup(Lookup Table Name, "P", Nominal Diameter*0.1, Nominal Diameter))*2
When I go to class (th-cam.com/video/8N15rNrFwK4/w-d-xo.html). The family looks very different from the one being run. The one being run is thinner than the one in the class (th-cam.com/video/8N15rNrFwK4/w-d-xo.html). When I do the sweep it goes wrong.