Not a bad explanation, however, the green inputs are for switching which oscillator is the modifying source for each of the oscillators, with the indicators functioning as follows: the red and yellow lights are indicators counting counter-clockwise, with no light being directly adjacent, yellow next, then red, then both. The blue lights indicate that instead of the source functioning as a trigger for S/H functions, the positive swing invokes an S/H function and the negative swing invokes a tracking of the carrier so you get a Track-and-Hold output when the blue light is on. Hope this helps make sense of things.
@@FemiFleming Pugix is truly a master of this device. I'd call it an instrument but it is so much more than that. One thing I would STRONGLY recommend is getting your hands on 3.5mm banana ends and drop the male ends into at least the Quantussy sockets then start bridging connections with your fingers. You can still "balance" regular bananas in the ends but sometimes they pop out and can sometimes cause serendipitous events. However the whole "squishing" thing brings the immediacy of the CQ1 back to the CQ2. Playing it this way will change your life. Also, using audio rate signals on the Flip and Skip inputs will unchain the demons that live in that little wooden box and help transform it into the Transdimensional Portal Key that it truly is. Have fun!
that is the most in depth, thorough tutorial on the cocoquantus- bravo! it may turn out to be the definitive one! i really dug your use of the envelope follower. i never thought to record CV and reuse. very creative patching. i’d love to see you do this with all the CL instruments 🙏😀
Let this be the THE cocoquantus deepdive. Sure, we can read the "manual" diagrams, but your recordings and live labeling have helped me far more than any literature. Bravo!
Don’t know! I just ordered a bunch from mouser and digikey cus I had no idea how to order switch caps, actually had to trim these down to fit. I sound just get the smallest ones, these are still slightly big.
i don't really understand what is a mono piezo input which is the minijack on the left. Can it be possible to plug any mono audio signal in this input (like a mono synth)? the music ending the video is good !
I’m using my roommates Samson C02 going into a behringer tube mic pre, he’s uses them to record his overheads but worked well for me here so.. I know nothing about microphones lol.
![โฮ่ง! (SUGOI) - LYKN [ OFFICIAL MV ]](http://i.ytimg.com/vi/nFp4zjAARFs/mqdefault.jpg)
Not a bad explanation, however, the green inputs are for switching which oscillator is the modifying source for each of the oscillators, with the indicators functioning as follows: the red and yellow lights are indicators counting counter-clockwise, with no light being directly adjacent, yellow next, then red, then both. The blue lights indicate that instead of the source functioning as a trigger for S/H functions, the positive swing invokes an S/H function and the negative swing invokes a tracking of the carrier so you get a Track-and-Hold output when the blue light is on. Hope this helps make sense of things.
Awesome! Thanks for the clarification! Couldn’t find that info anywhere.
@@FemiFleming Pugix is truly a master of this device. I'd call it an instrument but it is so much more than that.
One thing I would STRONGLY recommend is getting your hands on 3.5mm banana ends and drop the male ends into at least the Quantussy sockets then start bridging connections with your fingers. You can still "balance" regular bananas in the ends but sometimes they pop out and can sometimes cause serendipitous events. However the whole "squishing" thing brings the immediacy of the CQ1 back to the CQ2. Playing it this way will change your life.
Also, using audio rate signals on the Flip and Skip inputs will unchain the demons that live in that little wooden box and help transform it into the Transdimensional Portal Key that it truly is. Have fun!
what language is this :)
that is the most in depth, thorough tutorial on the cocoquantus- bravo! it may turn out to be the definitive one! i really dug your use of the envelope follower. i never thought to record CV and reuse. very creative patching. i’d love to see you do this with all the CL instruments 🙏😀
Let this be the THE cocoquantus deepdive. Sure, we can read the "manual" diagrams, but your recordings and live labeling have helped me far more than any literature. Bravo!
Thank you so much for making this! This video is so helpful!! ☺️🎶
Femi, thank you for sharing all of this info. Picked up a Coco2 last week and this video was extremely helpful.
Thanks!! Hope you fall in love with it like i did
Why did I never think of recording CV with my Coco? This is an excellent video that gives me loads of ideas. Thank you!
Oh my gosh… So much tips and tricks… Super démo. Love the pairing with the resonator. Thanks for this
Thank you for making and sharing this! Really helpful information and awesome ideas!
Crackin’ the code! Well done.
Great tutorial! X some really creative ideas
yes ! yes ! yes !
Are you inputting coco into wingie or using mic input of the wingie ? Love it !
Imputing coco into wingie, wingie input switch is set to line input. Thanks!
@@FemiFleming so cool 👌 great stuff
Great video! Love those switch caps, too. What size are they?
Don’t know! I just ordered a bunch from mouser and digikey cus I had no idea how to order switch caps, actually had to trim these down to fit. I sound just get the smallest ones, these are still slightly big.
i don't really understand what is a mono piezo input which is the minijack on the left. Can it be possible to plug any mono audio signal in this input (like a mono synth)? the music ending the video is good !
Yes! You can plug any mono or stereo signal into that jack and it will come out of the banana jack in mono. You can plug a mono synth into that jack.
¡Thanks for the video!
I plug my mic and I only listen the dry sound, the delay is no working, any suggestion?
What mic are you using? I've been trying a shitty Behringer one (my fault, I know) and it's overdriving to all hell...
I’m using my roommates Samson C02 going into a behringer tube mic pre, he’s uses them to record his overheads but worked well for me here so.. I know nothing about microphones lol.
Did anyone dieded?