this is the second video i see from you. I like the observations you make about why the paint failed. Keep practicing the polishing. I usually tell my students, the thing you don't like doing is the thing you should learn the best. So if they dont like polishing, I encourage them to learn it better.
Man brother your video is great. It has tons of information and the fact that you break down everything makes it easy to understand for a newbie like me who is interested in this field . Thanks for such an informational video brother keep them coming.
I do Collision Repair for a living and so many shops will NOT paint a bumper. Ill do it on the side, and have a similar process as what you did. Yes most definitely read your TDS. You can save some money on the scuff paste and just use some commet cleaning stuff from the bathroom. It'll also clean it at the same time.
Great job. You motivated me from the first videos, to start stripping down my '93 Flareside. Engine, trans, frame. The only mistake I can see was the pronunciation. It is pronounced Pasagetdowndena. I grew up on Main and Jackson many moons ago, right across from the old Jackson intermediate. Boy doing global award winning paint jobs in the backyard.
Keeping budget in mind a few cans of self etching primer on the rear bumper would help promote paint adhesion since it EP isn’t meant to be painted directly onto
Truck came out clean asf CUH😩 🔥you inspired me to paint my own 1987 cutlass, I’m getting everything you recommend little by little, each pay check Also, keep it the work, your editing and video quality is going crazy I live close to Pasadena so, hope to see you riding around in the obs (catch me in the cutlass)
And that's how we all learn to do stuff, Damn I love TH-cam, your truck, your Girl, Your Beautiful paint job, my Sir. My Hats off to you, Well done.........................👍
I’m glad you used adhesion promoter. But anything that was plastic or “ready to paint” stuff that you just scuffed should’ve been primer sealed. Sealer doesn’t only help with basecoat coverage, it helps adhesion of topcoats. It’s also good insurance to lock down any body work that could’ve been underneath like on the rear bumper. I personally would’ve used sealer on everything. Another thing I’d like to point out is that I personally would’ve used 2k primer surfacer over your body work on the rear bumper. Some epoxy primers are meant to go over bare metal and bare metal only. That epoxy you used doesn’t have the build a primer surfacer would’ve and as time goes on I bet the body work will map out through the paint. Epoxy over bare metal, scuff wherever you’re gonna used body filler. Apply body filler to all the low spots. Block it all out, if you have small areas that went to bare metal you can use some self etching primer, and then spray 2k primer surfacer. 3 good coats gives you plenty of material to get rid of small waves in body work. I would block out with 320/400, then run a da sander with a soft interface pad and 600 over everything real quick. 400 grit is too aggressive in my opinion if you’re going straight into paint. Sealer will cover 320/400 but If you’re gonna skip sealer, go to 600 on solid colors 800 on metallics. This will prevent sand scratch swelling in the future. Good luck man, fellow paint guy here. You’ll be a beast in a year or 2 more of doing it
Amazing content and such little subscribers you deserve more. Similar techniques are done in aersospace for painting and structural bonding. Surface prep surface prep surface prep
I just ran a crossed your channel, The truck looks awesome. What a great color. I'm getting ready to paint my 1996 Harley Road king. That's every bit of a $3500.00 paint job. I live in the Great state of Texas also. West Texas. Are you buying your paint's, apoxy, etc on line? Great video man.
Super great job !! 👏👍I m going to bring , my 1997 silverado to you ; I wish you leave close . Disassembly of separate parts is the way to do it , auto shops , charge a lot for slappy quick shity work . Because they do flat rate bullshit they charge way a lot for shity work ; plus they only do insurance work . Way to do it bro !!! Congratullations !!!
After you sand a mess up like that spray it with wax and grease to check it. I’ve had plenty of times where I thought it was feathered out enough and it wasn’t.
Id pay double for my single cab no 2 tone. It does need some body work on the cab corner. Maybe if it was just a respray, if it needs body work id say charge more
I got a rear bumper ready to paint but it did come with a small dent. I am going to go head and add filler. Would I have to sand the surrounding area to bare metal and then add my bondo? And sand it smooth and add primer?
this is the second video i see from you. I like the observations you make about why the paint failed. Keep practicing the polishing. I usually tell my students, the thing you don't like doing is the thing you should learn the best. So if they dont like polishing, I encourage them to learn it better.
Thanks for the advice bro! I’ll definitely keep practicing and improve my technique!
Yes, it’s worth the $900, and then some.
Thank you bro 🤙🤙
Brother how much for a paint job? Been trying to reach you.
@@nextcoatdo u take customers. I’ve got a 90’s 2 door Tahoe I want to paint black it’s currently red
Great video! Learned a lot. Gonna apply some of this to my tundra project soon.
Man brother your video is great. It has tons of information and the fact that you break down everything makes it easy to understand for a newbie like me who is interested in this field . Thanks for such an informational video brother keep them coming.
Appreciate the love bro! Let’s get it!!🤙🤙🤙
@@nextcoathow much would you charge for a paint job on a 2005 Silverado crew cab been trying to reach you lmk..
You can sand your basecoat to get rid of bits of trash if needed. let the basecoat dry appropriately given whatever temps your area may have.
Glad your channel popped up on me list. Well worth the time and money you invested. Looks awesome 👏
I do Collision Repair for a living and so many shops will NOT paint a bumper. Ill do it on the side, and have a similar process as what you did. Yes most definitely read your TDS. You can save some money on the scuff paste and just use some commet cleaning stuff from the bathroom. It'll also clean it at the same time.
Great job. You motivated me from the first videos, to start stripping down my '93 Flareside. Engine, trans, frame. The only mistake I can see was the pronunciation. It is pronounced Pasagetdowndena. I grew up on Main and Jackson many moons ago, right across from the old Jackson intermediate. Boy doing global award winning paint jobs in the backyard.
That’s amazing🤩 and being your 2nd truck makes it even better..
Good feelin having a skill nobody can take that’ll feed the kids n all dat🫡
Keeping budget in mind a few cans of self etching primer on the rear bumper would help promote paint adhesion since it EP isn’t meant to be painted directly onto
Truck came out clean asf CUH😩 🔥you inspired me to paint my own 1987 cutlass, I’m getting everything you recommend little by little, each pay check
Also, keep it the work, your editing and video quality is going crazy
I live close to Pasadena so, hope to see you riding around in the obs (catch me in the cutlass)
Shhhesh that’s cool bro! I hope the project comes out clean 🧼 I’ll keep a lookout for the cutlass 🤙
And that's how we all learn to do stuff, Damn I love TH-cam, your truck, your Girl, Your Beautiful paint job, my Sir. My Hats off to you, Well done.........................👍
I agree, that's a killer paint job and it's worth more than$900. Great video.
The OBS is my favorite body style GM truck. Always wanted one growing up and finally got one a while back. Nice paint job man.
Yes! Such a clean year. Thank you!
I’m glad you used adhesion promoter. But anything that was plastic or “ready to paint” stuff that you just scuffed should’ve been primer sealed. Sealer doesn’t only help with basecoat coverage, it helps adhesion of topcoats. It’s also good insurance to lock down any body work that could’ve been underneath like on the rear bumper. I personally would’ve used sealer on everything. Another thing I’d like to point out is that I personally would’ve used 2k primer surfacer over your body work on the rear bumper. Some epoxy primers are meant to go over bare metal and bare metal only. That epoxy you used doesn’t have the build a primer surfacer would’ve and as time goes on I bet the body work will map out through the paint. Epoxy over bare metal, scuff wherever you’re gonna used body filler. Apply body filler to all the low spots. Block it all out, if you have small areas that went to bare metal you can use some self etching primer, and then spray 2k primer surfacer. 3 good coats gives you plenty of material to get rid of small waves in body work. I would block out with 320/400, then run a da sander with a soft interface pad and 600 over everything real quick. 400 grit is too aggressive in my opinion if you’re going straight into paint. Sealer will cover 320/400 but If you’re gonna skip sealer, go to 600 on solid colors 800 on metallics. This will prevent sand scratch swelling in the future. Good luck man, fellow paint guy here. You’ll be a beast in a year or 2 more of doing it
Fire video!! About to paint my first car soon and I’m hoping the flake comes out as clean as yours!
Great job brother... What is the paint code of the "Bronze Metallic" base coat you used?? Killer colour.............Keep up the great work...
The paint job came out sick bro🔥, I enjoy watching your videos mann, you motivate me to try and paint my own truck keep them videos coming!!
Amazing content and such little subscribers you deserve more. Similar techniques are done in aersospace for painting and structural bonding. Surface prep surface prep surface prep
so informative and easy to keep along. Do you have a video on setting up compressor and all fittings needed?
Thank you bro. I appreciate that 🤙
I'm a cuh, and I approve this message.
Great video bro the quality keeps improving in each one.
Thanks cuhhh 🤙🤙🤙
I just ran a crossed your channel, The truck looks awesome. What a great color. I'm getting ready to paint my 1996 Harley Road king. That's every bit of a $3500.00 paint job. I live in the Great state of Texas also. West Texas. Are you buying your paint's, apoxy, etc on line? Great video man.
Dammit boi! Clean AF homie! 🙌🏼
Nice bro !!! Definitely worth it !!!
So happy this video came across my feed! gonna binge watch your channel and build my painting confidence lol
You got this bro 🤙
Aye bro you definitely stepping your game up. Keep up the good work
Thank you bro🤙 I appreciate that!
Fantastic job!
Looks great..and great content. Thanks for posting! ✌️
Thanks for watching!
On point love watching your videos awesome work 👍
Looks good man I’m liking the channel this is the first video I’ve watched
I just scrolled past this video I live close by I have an 02 gmc that I’m in process of fixing the dump truck 👌🏽
looks amazing, id install some aftermarket lights next
nice work! wished i lived near there, i need my 4 door F150 painted lol
It’s all in the skills man. If you got the skills you can make anything look good
You did a great job.
Thank you 🙏
the dedication is real, respect the grind, that came out sick af
Super impressed brother.
Great job brotha!! You’re giving me inspiration to start painting my obs with my 4 little ones.
Oh yea cuh I started the same way in the backyard w the harbor freight tent I have a big shop now keep it up 🎉
Great video, awesome paint job my dude.
Bro u did a great job 👏 👍
Looks good I would pay that if I needed it
It looks bada$& bro id pay the 900 for that came out super clean bro
Nice job bro how do you do your billing by the hour
Super great job !! 👏👍I m going to bring , my 1997 silverado to you ; I wish you leave close .
Disassembly of separate parts is the way to do it , auto shops , charge a lot for slappy quick shity work .
Because they do flat rate bullshit they charge way a lot for shity work ; plus they only do insurance work .
Way to do it bro !!! Congratullations !!!
After you sand a mess up like that spray it with wax and grease to check it. I’ve had plenty of times where I thought it was feathered out enough and it wasn’t.
Great job g it 900 x2 what I think when in done
Id pay double for my single cab no 2 tone. It does need some body work on the cab corner. Maybe if it was just a respray, if it needs body work id say charge more
Your super inspiring man love the content I know this kind of work takes a lot of time to do great job and keep up the good work brother god bless
I fuck with that color bro. I'd say most definitely worth that.
I got a rear bumper ready to paint but it did come with a small dent. I am going to go head and add filler. Would I have to sand the surrounding area to bare metal and then add my bondo? And sand it smooth and add primer?
Looks sick dude I'd pay a grand for a paint job but I'm not in TX. 🤘🏼keep up the progress on the truck bro 🫡🔥🔥🔥
Worth much more brother! Don't under sell yourself. Side note when can I take you my car lol
bad ass skills bro, make a tutorial for us on the equipment and materials!!!
Man I have a 91 obs currently coated in 2k white primer I wish you lived close to Dallas I would straight send my ride over to you!
I do medium wet coats all the way unless I think it might have a reaction.
I been buying my auto body tools for awhile. If it breaks i can get a replacement from them the same day.
Good job bro looks great. Question did you spray victory red on that obs? Saludos from Oregon 🌲
Saludos 🤙 and yes, it was victory red
@ thanks bro!
Where are you located? I’m on the way! 😎 I need to Chevys painted! Great work!
Looks good. Brother
Thank you 🤙
Looks clean
Mane you’re funny & entertaining I’m subscribing Puro Trokiando Cuhh 🤙🏼
Great job bro💪💪💪💪💪
Thanks bro 🤙
What is the little plastic bag looking thing in the paint cup called?
Love the color
Great job bro👊🏽
Ahh yeah definitely clean 👌🏻
Where do you buy your paint? Good video.
Truck looks beautiful what color is that
You in Cali my boy need a obs tahoe done lmk
After spraying, did you have to wet sand ? The outcome was awesome
Would you use adhesion promoter on the front bumper too ?
No, only plastics🤙
What name brand paint did you use? BTW following you from NC. Looking good bro! Nice work.
I love how well that came out, is that color called anthracite gray? I
Keep it up carnal 💯💯💯
I Need some work done 🔥
Where you at I need a paint job in my truck I'm in Houston
Yeah thats a good price…came out nice..
🔒’d IN!!!!
I need to paint my crown vic cuhhh
shi lookin clean. ngl i would buy, my obs need paint
What motor is in that?
I see you like doing the obs truck how much to do mines I like you work pretty clean
I have a 1993 obs ford I want you to paint
No adhesion promoter on the grill?🤔
Yes. Definitely need it for the grill since it’s plastic
I got an obs primed up. Ready for a paint job. Wassup with it bro
Where did you get the paint and what the color number or name? , because for $250 it’s good price
Looking good
Man I’d pay you for a paint job that’s for sure 😂
Thanks bro 😎
What’s the color code? I want to respray my Land Cruiser but can’t decide on a color
just saw you on ig and tiktok!! keep it up bro amazing work
Thank you bro 🤙🤙🤙
I live in Houston would you paint my 04 step side?
@nextcoat how much do you charge to paint a Toyota Tacoma hood that’s brand new still in the box, paint color is magnetic grey metallic/ig3
Bro you can use my truck for one of your vids 😏
It came out dope! 🤙🏽 keep it up.
Color code my boy? great Job bro!
Mamalon el jale bro !
Oh Pasadena tx man I’ll bring my car to ya how much for body wrk an paint I’ll buy all my material or whatever I need to do so
The girlfriend and the wife lmao
What is the ain’t color
Does the pait use harder
Paint mine next bro ..