TRANSFORMING A GARAGE INTO A ROOM INCLUDING LINTEL INTERNAL LINTEL
ฝัง
- เผยแพร่เมื่อ 23 ต.ค. 2024
- THIS VIDEO SHOWS ME AND AL REMOVING THE GARAGE DOOR , TOOTHING OUT THE PILLARS WITH A 9" GRINDER AND DRILL THEN WE BUILD THE BLOCKWORK AND BRICKWORK . WE ALSO INSTALLED A CAVITY TRAY, TIES ,DPC,SCREW IN TIES , INSULATION, AIR BRICKS AND AN IMITATION STONE CILL IN 2 HALVES.
WE SHOW THE WINDOW BEING FITTED ANS ALSO SHOW US CUTTING OUT A DOOR AND INSTALLATION 2X 4X3 ANGLE IRONS...ENJOY
#BRICKLAYING #CONSTRUCTION #GARAGECONVERSION #FATHERANDSON
Business only contact
Email - kennedy.steven130@gmail.com
Instagram - @steve_and_alex_bricklaying
Can't thank you both enough, we're really pleased with how it's turned out. Well done lads 👍🏼
Cheers Kev , glad you like it 👌🏼🧱👍🏽
Tell you what lads did a really nice job there i bet the customer was over the moon 🌙 what A transformation 👌👏
Yeah they were chuffed and love seeing it up on TH-cam too 🤓👌🏼🧱👍🏽
The music with the light love .. nice job there guys 👌
Cheers John 🧱👍🏼
Good job there lads .Nice brickwork, good colour match, its going to look A+ when its finished.
Thanks Gino 💪🏼🧱👍🏽
Excellent work chaps...👍.
Cheers Barney 🧱👍🏽
Top job Steve n Alex , Good bit of extra space gained , Grafters .
Thanks pal , it will make a cracking room 👌🏼🧱👍🏼
Boys.... amazing as always. Awesome watch that was!
Thanks a lot Rob 🧱👍🏽
Beaut of a job, its solid like a rock ,well done boys .
Cheers Dan pal 🧱👍🏽
True professionals 😀👌👍👍
Thanks very much Peter 🧱👍🏽
As always, a brilliant job from Garry in Barnsley
Thanks Garry 🤜🏽🤛🏽🧱👍🏽
Hi Lads, just to help you., I bought an Arbortech saw. Its brilliant. Cuts saw action 80% less dust than a whizzer. Expensive. But saves time.. use it for all situations. . Also I noticed your breathing heavy.please make sure you have a good break, holiday, even health Spa when u can.. YOU DESERVE IT MATE ! Massage, jacuzzi etc. From an x Brickie
Cheers 😉🧱👍🏽
Use white cement mixed with building sand to point up a sill like that and it shall blend right in , all the best , great job as always .
Cheers Oliver 🧱👍🏽
This was absolutely brilliant I’m doing exactly the same to my own garage in the summer.
Can you brick direct onto the slab even if you’re not sure if there’s a footing there or not?
No you need to be sure the floor is strong enough 🧱👍🏽
@@SteveAndAlexBuild ok thanks 🙏
Another fab job well done lads
Top builders
Thanks pal 😁🧱👍🏽
That turned out really good. Looked like you was cheerleading in front of the window at the end, go team🤸♂️
🤣🤣🧱👍🏽
loved the finish
Thanks pal 🧱👍🏽
Great intro. Good video. Brick look great. Neat and clean job!!!!
Cheers Richard, made up with the logo 🧱👍🏽👌🏼
Nicely done lads 🧱🧱🤙🏼
Thanks Nick 🧱👍🏽
A great job lads, looks good,
Cheers Michael 👌🏼🧱👍🏼
As much as I love a garage, it just looks so much better now. Top graft as always lads.
It makes a cracking living space. 🧱👍🏽
Reciprocating saw brilliant for cutting doors in thermo block mate 👍👍
Would have been handy in this one 🙄🧱👍🏽
Nice neat job that lads when done right these little garage conversions can add a belting room to a house. Forgive me if you cover this as I've only watched up to the halfway point but it would realy smarten the look of the front of the house if the existing cills got a clean up and possibly painted to look fresh and new again it would be a nice little Saturday morning job far ya.
Painting ! Oh no I hate painting 😂🧱👍🏽
Good days work lads 👌🏼
Cheers Charlie 🧱👍🏽
I appreciate the care you take in matching up to the existing build. It looks just like part of the existing fabric.
Cheers David its always a relief to get a good match 🧱👍🏽
Looking solid !! Nice dpc there 👌🏻... it’s good to have some shelter in this piss weather .. stay safe guys enjoy the weekend don’t forget to take a break 😄✌🏻🙏🏼
Thanks Jay . Your under selling yourself on the channel name it should be .. Jay puyenbroek master craftsman 👌🏼🧱👍🏽💪🏼
@@SteveAndAlexBuild thanks a lot 🙏☺
@@JayKTS 👌🏼🧱👍🏽
Another cracking job lads, and a nice little touch just on 7 minutes where Alex gives his dad a little cuddle! Brilliant!
Cheers Garry 😁🧱👍🏽
I can tell you are in England when the sensor light comes on during the day. Cheers from Oz
😆 yep correct . Hello over in oz 🤚🏾👍🏽🧱
Excellent job top team awesome thanks 🇬🇧🇬🇧🇬🇧
Nice one Phil 🧱👍🏼
Really nice job love your tutorials 👏👌👍
Cheers Malc 👌🏼🧱👍🏽
great work, do you cover Burton upon Trent area?
Cheers!
Sorry we don’t unfortunately 😬🧱👍🏽
Hefty blockwork lad. Whoever designed that was on a mission to make sure it didn't fall down.
💪🏽🤣🤣🤣🧱👍🏽
Great job.
Cheers Lee 🧱👍🏽
Good tidy job lads like the new logo great design👍
Cheers pal , we are made up with the logo , it’s going on the van 👌🏼🧱👍🏼
Nice tidy job boys...Sure makes the house look nice!
Cheers Woody , makes a great room too 👌🏼🧱👍🏼
@@SteveAndAlexBuild Nice snug for that morning coffee.....
@@woody9052 ☕️🧱👍🏼
Good job guys !!
Cheers Joe 🧱👍🏽
Very nice. What blade did you have on the multi tool. I cut those blocks well.
Hi Michael , just a multi purpose blade but the blocks are very lightweight and soft ..... fu of air bubbles 💪🏼🧱👍🏽
Looks very well lads.
Cheers 🧱👍🏽
Looks well that does, be even better once mortar's all dry. 👍
Thanks Ade 🧱👍🏽
Correct me I’m wrong, but don’t you need to dig a footing to comply with building regs???
No as long as the slab in minimum 150 mm thick , reinforced and a Dpm underneath which are all standard practice now , plus these garages are built soils across the door openings so everything is sat on a wall anyway 💪🏼🧱👍🏽
@@SteveAndAlexBuild ah okay mate, keep up the good work👍🙏🏻
@@zakshuker220 . Thanks for watching and commenting pal 🧱👍🏽
Great job. You'd never know it was a garage. At 23:11 I thought your were building a grave stone 🤣
Thanks Wayne 🤣🤣🧱👍🏽
great job lads
Thanks Gaz 🧱👍🏽
Love the new logo - looks pukka!
Cheers Matt , yeah we are made up with mate 🧱👍🏼
What did you use to cut the frame ties when you removed the garage frame.
Nothing was cut , it held in by 3 bolts each side Nice and simple 👌🏼🧱👍🏽
That was a brilliant way of taking the garage door off. I bricked a garage door up a few years ago and nearly killed myself removing the door. The spring shot off just missed me......phew
Those old doors were death traps , these new ones are much safer 👌🏼🧱👍🏽
A bit late to the party here but, is there any requirement to do anything with the floor slab - insulate? And are building regs generally needed to convert a garage into a habitable room?
Building regs are required but we always convert our garages to regs standards .
The floor has a floating timber floor put in with 100 mm celotex insulation in it .👌🏼🧱👍🏽
Nice dance moves mate! 😉 36:47
🙄😬😂😂🕺🏽🧱👍🏼
Did building regs sign off using angle iron and why no fire door into house?
Yes they did and why would they refs fire door 🚪? It’s not a garage anymore so no fire risk 🤷🏼♂️
Thanks, I’m not a builder was just asking. Great work BTW 👍
@razor66 . Cheers pal 👍🏽🧱
All garages should get the same treatment...don’t about others, but never put a car in one, only ever used for ‘storage’...mind you, most garage nowadays, unless they’re double garages, don’t fit today’s cars...unless the doors slide open, and even then it’s a pretty tight fit. Though the plastic air bricks might be a bit low to the concrete block paving at the front, are they going to take out some of the blocks there?
Unfortunately the groundwork’s put the slab in level so it’s 75 mm too high at the front . We should have 150mm to damp .
On the plus side the drive is at the top of a slope and if any water does ever get in the floor is suspended so there is a void underneath 👌🏼🧱👍🏽
good job lads
Thanks pal 🧱👍🏽
Steve, when you do a job like this do you only take on the brickwork or the whole contract
We only do the brickwork, door cut out and lintels 👍🏽
@@SteveAndAlexBuild that's what I thought, best way work to your strengths🧱👍
@@markanderson6969 Exactly 👌🏼🧱👍🏽
Cracking job fellas, watch out for rusty balls in that rain 🤦🏻♂️🤷🏻♂️😂🧱🧱👍👍
😂🧱👍🏼cheers Ricky
Looks good not many people use there garage to park in nowadays much better use of space.
You could get the car in but you’ll struggle to get out of it 😳😂🧱👍🏽
@@SteveAndAlexBuild bits of carpet screwed to the wall as door protection not worth the hassle. 👍
@@grahamdalzell6933 👌🏼🧱👍🏽
@@grahamdalzell6933 😁🧱👍🏽
whats the weight on those blocks they sound light compared to our 8 x 8 x 16
No idea pal 😬🧱👍🏽
The jobs a good one 👍😀👍
Cheers Baz 🧱👍🏽
Real trade skills as ever if only all brickie's were as good
Thanks very much 🧱👍🏽
Hi just curious were the air brick needed.?
Just there to vent the void under the timber floor 👌🏼🧱👍🏼
@@SteveAndAlexBuild ok thanks. It looked like a solid concrete floor. Good match on the brick.
@@Oncewasdonka . Cheers pal yeah in the words of Fergal Sharky “ a good match these days is hard to find “ (almost ) 😆🧱👍🏽
@@SteveAndAlexBuild It's 1985 all over again
@@woody9052 That’s when I stated in this trade 😁🧱👍🏽
Steve .Alex.
Amanhã às 20.30.horário do Brasil
Vamos fazer uma live
Em comemoração aos 100 mil inscritos...ficaria feliz em ver vocês no chat.
Um abraço
🧱👍🏼😁
Why did you not use a old handsaw or block saw to cut that last block seemed had work the way you did it,nice bit of brake dancing at the end😂🤣😂🤣😂🤣
My arm couldn’t take any more cutting I was friggin knackered 😳. 200 mm block ain’t fun 🤯🤣🧱👍🏽🕺🏽🕺🏽🕺🏽
@@SteveAndAlexBuild it's only thermerlite give me a shout next time don't mind helping out👍
@@anthonyworthington6495 🤣💪🏼🧱👍🏽
Another great job guys, them cills can be a nightmare to try and get straight!! Do I see a nice new radio aswell👀👍🏽
Yeah those villa can be a pain . As for the radio we’ve had it since June , it’s a belter 👌🏼🧱👍🏽
@@SteveAndAlexBuild can’t beat the Makita radios, I’ve got all Milwaukee 18v kit but a makita radio, pain in the arse!!
😬🤣👍🏽🧱
Super legal
🧱👍🏽
2 angle irons ? Over door ?
No pad stones should this not be concrete lintel ? There is brickwork above.
You don’t put padstones under lintels .
@@SteveAndAlexBuild slate back in my day . Very dense material .
What about lintel ? Angle iron that i find questionable .
@@idontthinkso2058 They are more than capable for the job 🧱👍🏽
Great work Alex and Steve 👍
Question please - What’s the purpose of the wide black (DPM/DPC?) tray from the inner to the lower, outer, brickwork and would it be there if the stone mantel wasn’t present? (I’m not a builder). Many thanks.
It’s a cavity tray , the same as you see above lintels on houses . It’s a long winded explanation, but it’s there mainly because building control want it in 🧱👍🏼
@@SteveAndAlexBuild Many thanks for the swift response. Would the tray still have to go in even if the stone cill wasn’t present? Many thanks in advance.
@@MrJohnnynapalm7 Yes pal it would 🧱👍🏽
@@SteveAndAlexBuild - Thank you for clarifying. Keep up the good work 👌👍
@@MrJohnnynapalm7 💪🏼🧱👍🏽
Lol covered up the door number but it's on the bins. Great vid as usual, keep em coming
Ah what a muppet ! 😬, cheers Tony 🧱👍🏼
Hiya boys, tip top job once again 👏 👍
Come on Steve spend some money 💰 😉, you need a Sawzall with an Irwin masonary blade - go straight through those thermalite's - save you so much time mate 👍
Hope you have a great weekend boys 👍
Regards
Tim
A what ? 🤔😁🧱👍🏽
@@SteveAndAlexBuild Sawzall - it's the Milwaukee brand name for a reciprocating saw. Any reciprocating saw will do (even mains) its the Irvine masonary blade that's the important bit. Those blades aren't cheap (about £30l but last forever & will plunge cut really easily 👍😁
@@timmargereson332 . I am scared of those things , 🥺🧱👍🏽
I bet your neiboughs love you with that squeeky door
😏🧱👍🏽
That bloody door noisy but great work
🤣🤣👍🏽🧱
Ps that outside light is flashing In time with the music 🤣🍻
😁😁🧱👍🏽
Ground level airbrick? Really?
They have to vent the floor and we only have 1 course to damp. Can’t put periscope vents in because of the cavity tray . Luckily the drive slopes away .🧱👍🏽
Those trainers are a no no, asking for an accident.
🧱👍🏽
Am surprised the putting in window ,fitters dont disturb the brick work
The stone cill spreads the weight of the window plus Jeff and Kyle are very good fitters 👌🏼🧱👍🏼
What garage door??, I don’t see one🤣🤣
😏🧱👍🏽
where is his working boots
Drying inside the garage , they were soaked. 🧱👍🏽
he is a young guy with years of work ahead just a thought loved the video but you had your boots on eh
@@scotspie501douglas7 . Thanks , mine weren’t wet 🧱👍🏽
You hide the address on the house but miss the address on the bins. D'oh.
Yup 🙄
that really annoys me about builders how is the blocks going outside through the new window
Not sure what you mean pal 🤔👍🏼🧱
you had a new window in and if you bang those blocks of the window would you own up
I think its a builders thing and its not your house its a job thats what I mean
you done a good neat job but I think the window should have been last in after the blocks were in your van
@@scotspie501douglas7 . Things don’t always work out to plan . As for the blocks it was the customer passing them through the window 🧱👍🏽
all the dust airbourne now
Yes that is correct , you try cutting out a door without making dust 🙄
would it not be better to take them out before the window went in
Yes it would but for the fact the door was cut out after the window went in
lol flinging a block under a lead lol
What does that even mean? 🤷🏽♂️........lol