When Megear installs his DIY jig, he reinstalls the end cap. This is a critical step. The cylindrical axle is made of soft metal and will collapse or deform without the end cap installed. Also, if you do not have a DIY jig, you can use a 14 mm open end wrench and tighten the end cap onto the wrench jaws.
Yeah, just damaged my Zonda wheel few mins ago due to the soft material. Shame I haven’t watched this video before. Lesson learned.I hope my local workshop will be able to replace the damaged part. 😱
Por favor, serías tan amable de indicarme, ¿Donde poder comprar, esta pieza que fija el Eje para poder desatornillar la otra parte del buje???? Por favor
Because there are no 1:18 squares, I used a movable wrench to remove the axis, and the teeth were a bit slippery. Is there any way to solve it? Thank you.
Hi. Great video. What are you using as degreaser. Looks effective. Great application bottle. Did you make the tool / jig, for holding the flats on the aluminium hub yourself. Looks very accurate. Top work indeed.
I would do it off the bike, the tension caused by a tight qr skewer may cause extra stress on the fine threads/soft aluminium. What is more important is that you recheck the bearing adjustment after a few hours riding. I've had lots of Fulcrum wheels, the hub bearings always seem to loosen off after a rebuild, if not adjusted the bearings & hub will suffer.
have you ever fully replaced the bearing kit, inner race etc?? how does the inner race be removed? it looks like it would break of you try to tap it out
1. I never try degreaser liquid before. 2. WD40 is frentely for many parts such as seal, rubber and all bicycle parts metals. but degreaser liquid not sure (depend on each brand) anyway if you decide to use it please be sure there is no any side effect to all that parts mentioned.
Bring the jig drawing according to below link (last page) to the machine shop. www.google.co.th/url?sa=t&rct=j&q=&esrc=s&source=web&cd=18&cad=rja&uact=8&ved=2ahUKEwi68M7LhproAhVW_XMBHWKhAOIQFjARegQIAxAB&url=https%3A%2F%2Fwww.facebook.com%2Fmegear.bikerepair%2Fposts%2F%25E0%25B8%2595%25E0%25B8%25B1%25E0%25B9%2589%25E0%25B8%2587%25E0%25B9%2580%25E0%25B9%2580%25E0%25B8%2595%25E0%25B9%2588%25E0%25B8%25AD%25E0%25B8%25AD%25E0%25B8%2581%25E0%25B9%2580%25E0%25B9%2580%25E0%25B8%259A%25E0%25B8%259A-jig-%25E0%25B8%2595%25E0%25B8%25B1%25E0%25B8%25A7%25E0%25B8%2599%25E0%25B8%25B5%25E0%25B9%2589%25E0%25B8%25A1%25E0%25B8%25B2%25E0%25B9%2583%25E0%25B8%258A%25E0%25B9%2589%25E0%25B8%2581%25E0%25B8%25B1%25E0%25B8%259A%25E0%25B8%2587%25E0%25B8%25B2%25E0%25B8%2599-service-%25E0%25B8%2594%25E0%25B8%25B8%25E0%25B8%25A1%25E0%25B8%25A5%25E0%25B9%2589%25E0%25B8%25AD%25E0%25B8%25AB%25E0%25B8%2599%25E0%25B9%2589%25E0%25B8%25B2%25E0%25B8%2582%25E0%25B8%25AD%25E0%25B8%2587%25E0%25B8%2597%25E0%25B8%25B1%25E0%25B9%2589%25E0%25B8%2587-campagnolo-shama%2F830557673769488%2F&usg=AOvVaw2-_BQZftD2Z1XE7Sv9pxeS
When Megear installs his DIY jig, he reinstalls the end cap. This is a critical step. The cylindrical axle is made of soft metal and will collapse or deform without the end cap installed. Also, if you do not have a DIY jig, you can use a 14 mm open end wrench and tighten the end cap onto the wrench jaws.
at 1:24 right?
@@ciscometal Yes.
damn. Vital tip here, thanks for pointing this out.
Yeah, just damaged my Zonda wheel few mins ago due to the soft material. Shame I haven’t watched this video before. Lesson learned.I hope my local workshop will be able to replace the damaged part. 😱
Really informative vlog, thank you.
Thanks a lot. Bike shop told me the hub is beyond repair, after following your tutorial it's now as smooth as ever
Complimenti, mecánico muy professionale e apasiona to per questo lavoro
I wish I could find someone like you to sevice my wheel hubs...
VIVA TÚ!!!!!! Acabas de darme la solución. Muchísimas gracias
Awesome video, been looking for this for a while. Thanks a lot !
Trabajo impecable 👍👏
Great video! Thanks.
Por favor, serías tan amable de indicarme, ¿Donde poder comprar, esta pieza que fija el Eje para poder desatornillar la otra parte del buje????
Por favor
Because there are no 1:18 squares, I used a movable wrench to remove the axis, and the teeth were a bit slippery. Is there any way to solve it? Thank you.
Hi. Great video. What are you using as degreaser. Looks effective. Great application bottle.
Did you make the tool / jig, for holding the flats on the aluminium hub yourself. Looks very accurate. Top work indeed.
I use WD40 for degreaser and yes I did the DIY tool by myself.
I have older shamals with silver end caps. There is no squared off silver nut to allow use of a straight edged jig.
Yes you are right. The old one no need to use any special or DIY jig.
thanks
Is it good to put the wheel on the bike (with closed QR) before adjusting the preload and tightening the locking screw?
I would do it off the bike, the tension caused by a tight qr skewer may cause extra stress on the fine threads/soft aluminium. What is more important is that you recheck the bearing adjustment after a few hours riding. I've had lots of Fulcrum wheels, the hub bearings always seem to loosen off after a rebuild, if not adjusted the bearings & hub will suffer.
この動画のすごいところは、USBにCompyグリスを取ってDura グリスを使っているところです。グリスは固くてもそこから滲み出るOilが摩擦部を潤滑してくれるのだから、これで正解です。morganグリスもわたしは愛用していますが。
have you ever fully replaced the bearing kit, inner race etc?? how does the inner race be removed? it looks like it would break of you try to tap it out
Where I can buy the dit jig
If there’s play at the hub, can we fix it by tightening the preload nut?
Just try to adjust the preload first.
Great video! Can I upgrade the USB bearings form Shamal with CULT bearings? Thanks!
Here is the information that you have to consideration. weightweenies.starbike.com/forum/viewtopic.php?t=131585
Como cambiar el bodi al Rin tracero por un body Shimano
Onde encontro esse rolamento pra reposição no Brasil???
👍👏👏👏
Help help , como quito el ruido cuando freno , de la rueda trasera uso las zapatas adecuadas pero suena muy feo
L'utensile che usi al minuto 1:09 è auto costruito o si puo acquistare?
Hi. Waht is the reference number diy jig you use in opposite end cap?. I can not to find it in any shop
He made it himself. Picked up that in earlier comment.
What kind of green grease to lube?
The green grease is Shimano premium grease and I use it for metal & ceremic ball bearing lubricatin
Soy de Venezuela y no consigo los piñones campañolo
Can i change wd40 to degreaser liquid?
1. I never try degreaser liquid before.
2. WD40 is frentely for many parts such as seal, rubber and all bicycle parts metals. but degreaser liquid not sure (depend on each brand) anyway if you decide to use it please be sure there is no any side effect to all that parts mentioned.
What grease do you recommend for steel and ceramic bearings?
He uses Shimano green for bearings, but you can use any bearings grease like Campa from Morgan Blue
It just has to be very smooth and not sticky
@@vyvyvyvyvyvyv thank you!!
How to get that DIY Jig? I hava same problem
Bring the jig drawing according to below link (last page) to the machine shop.
www.google.co.th/url?sa=t&rct=j&q=&esrc=s&source=web&cd=18&cad=rja&uact=8&ved=2ahUKEwi68M7LhproAhVW_XMBHWKhAOIQFjARegQIAxAB&url=https%3A%2F%2Fwww.facebook.com%2Fmegear.bikerepair%2Fposts%2F%25E0%25B8%2595%25E0%25B8%25B1%25E0%25B9%2589%25E0%25B8%2587%25E0%25B9%2580%25E0%25B9%2580%25E0%25B8%2595%25E0%25B9%2588%25E0%25B8%25AD%25E0%25B8%25AD%25E0%25B8%2581%25E0%25B9%2580%25E0%25B9%2580%25E0%25B8%259A%25E0%25B8%259A-jig-%25E0%25B8%2595%25E0%25B8%25B1%25E0%25B8%25A7%25E0%25B8%2599%25E0%25B8%25B5%25E0%25B9%2589%25E0%25B8%25A1%25E0%25B8%25B2%25E0%25B9%2583%25E0%25B8%258A%25E0%25B9%2589%25E0%25B8%2581%25E0%25B8%25B1%25E0%25B8%259A%25E0%25B8%2587%25E0%25B8%25B2%25E0%25B8%2599-service-%25E0%25B8%2594%25E0%25B8%25B8%25E0%25B8%25A1%25E0%25B8%25A5%25E0%25B9%2589%25E0%25B8%25AD%25E0%25B8%25AB%25E0%25B8%2599%25E0%25B9%2589%25E0%25B8%25B2%25E0%25B8%2582%25E0%25B8%25AD%25E0%25B8%2587%25E0%25B8%2597%25E0%25B8%25B1%25E0%25B9%2589%25E0%25B8%2587-campagnolo-shama%2F830557673769488%2F&usg=AOvVaw2-_BQZftD2Z1XE7Sv9pxeS
Thanks I have the same problem. Will get jig made up. (Wish I'd seen your video before I scored the metal on that side trying to use a cone wrench).
This jig is what I was looking for. Thank you very much for your information!!
@@gcolumbia same here ! fuck !
Buenos tardes donde puedo conseguir la pieza para desmontar el eje?
it is DIY tool.
ใช้น้ำยาอะไรในการทำควทมสะอาดครับ
WD-40 เเบบกระป๋องครับ
@@megearbikeshopd.i.y.2883 ขอบคุณครับ
Where to buy the diy jig? Is it possible to use an adjustable spanner instead?
น้ำมันก๊าดใช้ได้มั้ยครับ? ผมใช้ล้างโซ่ประจำ มันจะกัดซีลมั้ยคับ?
ไม่เเนะนำครับอาจทำให้ซิลได้รับความเสียหายครับ
Where to buy a cone?
What is the cone you meaning? please expline.
@@megearbikeshopd.i.y.2883 bearing cone....
@@wadi7149 see this below link.
www.bikebug.com/product/campagnolo-shamal-mille-clincher-wheel-spares