I appreciate the detail and effort that went into this upgrade. I cringed though, watching how the truck was washed. Your customer has good taste in parts and accessories.
he opened the door and sprayed water inside?!?!? WTF is wrong with this moron???? he is not fit to flip burgers at McD's with that IQ. If I saw that done to my truck I'd loose my freakin mind!!!
I would agree with you however my detailers get new brushes quite frequently and are meticulous with how they store them. Thanks for the feedback though!
I have a 2017 F-150 XLT with Level II. VIN traces her back to Boisvert Ford. Seats have the LEVEL II braided stitching. Only wish it was supercharged. Here in the states its one of a kind!!!
Since you ask well could air intakes about 300$ more would really be a nice addition just saying... For the rest I think it's all in the client's hands. Great job guy's from Canada Qc..
It is the grill from the F150 with the Special Edition Package, the one that comes with the stripe down the side. This is not the first time we have been asked to switch out for this grill, looks real sharp.
@@MrKjsrt4 If I remember properly it was about $10k installed. But really depends on exactly the options you want. Could be a little less, could be a little more.
Bad Levelling kit install you’re supposed to loosen upper control arms bolts put everything together take the weight off of the suspension then tighten the bolts so you don’t put extra stress on your bushings
I don’t understand lifting and leveling. Isn’t the truck level? If not why not? Why wouldn’t it be made correctly. Im guessing leveling increases gas mileage. Don’t understand why it’s not made Efficiently
Our detailers are very experienced and store their brushes very well. Also, they switch them out quite frequently. They are not like the brushes you would find at a coin wash.
I have mentioned many times through out the comments what parts we used. Was there something you had a question about? I would be happy to answer it for you! We are a dealership and don't want to give away all of our secrets.
The truck is a beauty just got mine I have a 3.5 ecoboost and iam gonna do exact same thing this truck has this truck will look better if it was a 4inch lift
Can you be clear as to what wheel well accommodations were made? Several times you said "minor plastic trimming," then other times you said "removed crash bars." That's not minor. Which is it?
@@GrantSchubertcustom …insurance refused to pay me for damages to the front end behind crash bar in a 20mph crash. Said if crash bar were present, damage would not have occurred. Now im fighting with insurance company. Ford did the work, but wont defend me at all. Insurance adjuster claims it’s a violation to remove or modify the crash bar. Never heard of such a thing in my life 🤷🏻♂️🤦🏻♂️😡
The 305 vs 275 adds 1.13 height and 1.18 in width. Suprising they would not fit assuming a +44 offset wheel without needing a lift. If you going to spend that kind of money on the suspension go with a bigger and better tier.
Like the video for sure. I'm curious as to why your shop approved the catalytic converter delete? Basically violating epa guidelines. I get it if the owner does it themselves, but I really think you should hold yourselves to a higher standard and kindly refuse to eliminate epa required equipment.
He did not remove the catalytic converter. As you say, that is violating guidelines and is illegal, which is something we would never do. Even if a customer requested us to do that we wouldn't. Thanks for the comment though!
JL3Z-8200-PU is the grill number and JL3Z-8213-A is the emblem. Your local Ford dealer should be able to get it for you. If not we can certainly help out!
The dealer where I purchased my 2019 XLT told me that they can not install a leveling kit cuz it could damage by changing the angle of the half shafts ... in prior models it was not a problem but for the year of my truck it is. The suspension and alignment guy from the dealer recommends against it. Idk never heard of this before
We are installing a level kit on a 2020 F150 as we speak. I think maybe they were worried about not doing the job properly and something breaking? Bring your truck up to us and we will get it done!
Lol. I'm not sure what the poor fitting leather seats would run, but dual exhaust is a few hundred. Wheels/tires/2" spacer lift front/rear with alignment is less than $3k. Not sure where the other $7000 comes from, but my guess would be a "convenience fee" for dudes who don't know how to modify themselves.
I assume this was a new truck right off the lot that was customized...therefore, I was surprised to see the amount of rust on the rear diff, axle and exhaust. Also, if it was my truck, and money was no object, I would have fit some larger diameter brakes under those big wheels to deal with the added weight and rotating mass...and since you replaced the exhaust, why did you ignore the other half of the air flow equation? Should have put an intake under the hood.
A set of katzkinz with that style and stitching is around 1500 depending on the company you buy from. That's installed too. There are some knock offs on ebay for 600 but they aren't full leather and you still have to install them or pay for them to be installed.
It depends which trim level you have and if you have the front camera. Little more expensive if you have the camera but I believe it is $1200-1500 CAD.
I appreciate the detail and effort that went into this upgrade. I cringed though, watching how the truck was washed. Your customer has good taste in parts and accessories.
Props to detailer my man cares 👏👏
Great looking but the thing i wouldve done different is have you remove all the stickers and decals, not put more on.
The reason why you never have a dealership wash your car 🙈
As a detailer I wanted to scream! 😂🤣
You think they would know how to properly wash a car 😂
@@FIGNAS83 you would expect that, wouldn't you?
I always tell them DON'T wash my car....😂
he opened the door and sprayed water inside?!?!? WTF is wrong with this moron???? he is not fit to flip burgers at McD's with that IQ. If I saw that done to my truck I'd loose my freakin mind!!!
Bro...I am a detailer as well and I was like "please don't use that brush on the paint, pleaseee don't!" lol
@@theodoreanderson4204 right?! 😳
I was like noooooooo!!😂🤣
Al Pacino made that stock exhaust removal look super easy.
Truck looks amazing. I would have changed the front head lights to LED. But great job!
Next step: Level ll paint correction after that brush!...cringe!
Reminded me of how they wash the elephants at the zoo. Made me cringe.
Ouch!
Loo mine was mint until they washed it at the dealer , next time ill go with , complementary car wash? Fuck noooo
For real 😳
Black chrome badges would really finish the look
That is the stance I am building, hope the parts get in before Christmas.
I can’t believe they actually showed the guy washing the truck a sand paper on a stick 😂
Yikes, using a brush to wash brand new black paint...did you charge extra for the paint swirls & scratches or is that included no extra charge?
I would agree with you however my detailers get new brushes quite frequently and are meticulous with how they store them. Thanks for the feedback though!
Hahaha 😂
@@GrantSchubertcustom I don't care if they changed brushes every single wash. Never wash a car with deck brushes.
Nice build. Agree with previous comment on doing blacked-out emblems front and back, and maybe some different side rails for a more custom look.
I have a 2017 F-150 XLT with Level II. VIN traces her back to Boisvert Ford. Seats have the LEVEL II braided stitching. Only wish it was supercharged. Here in the states its one of a kind!!!
One Man Gang!! great job. Awesome.
Awesome job. Beautiful truck
Are the fuel rims a +12 offset?
same brush for the motor onto the paint?!?!
It looks great! It will definitely suit someone's fancy.
Upgrade to some Bilstien 5100's to level it instead of the spacer
I like those black lug nuts what's the company name that makes the lug nuts they look good
Looks great afterwards! Great transformation. What brand leveling kits did you use??
We will use whatever the customer requests. For this one I believe we used the Skyjacker kit.
@@GrantSchubertcustom ok great thanks! Looks great!
Since you ask well could air intakes about 300$ more would really be a nice addition just saying...
For the rest I think it's all in the client's hands.
Great job guy's from Canada Qc..
What motor is in the truck and what exhaust did you use
Great video love love the work you guys do.What grill is that?
It is the grill from the F150 with the Special Edition Package, the one that comes with the stripe down the side. This is not the first time we have been asked to switch out for this grill, looks real sharp.
@@GrantSchubertcustom hi grant how much would that package run you??
@@MrKjsrt4 If I remember properly it was about $10k installed. But really depends on exactly the options you want. Could be a little less, could be a little more.
@@GrantSchubertcustom o ok thanks for the quick response 👍
This is my favorite lift.
Looks fantastic, what is the cost with what you done to this truck?
Why would you do this work and stick with the factory intake?
Soooooo nice, what's the wheel off set?
Brand new frame has surface rust?
A beast 👍🏻
what is the offset on the rims
Bad Levelling kit install you’re supposed to loosen upper control arms bolts put everything together take the weight off of the suspension then tighten the bolts so you don’t put extra stress on your bushings
Similar setup on my truck with lift wheels and tires but mine is the FX4 model.
His was an FX4 as well. You can add that on to a few of the different trim packages. This was an XLT FX4
Keep it up, love those before and after ! (first)
boy am i glad i didnt have my dealership wash my 2018 f150 limited when i got it new
I don’t understand lifting and leveling. Isn’t the truck level? If not why not? Why wouldn’t it be made correctly. Im guessing leveling increases gas mileage. Don’t understand why it’s not made Efficiently
Particulars on the wheels? What size 20x?????, what Offset etc etc
Where do I find that mesh grill? Is that a Ford grill that is interchangeable or is it aftermarket? I hate the style grill on my 2020
Great news, it is a Ford grille so your local dealer should be able to help out!
Great video! What type of exhaust did y’all Install?
That's what I'm wondering. Great sound
It’s that standard Flowmaster made for the F150. It did sound awesome
Tht exhaust is the flowmaster super 10
Scrub brush + black paint = terrible scratches when they offer to clean always refuse it 😬😬
Came Out nice I liked It. You gave tire size and make and wheel size and make. But what wheelset? positive/negative +/-
+1mm offset.
Does that affect the miles per gallon much?
Quick question, Why would you use a brush to clean the truck especially black? Your just putting swirl marks in a brand new vehicle for a customer?
Our detailers are very experienced and store their brushes very well. Also, they switch them out quite frequently. They are not like the brushes you would find at a coin wash.
You must public the link to obtain the parts used in that truck to obtain the same parts for the same job
I have mentioned many times through out the comments what parts we used. Was there something you had a question about? I would be happy to answer it for you! We are a dealership and don't want to give away all of our secrets.
Belle finition magnifique
J'ai le même je pense acheté le même kits
Hello is this a FLUSH STANCE RIM ?
A BRUSH ON BLACK PAINT????. I wanted to SCREAM!
Is this a 5.0 or a 3.5 ecoboost?
5.0L, typically the only engine we will use for our custom trucks. Gives the best sound!
The truck is a beauty just got mine I have a 3.5 ecoboost and iam gonna do exact same thing this truck has this truck will look better if it was a 4inch lift
Awesome truck! Should have blacked out the Ford decals!!!!!!
Hey Grant Buddy. Why no list of upgrades in your comments with pricing? Du Du Doy......
Need fender flares and b lack out badging. Interior is very nice
Would’ve blacked out the badges on the fenders and grill and tailgate , not a big fan of the dual exhaust to much play of the pipes.
Did you guys add fender flares or are those the OEM?
We did not add any fender flares, those are stock.
@@GrantSchubertcustom
Thanks, by any chance do you know how much rim and tire combo stick out past?
@@billyboy55 With this setup the tires stick out about an inch, maybe two.
@@GrantSchubertcustom k thx
Do all Ford dealerships do this kind of work?
No, not all dealerships, and I don't think anyone does it as good as us!
Did you need to cut out the crash bars in the front to make space for the tires?
Yes, we had to trim down the inside of the front wheel well and remove the crash bar in order to prevent any rubbing.
Thanks. My favorite looking f150. I will be doing the same setup after seeing yours.
Can you be clear as to what wheel well accommodations were made? Several times you said "minor plastic trimming," then other times you said "removed crash bars." That's not minor.
Which is it?
@@GrantSchubertcustom …insurance refused to pay me for damages to the front end behind crash bar in a 20mph crash. Said if crash bar were present, damage would not have occurred. Now im fighting with insurance company. Ford did the work, but wont defend me at all. Insurance adjuster claims it’s a violation to remove or modify the crash bar. Never heard of such a thing in my life 🤷🏻♂️🤦🏻♂️😡
What was the wheel and tire combination on this
Looks like a 20x9 305 55r20 Good Year Wrangler Duratrac.
The 305 vs 275 adds 1.13 height and 1.18 in width. Suprising they would not fit assuming a +44 offset wheel without needing a lift. If you going to spend that kind of money on the suspension go with a bigger and better tier.
Did they do the ultimate spacer lift....🤣🤣
WHERE IS THE VIEDO ON THE LEVLNG KIT
Pro comp is the only lift that fits and rides correctly on our f150
Borla or corsa would been better choices for the exhaust
Did you have to cut anything so the tires don’t rub?
Yes, we trim the plastic in the front wheel wells to prevent rubbing.
I want my truck to sound like this. What level kit is this?
We use the American Thunder Exhaust with the Skyjacker Levelling kit.
Where can I get the leather
Awesome!
What size tires and what rims are these??
How much poke is on these tires?
I don’t understand why people do this to their trucks and dont put towing mirrors on
Like the video for sure. I'm curious as to why your shop approved the catalytic converter delete? Basically violating epa guidelines. I get it if the owner does it themselves, but I really think you should hold yourselves to a higher standard and kindly refuse to eliminate epa required equipment.
He did not remove the catalytic converter. As you say, that is violating guidelines and is illegal, which is something we would never do. Even if a customer requested us to do that we wouldn't. Thanks for the comment though!
What size spacers did you use to level it?
Is the truck a lariat edition? Looking at the original grille?
We started with an XLT with the Sport package for this build.
Keith p Ford F-150 sxt grill
@@elcompajaramillo20800 STX*** but the truck is an XLT
I guess safety glasses are optional?
Harsher ride after leveling kit?
Nope! Can't tell the difference!
What are the specs on the rims and tires, would deff like to put this setup on my truck
20" wheels with 33" tires, the offset depends on what kind of suspension you have to accommodate.
Grant Schubert i want to a 2” to2.5” level and was hoping for slight poke outside of fenders the same as this truck what offset is that?
Grant Schubert 20x what ??
@@manuelalanis1837 what measurement are you looking for?
Now just slap on the $10,000 addendum sticker for about $2500 worth of stuff
Lol! True
No way. The level kit, wheels, and rims are over $3k. I bet the material for this build would be about $6800
Lol so true, a puck spacer and some bigger tires and theres ye ol' $10k 'accessories' markup sticker in the window lol
Probably is more of a $5k addendum. I’m a lot tech at ford we have the special SCA trucks with custom everything for a total of $20k above msrp.
Watching him lift rims hurt my back haha
😄
what model of flowmaster is that?
Anyone might know what size rim is that ?
I'll take it the customer didn't want his reaction to be on film 😂
lol this isn't extreme home makeover.... move that bus!!!
Any rubbing or trimming needed with those wheels and tires?
Yes, we had to trim down the inside of the front wheel well in order to prevent any rubbbing. It is something we do with 95% of our custom trucks.
Grant Schubert just the plastic or the crash bar ?
@@alsmith3438 we trim the plastic and a small piece of the crash bar is removed
@@GrantSchubertcustom what size tire/wheels would you recommend if one didn't want to modify a wheel well?
@@AzFlipMan it is a very minor modification to the wheel well. If you want to do absolutely none, you would have to go smaller than 33"
Did he really just use the pressure washer why the drivers door was opened blowing water in the cab.
Yes he did 👀
Nice
Beatiful
Coming from a Dodge guy that truck came out really nice 👍🏽
What is the part number for the new grille, where can I source it?
JL3Z-8200-PU is the grill number and JL3Z-8213-A is the emblem. Your local Ford dealer should be able to get it for you. If not we can certainly help out!
What is the name of the rims. I can’t seem to find them. Thanks
Those are the Fuel Tactic rims.
What is the offset of wheel and was there any rubbing??
@@ochevy350 +1mm and we had to trim the plastic a bit in the front wheel well to ensure no rubbing
makes me feel i can do it with a couple crestent wrenches
well, you would probably need the parts too........
How much for one of those special edition package grilles,,,,,real nice lookin truck btw
I believe it was around $1500 CAD?
Isn't that just a grille off of a stx package truck? Definitely better looking than the xlt grille.
@@stangbang100 yes I think the STX uses the same grille as the XLT with the special edition package. I agree, really sharp look
@@stangbang100 CORRECT! STX grille.
What would it cost for a level 2 upgrade?
Depending on the exact upgrades you are looking for it would range between $6-10k CAD
For me it would be the wheel package, 2.5in level kit and exhaust.
The dealer where I purchased my 2019 XLT told me that they can not install a leveling kit cuz it could damage by changing the angle of the half shafts ... in prior models it was not a problem but for the year of my truck it is. The suspension and alignment guy from the dealer recommends against it. Idk never heard of this before
We are installing a level kit on a 2020 F150 as we speak. I think maybe they were worried about not doing the job properly and something breaking? Bring your truck up to us and we will get it done!
Thank you. Do you know if Leveling would mess up my warranty since it is. 2019 truck ?
@@erikcarpio1956 no, as long as it is done properly, using the proper parts.
Grant Schubert
Where r u guys located ?
@@erikcarpio1956 2496 bank st, Ottawa, Ontario,
What are the specs on those wheels and tires?
20" wheels with 33" tires, we do a bit of trimming to ensure there is no rubbing of the tires.
+1mm offset
Grant Schubert awesome thank you!
No eye or ear protection???
David T ....?
What’s the cost of this package ?
I believe with the add ons this customer chose it came out around $10k CAD
Grant Schubert ......... 10K.............. OUCH!!!!!! Did y’all give that dude a reach around also because you screw him
Lol. I'm not sure what the poor fitting leather seats would run, but dual exhaust is a few hundred. Wheels/tires/2" spacer lift front/rear with alignment is less than $3k. Not sure where the other $7000 comes from, but my guess would be a "convenience fee" for dudes who don't know how to modify themselves.
What offset are the wheels?
+1mm offset
I assume this was a new truck right off the lot that was customized...therefore, I was surprised to see the amount of rust on the rear diff, axle and exhaust. Also, if it was my truck, and money was no object, I would have fit some larger diameter brakes under those big wheels to deal with the added weight and rotating mass...and since you replaced the exhaust, why did you ignore the other half of the air flow equation? Should have put an intake under the hood.
Exactly what exhaust was put on ??
Flowmaster super 10
What was the size of the stock wheels?
It started with the 20" XLT Sport wheels
How much is the leather seats .
A set of katzkinz with that style and stitching is around 1500 depending on the company you buy from. That's installed too. There are some knock offs on ebay for 600 but they aren't full leather and you still have to install them or pay for them to be installed.
🔥🔥🔥🔥
Pretty much my 2018.
How much was that grill
It depends which trim level you have and if you have the front camera. Little more expensive if you have the camera but I believe it is $1200-1500 CAD.