Cargo Area 12v Plug and USB Wiring and Install

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ต.ค. 2024

ความคิดเห็น • 25

  • @luchaDor
    @luchaDor 3 ปีที่แล้ว +4

    Definitely cool in Iowa right now...but cooling air is super inefficient, so the compressor is going to run more than if the fridge was full of water bottles, etc. (Think about how warm a lake feels relative to the cool air at night. Water retains heat, or keeps cold longer than air.) So I'd get some cheap water bottles and cool them down in your house fridge, or plug your 12V fridge in the wall and get everything cold...then transfer to the Lexus. Fridge will run less full, than empty.

    • @HawkeyeSkunkWorks
      @HawkeyeSkunkWorks  3 ปีที่แล้ว +2

      Yeah, I was just stating that it was in fact empty at the moment.

  • @Libyanman
    @Libyanman 3 ปีที่แล้ว +4

    Nice to share your ideas. Thanks mate

  • @JohnLee-sr1jd
    @JohnLee-sr1jd ปีที่แล้ว +1

    Do you know how I can bypass the power on/off button as I have it wired to ignition but always have to push it on after the car started

  • @ohnoy2k
    @ohnoy2k 3 ปีที่แล้ว +1

    Where did you ground to? Also did you just run 1 power from the battery to the 2 power wires on the plug panel like a Y? Don't know much about electrical stuff 😬

    • @HawkeyeSkunkWorks
      @HawkeyeSkunkWorks  3 ปีที่แล้ว +2

      Yes 1 wire from the battery to the 12v plug then a jumper over to the the usb charger. There’s tons of bolts going into metal behind that panel to ground to and same principle with the ground wire going to the plugs.

    • @ohnoy2k
      @ohnoy2k 3 ปีที่แล้ว +2

      @@HawkeyeSkunkWorks that's what I figured but wanted to make sure. Thanks dude!

  • @Threedaysextension
    @Threedaysextension 4 หลายเดือนก่อน

    What fuse did you use?

  • @dannynguyen8963
    @dannynguyen8963 4 หลายเดือนก่อน

    Does this drain your battery being on constantly without a on/off switch ?

  • @evanmalinowski6302
    @evanmalinowski6302 3 ปีที่แล้ว +2

    Check out Bisongear 🦬 they make a really nice divider/shelf for the rear comes in around $250 which is much more affordable then JWoffroads unit. I am about to order one for my birthday gift to myself.

    • @HawkeyeSkunkWorks
      @HawkeyeSkunkWorks  3 ปีที่แล้ว +1

      Good to know. Not a huge fan of those but I know a lot of people are. Thanks

  • @azfarc11
    @azfarc11 3 ปีที่แล้ว

    Hey Joe!
    Thanks for the helpful videos!
    I need help with my GX, changed all shocks to 5100s.. Now I got lights on my dash because of the front shock absorber sensor was removed. What can I do to get rid of the annoying lights on the dash?

    • @HawkeyeSkunkWorks
      @HawkeyeSkunkWorks  3 ปีที่แล้ว

      Not sure, I expected that but I dont have any lights. Im still running air bags maybe thats the reason. I know there are videos out there addressing it though.

    • @azfarc11
      @azfarc11 3 ปีที่แล้ว

      Thanks for the reply.. Im also running air bags on the rear just changed the shocks. Did you plug back your shock absorber sensor back thats mounted on top of front shocks?

    • @HawkeyeSkunkWorks
      @HawkeyeSkunkWorks  3 ปีที่แล้ว +1

      @@azfarc11 No I trashed those modules.

    • @azfarc11
      @azfarc11 3 ปีที่แล้ว

      and you did not get any lights on the dash?? If you didn't that means Abs wire got stretched or ripped 🤔

    • @azfarc11
      @azfarc11 3 ปีที่แล้ว

      my bad just read you 1st reply..Damm it's the abs I guess 😢

  • @guitardude0909
    @guitardude0909 ปีที่แล้ว

    how much would this install cost if i went to a shop to do?

    • @HawkeyeSkunkWorks
      @HawkeyeSkunkWorks  ปีที่แล้ว +1

      figure $100+/hr labor plus parts. $200-300 probably.

  • @ernieRUOK
    @ernieRUOK ปีที่แล้ว

    Subs draw a lot of power, you could probably tap in there

  • @v2bincvideos
    @v2bincvideos 2 ปีที่แล้ว

    I hate these damn commercials man