Great video and very informative! I'll be installing my pump next week. Did you use a 4 or 5-pin relay? I also see they're available with different amps. Do you mind providing a link? Wanna make sure i get this right the first time around. Much appreciated!
thank you for this video and explaining everything gonna do same set up on my trx ... also I will be making a resistor to fool the oem harness and oem tune that pump is still there .... while I install the set up ...
@@jonathanbumbul4673 no problem at all. All in the name of speed. I hope the resistor idea works but worst case scenario it’s an easy fix for your tuner to remove or fool the computer to think the stock pump is still in place 👍🏻
Good explanation man. Appreciate it because that’s what I’m tackling tomorrow. Hopefully this trx pump isn’t too strong because I didn’t get a pump controller. Will that be an issue?
@@Modaddiction19 Thanks for the break down of the wiring. It helped me when installing. I kept blowing 20 amp fuses, so I was looking for a controller that would handle it. Right now I haVE MINE A 100% all the time.
I actually do run it at 100% most of the time. I just like the ability to control the flow if I choose to. You can run this system without the controller with no problem 👍🏻
Changed my I/C Pump out today on my Redeye, appreciate the video helping me with that.
@@JP4SHOREDEYE That’s awesome, you are going to love the new pump it keeps temperatures down and cools way faster! 👍🏻
Great video and very informative! I'll be installing my pump next week. Did you use a 4 or 5-pin relay? I also see they're available with different amps. Do you mind providing a link? Wanna make sure i get this right the first time around. Much appreciated!
Glad it was helpful. Pump is amazing and should work great for your application. I used a 4 pin relay rated at 40amps.
a.co/d/czzxBGk
thank you for this video and explaining everything gonna do same set up on my trx ... also I will be making a resistor to fool the oem harness and oem tune that pump is still there .... while I install the set up ...
@@jonathanbumbul4673 no problem at all. All in the name of speed. I hope the resistor idea works but worst case scenario it’s an easy fix for your tuner to remove or fool the computer to think the stock pump is still in place 👍🏻
@@Modaddiction19 very true but I need to look as OEM for state ref lol purposes
@@jonathanbumbul4673 ok makes sense, good luck
Can u explain how to wire that resistor and what resistor to use thanks
@@franciscohernandez7392sorry, honestly not too sure how it would wire up.
Good explanation man. Appreciate it because that’s what I’m tackling tomorrow. Hopefully this trx pump isn’t too strong because I didn’t get a pump controller. Will that be an issue?
Thanks I appreciate it! You will be fine I’ve been running mine at 100% most of the time so no controller needed. Good luck 👍🏻
With no codes??
Any codes?
@@lchill2003 yes I believe I got two codes. I had my tuner remove them for me so now I don’t have any codes 👍🏻
@@Modaddiction19 trying to do this on my trx as well how well did it cool the temps ?
Did that controler hold up? It says its only good for 15a.
Yes the controller is holding up fine. Very happy with the complete system.
@@Modaddiction19 Thanks for the break down of the wiring. It helped me when installing. I kept blowing 20 amp fuses, so I was looking for a controller that would handle it. Right now I haVE MINE A 100% all the time.
I’m glad the video helped you with the install. The pump is amazing and does a great job. I run mine at 100% most of the time as well 👍🏻
Greatly appreciate it bro. One more question. Did you have your extend your pulley system? My top pulley seems to be touching my supercharger snout
No I didn’t have to extend my pulley system? Not sure what the issue could be. Sorry man
Why not run it at 100% all the time?? Is it a bad to do? I didn’t wanna do the controller. Thanks in advance
I actually do run it at 100% most of the time. I just like the ability to control the flow if I choose to. You can run this system without the controller with no problem 👍🏻
@@Modaddiction19ok thanks do you mind telling me where you got yours from?
@@keithjones7304 I got the controller from Amazon
a.co/d/60O4REc
I ordered my CWA400 pump directly from FI Interchiller
How is IC coolant temp 23°
Pretty impressive hey!!! I have a Killer Chiller and bypass my intercooler with inline servos. Check out my other videos. 👍🏻
Doesnt the cwa400 have an internal relay?
Honestly it might but I’m not sure? I’m just happy I got everything to work for me 👍🏻
How you bleed the system
The best way to bleed the system is to use a vacuum fill to make sure you gave no air in the system. Check out my other videos to see how to do it 👍🏻