Nice diag & repair Joe. Saved the customer some $$ parts & labor and the truck doesn't know the difference. Now the truck is running good and hopefully you'll have a loyal customer.
Just had the same no crank no start on my 02 ranger 3.0 and stumbled across your video. My situation turned out to be a loose ground, but I did learn from your video troubleshooting. Thanks man!
After replacing the neutral safety switch on the clutch, the starter, the Ignition, it ended up being a starter cellinoid switch part number motorcraft F5-TU-11450. Cost was $24 at Advanced Auto Parts. 9/17/23. Replacement took 5 mins. Skill level is you can do with your eyes closed. Need a 14 mm wrench and 8mm socket. My wife helped turn the key with the clicking noise comming from the drive side fender area. I located the part bolted to the inside of the fender. Everyone needs the wifediagnostic expert, she really saved the day!
Good video nice to see someone who knows his stuff with electrics with a proper check out and not afraid to get involved a do a fix on an older truck instead of charging extras for a new box. Skills are key ,good man.
I just found your video while looking through other troubleshooting videos for my 2009 Ranger I may have this similar issue since I can't get a reading on the code reader. But I like your step by step diagnosis for the electrical.I will be testing it over the next few days .I will let you know if I find it .Thanks for the video and helpful instruction.
Thanks this shows that I have been looking for with my truck and this shows a wire bad in the fuse box feedings the pcm and it not having power when a scan tool is plugged in the computer doesn't so as being powered and I was looking for where to look and this video shows me the same issy that my truck is having I should have looked for this video sooner and I could have been driving the truck instead of working on it thanks for this video I we'll have my truck ready for work soon and have a good vehicle to use
I had some wires on a bcm that were horrible, They were full of green crust and and some looked tarnished, so I thought snip em back go get some from j.y. wait a minute why not use the hand held sand blaster from harbor freight, man it cleaned those things up like brand new.
Nice diagnosis and repair, that would have been my best repair option as well on a car that age. Bet your repair will outlast the car. Have you tried liquid flux ?. I find it brilliant for wiring repairs.
You ever get one of these where it has the CEL when key on but when you try to start, get a momentary crank at starter but then the whole truck goes dead(lights and all) the only way to get power back to anything is unhook/rehook battery. Im assuming its a junk cable to the starter but cant figure out what would be killing all power to everything
Is this a common problem? I just picked up a ranger today and he said he couldn't get it to crank and I can't check it out can't till tomorrow afternoon
Sitting here in the park, dead. Waiting on my tow. Got a new battery and alternator yesterday.... 2002 Ford Ranger Echo. Took me 6 months to save and now I am about to cry, I cannot afford anymore work. We have to eat, FFS I WISH cars were made like they use to be, without all the friggin' computerized BS. I have heard it is a common problem. Lots of videos about it on YT.
I believe today i found out that is exactly what is wrong with my Ranger; the starter is good, the ignition switch is good, the peddle safety is good, the relay is being powered,but i dont get the signal voltage from ignition switch to starter. What i did get from ny voltage meter is that voltage flows into motor block, when ignition key is turned on
Fuel to burn, oxygen to support combustion, and an ignition source to start combustion. This is were you start your diagnostic. He has lost ground to the ignition coils betcha.
I like how this guy Just Smokes over the vehicle and has ashes just everywhere. Also in the beginning of the video doesn't anybody bother to question why was the starter replaced first without testing the starter on a machine to see if it was good or not. Having general knowledge is good but troubleshooting is key to not charge the customer an arm and a leg or something that could have just been simply diagnosed. Who said it wasn't helpful other than the schematics
If what you got out of the video was the fact that I smoke over a vehicle you should probably be watching something else. And did you assume that we put the starter in the vehicle? If so, listen better next time. We did not change anything on the vehicle without testing. It was done elsewhere. Go take some more videos of fires instead of seeing if you could be useful to the people involved. Clown.
The man clearly said in the very beginning that the customer had a starter put in and no luck AND THEN AFTER THAT they had the truck towed into Joe Electrical. SMH some people can't help themselves by not giving where credit is due. The fact that you Even wrote that in the comments and your hundred percent wrong is hysterical.
Hi I enjoy mechanic work and wear the day I was pretty good at it but now the computers the whole system is changed to me I can work on 1939 bulldozer right about 1992 is there any thing that I can find help me learn about schematics wiring stuff like that with the computers on the internet 51 step wasn't out there when we started I kind of gave up where can I buy most of the stuff myself the snow because I didn't know how to do it noun in a position where I have to learn if you could just send me show where to look on the internet literature that would be cool thank you and nice work I'm still watching video
Thanks for watching. If you are looking to learn, I strongly suggest joining up with groups on facebook for automotive technicians. They can lead you to training. AESwave sells a lot of training material also.
@@JoesAutoElectric Most people can't solder for shit with the soldering iron. And you did it with a Blow Torch to boot. You know how many mechanics just heat the solder and let it run. Never mind never use flux. Great to see it done right.
What a hack . The other option is to spend less than a dollar to fix it permanently by replacing the connector and putting it back in the main fuse box done I've done it plenty of times so simple
@@JoesAutoElectric I've never used a torch working on electrical stuff on a vehicle I've always used a correct solder and iron and also you can replace those connections inside the fuse box no issue they are cheap
@@JoesAutoElectric Aye joe. . Screw the trolls bro. . You just helped me solve my escapes No Crank - Start problem. . What a Hack. . Smoking cigarettes & what not. . Beware of Joe everybody. . He may give your motor 2nd hand cancer. . Plus. . He installs starters that other hacks install at their shop while doing it!!! Fuckin tool!!
Nice diag & repair Joe. Saved the customer some $$ parts & labor and the truck doesn't know the difference. Now the truck is running good and hopefully you'll have a loyal customer.
Just had the same no crank no start on my 02 ranger 3.0 and stumbled across your video. My situation turned out to be a loose ground, but I did learn from your video troubleshooting. Thanks man!
After replacing the neutral safety switch on the clutch, the starter, the Ignition, it ended up being a starter cellinoid switch part number motorcraft F5-TU-11450. Cost was $24 at Advanced Auto Parts. 9/17/23. Replacement took 5 mins. Skill level is you can do with your eyes closed. Need a 14 mm wrench and 8mm socket. My wife helped turn the key with the clicking noise comming from the drive side fender area. I located the part bolted to the inside of the fender. Everyone needs the wifediagnostic expert, she really saved the day!
Umm...yea...only that isn't the case here so not sure how it's relevant.
Good video nice to see someone who knows his stuff with electrics with a proper check out and not afraid to get involved a do a fix on an older truck instead of charging extras for a new box. Skills are key ,good man.
I just found your video while looking through other troubleshooting videos for my 2009 Ranger I may have this similar issue since I can't get a reading on the code reader. But I like your step by step diagnosis for the electrical.I will be testing it over the next few days .I will let you know if I find it .Thanks for the video and helpful instruction.
That is an awesome job you did Sir and Tks for sharing the knowledge....I have the same no start issue with a b3000....
Good job joe I remember you back when you were a kid
Good diagnosis. This is a great technician!
Nice fix! good job on finding the fault!
Good to see you back, great video!
Thank you. I'm trying to get some videos for you guys.
You good, a pleasure watching you work. Thank you!! Mic'2024 😊!!
Thanks this shows that I have been looking for with my truck and this shows a wire bad in the fuse box feedings the pcm and it not having power when a scan tool is plugged in the computer doesn't so as being powered and I was looking for where to look and this video shows me the same issy that my truck is having I should have looked for this video sooner and I could have been driving the truck instead of working on it thanks for this video I we'll have my truck ready for work soon and have a good vehicle to use
great video Joe reminds me of fuel pump relay failure on TIPM fix thanks
Great diagnosis and fix..
Thank you very much!
Nice diagnose and the best part is it now starts .Lol
Isn't that the truth.
@@JoesAutoElectric i got the same year but the 4.0 could it be the same problem
Outstanding!
I'd pay this man $500 on cash app to virtually help me fix my ranger 🤑
Did a wire completely pop out of fuse box accidentally?
On mine I can put a jumper wire and start it. Should I consider checking under the fuse box for this??
Do 2000 ish ford ranger starter relays need to be replaced frequently?
That's my 2000 Ranger I'm trying to fix now , relays are good
I had some wires on a bcm that were horrible, They were full of green crust and and some looked tarnished, so I thought snip em back go get some from j.y. wait a minute why not use the hand held sand blaster from harbor freight, man it cleaned those things up like brand new.
Hey! Could you help me with a no start 2003 vw beetle crank but no start?
Good job, hope mine is something easier
Were can I get that wiring diagram
Nice diagnosis and repair, that would have been my best repair option as well on a car that age. Bet your repair will outlast the car. Have you tried liquid flux ?. I find it brilliant for wiring repairs.
Yes, liquid flux is great.
You ever get one of these where it has the CEL when key on but when you try to start, get a momentary crank at starter but then the whole truck goes dead(lights and all) the only way to get power back to anything is unhook/rehook battery. Im assuming its a junk cable to the starter but cant figure out what would be killing all power to everything
Load test main power and grounds
Is this a common problem? I just picked up a ranger today and he said he couldn't get it to crank and I can't check it out can't till tomorrow afternoon
Don't know how common it is, but always go through proper testing to verify a cause.
Sitting here in the park, dead. Waiting on my tow. Got a new battery and alternator yesterday.... 2002 Ford Ranger Echo. Took me 6 months to save and now I am about to cry, I cannot afford anymore work. We have to eat, FFS
I WISH cars were made like they use to be, without all the friggin' computerized BS. I have heard it is a common problem. Lots of videos about it on YT.
would it be the same on the 4.0
Excellent
Fuel trims at 50% ?
Thank you
Where do you get the diagrams like the ones in the video?
Alldata
I believe today i found out that is exactly what is wrong with my Ranger; the starter is good, the ignition switch is good, the peddle safety is good, the relay is being powered,but i dont get the signal voltage from ignition switch to starter. What i did get from ny voltage meter is that voltage flows into motor block, when ignition key is turned on
Not sure what you mean by voltage from motor block. Sounds to me like I'd be load testing grounds.
Do you sell the relay tool?
Should be in my amazon store...
Thanks pal
Joe, stop smoking, u can handle stress through exercise, the benefits r astounding!
Joe Laplnski lol yes... I used to train everyday...then I got hurt and gave it up for smoking.
Nice Job,helped a lot! Get rid of finger ring before U weld it to UR finger!
@@JoesAutoElectric smoking is king
You a real gangster
Sicilian
im guess this was a automatic trans not a manual
Fuel to burn, oxygen to support combustion, and an ignition source to start combustion. This is were you start your diagnostic. He has lost ground to the ignition coils betcha.
Well it's a no crank, so maybe it's better to watch first, before guessing. 😂
I like how this guy Just Smokes over the vehicle and has ashes just everywhere. Also in the beginning of the video doesn't anybody bother to question why was the starter replaced first without testing the starter on a machine to see if it was good or not. Having general knowledge is good but troubleshooting is key to not charge the customer an arm and a leg or something that could have just been simply diagnosed. Who said it wasn't helpful other than the schematics
If what you got out of the video was the fact that I smoke over a vehicle you should probably be watching something else. And did you assume that we put the starter in the vehicle? If so, listen better next time. We did not change anything on the vehicle without testing. It was done elsewhere. Go take some more videos of fires instead of seeing if you could be useful to the people involved. Clown.
The man clearly said in the very beginning that the customer had a starter put in and no luck AND THEN AFTER THAT they had the truck towed into Joe Electrical. SMH some people can't help themselves by not giving where credit is due. The fact that you Even wrote that in the comments and your hundred percent wrong is hysterical.
Hi I enjoy mechanic work and wear the day I was pretty good at it but now the computers the whole system is changed to me I can work on 1939 bulldozer right about 1992 is there any thing that I can find help me learn about schematics wiring stuff like that with the computers on the internet 51 step wasn't out there when we started I kind of gave up where can I buy most of the stuff myself the snow because I didn't know how to do it noun in a position where I have to learn if you could just send me show where to look on the internet literature that would be cool thank you and nice work I'm still watching video
Thanks for watching. If you are looking to learn, I strongly suggest joining up with groups on facebook for automotive technicians. They can lead you to training. AESwave sells a lot of training material also.
Bad Ass Technician
Thanks man😊
Jesus.. This guy knows how to solder wires.... I'm dreaming... Tell me it ain't so..
I'm not sure what you're getting at bud.
Not sure what you're getting at bud
@@JoesAutoElectric Most people can't solder for shit with the soldering iron. And you did it with a Blow Torch to boot.
You know how many mechanics just heat the solder and let it run. Never mind never use flux.
Great to see it done right.
👍👍
Dude your volume sucks can't understand what you are saying
Well try watching on something with a better speaker.
Dark video,you can't see s...t
Maybe opening your fucking eyes 🤡
@lagha You must be blind bro lol or make cakes for a living to not know what’s going on. 🤦🏼♂️ love to see your videos.
@@weldingjunkie HAhahahaha
What a hack . The other option is to spend less than a dollar to fix it permanently by replacing the connector and putting it back in the main fuse box done I've done it plenty of times so simple
Who was a hack now?? Maybe you should make some videos showing how great you are. Tired of trolls.
@@JoesAutoElectric I've never used a torch working on electrical stuff on a vehicle I've always used a correct solder and iron and also you can replace those connections inside the fuse box no issue they are cheap
@@chadsmalley383 now you act polite because I responded? Go someplace else and talk shit. I'm not the one.
@@JoesAutoElectric Aye joe. . Screw the trolls bro. . You just helped me solve my escapes No Crank - Start problem. . What a Hack. . Smoking cigarettes & what not. . Beware of Joe everybody. . He may give your motor 2nd hand cancer. . Plus. . He installs starters that other hacks install at their shop while doing it!!! Fuckin tool!!
It's not a car duh
Are you one of those special folks? There are channels for you that are probably better suited to your needs.