@@Damyn562 that's funny I can imagine all the sweat and cussing it took to remove a 13b from the Mazda section of the yard to wherever the astra was Spending the time and effort to hide it in a whole new car. Just to have your hopes crushed later by a guy who was looking for an astra passenger side door handle or something stupid like that.
Honestly man, what gets me the most is when he explains visions for some of these projects they sound so fucking awesome and insane I want to see them! His creativity is amazing we need to see these projects come to fruition!
Finishing an Audi is like finding life on Mars..... It's not impossible, but it's extremely unlikely cuz shit is always breaking on VWs, oops I mean Audis....
I love all of the Hoonigan content, but man is it good having the guys working on project cars again. Would be cool to see Danger Dan, Bad Daddy Braddy, Supie, and Grim make cameos every now and then. 🤙🏻
if the engine doesn't clear the hood they make front frame spacers for the ae86 chassis or you can contact Xcessive MFG and they make a full front subframe with a riser built into it.
man im jealous haha! the pick n pulls we have here are dirt lots, and the cars are super crusty from road salt haha! there's no way you're unbolting the ubolts on a rear diff up here haha! thats angle grinder territory haha! awesome score guys!
Man working on cars in a junkyard in Cali looks like it hits different. Out here in the Midwest it’s grass or gravel, hills, and you don’t want to try to remove an axle with hand tools on a rust belt yard car lol
My main takeaway from seeing the junkyard in this episode is; California cars look like a pleasure to work on. No rust and being able to remove bolts underneath a car with a spanner is so foreign to me.
The rear end from a late 80s early 90s 4wd Corolla wagon is compatible if you can track one down You use ae86 parts to lower the rear end so the opposite has to work right..?
I have a vq35de and cd009 in my corolla, motor will fit for sure, a big trans will need some serious floor and firewall mods not to hang past the rails.
I envy your pick and pulls man, here in the northeast they are usually on the ground in a dirt lot which is typically all mud. Your shit is up in stands on pavement. That's the dream.
Why is a you pick in a blacktop lot .... I guess I'm just used to going to a you pick from Jersey on the shore or New York where it starts out blacktop and then no matter what you have to start crawling through mud
Arizona is your friend, but anything plastic/rubber will be fucked. The heat cooks the oils out of everything. Arizona cars are the only way I can even find good parts for my 50 year old Buick.
Looking at stuff like this, You all should do a junkyard parts build Versus donut media For a certain type of Race, And the only parts you're not allowed to get there is stuff like Is Turbo's superchargers and Breaks Because more often than not you don't want to use one of those Because there's something wrong with them or It's gonna go bad very quick. And both groups Should use the same model car to show off what yall both can do with that specific car. And time limit is 3 months.
Hahaha, i own a supercharged Toyota privera. Didn't start life like that but it is a 4×4. I found the manifold and supercharger on ebay after I bought it. It also has a haltech elite 1500 hahaha! It actually makes 280 wheel. Its the snowboarding bus the thing fux so hard in the snow man. I cut the SHIT outta the fenders and put some 1 inch wheel adapters to fit some GM 6 lug black d window steelies i had laying around wrapped in 32×12.50 big o big foot a/t, then i riveted some 3 inch bushwhacker fender flares for a ford ranger. I rattle canne'd her flat black, limo tint all the way around, and the biggest red smokin snowboards die cuts i could aquire as a sponsored rider for smokin. The interior is all tricked out, mood lighting, 2500 watt amp with 2 12s, 8 midrange, and 4 tweets. Smokin went out of business unfortunately. I told the owner the "buck furton" thing was a bad idea.
Waiting for the guy who stashed the trans to comment here lol
Haha 😂 yeahh
Probably some paisa
Bro I've stashed a 13b in an astro and someone took it first I legit cried
@@Damyn562 that's funny
I can imagine all the sweat and cussing it took to remove a 13b from the Mazda section of the yard to wherever the astra was
Spending the time and effort to hide it in a whole new car. Just to have your hopes crushed later by a guy who was looking for an astra passenger side door handle or something stupid like that.
I'm looking forward to seeing Scotto finish a project for the first time. YOU CAN DO IT SCOTTO
This is the positive support he needs!
Especially seeing the Audi sitting in the background. Still unfinished looking all sad.
Honestly man, what gets me the most is when he explains visions for some of these projects they sound so fucking awesome and insane I want to see them! His creativity is amazing we need to see these projects come to fruition!
Finishing an Audi is like finding life on Mars..... It's not impossible, but it's extremely unlikely cuz shit is always breaking on VWs, oops I mean Audis....
thanks for that laugh 😂
Can we just dub in old school Dan going “Garageeeee garageeeeeee!” In the beginning? That was the best intro.
ABSOLUTELY..!!.!.!! it's not the same without the original intro.. even if it's done by another fellow HOONIGAN..!!
ROYALTIES LOOL
Ron's laugh when Scotto said, "The more I look at this, the more I think it's not gonna fit." It was golden reaction
the less i think its gonna fit*
True friendship right there
8.8 explorer, stock disc brakes, factory LSD, and 3.73 or 4.10 gears. great option! bravo!
I'm glad we been gettin more Gary regularly he's a great vibe
"You pretend you know what you're doing and then you just do it"
I live by these words...
Truly wise words
As a Toyota guy, the Scotty Kilmer cameo really made my day.
This video series brings back really solid college era vibes. Hitting the junkyard and then grabbing some tacos afterward.
I carried myself through college in Ventura in the early 2000's by visiting the pick n pulls all over Socal and reselling to the VW communities.
The older I get, and the more in depth my projects get, the more relatable Scotto’s work-style becomes
Ayo thanks for the shout-out, never in the history of people called Lloyd have we gotten a shout-out and we are grateful 🤙🏽
Can't wait to see what kinda obscure bracket Brian spends 3 hours making...
Bad Obsession Motorsports has made a 9 year career out of making brackets, three hours is fine.
BOM and Hoonigan should go bracket racing.
Lol jeez the whole episode was him talking and looking at parts
@@roodick85 that’s fairly on-brand honestly 😂😂
@@Yvolve ahaha 😆🤭👏🏻👏🏻👏🏻, Scottos Quattro is the US version of Binky!!
I love all of the Hoonigan content, but man is it good having the guys working on project cars again.
Would be cool to see Danger Dan, Bad Daddy Braddy, Supie, and Grim make cameos every now and then. 🤙🏻
Somehow I feel this is one of the best videos you guys have ever put out haha.. more hacking cars together and junk yard runs!
Also close up doggo was wonderful ❤️
if the engine doesn't clear the hood they make front frame spacers for the ae86 chassis or you can contact Xcessive MFG and they make a full front subframe with a riser built into it.
That merkur is going to be NICE at gymkhana!
😂 wonder who’s gonna drive that thing
Hahahahaha
man im jealous haha! the pick n pulls we have here are dirt lots, and the cars are super crusty from road salt haha! there's no way you're unbolting the ubolts on a rear diff up here haha! thats angle grinder territory haha! awesome score guys!
A lot of pick n pulls have also turned into scrap yards where the cars maybe sit for a month before the whole thing getting crushed and scraped.
Man working on cars in a junkyard in Cali looks like it hits different. Out here in the Midwest it’s grass or gravel, hills, and you don’t want to try to remove an axle with hand tools on a rust belt yard car lol
There’s a code you can look up on factory sticker on inside of drivers side b pillar under Axle box
On the driver side door theirs the vin stiker, that were axle info. It my said D4 and just google it will tell you what gear and if it slip diff.
This is the content we need.
So I swaped a 1uz into my 86 and I dropped the subframe down a lil bit too get some more clearance for my hood and too clear the tunnel more
this is cool. Glad project cars are back. Got me through pandemics. Cheers Hoonigan!
1:05 sick GX Jameson!
7:18 jag xjs with the v12 probably ripped out. Breaks my heart every time. Too bad I ain't in SoCal 😢
Scotto's junkyard adventures should be its own show that isn't a show
Becoming my favorite show all over again appreciate all of you building your cars
I’m jealous that your pick n pulls are paved, just dirt here in Texas and back home in Mn
I'm in northern California and our pick and pulls are gravel lots. La is just the city of concrete and pavement.
My main takeaway from seeing the junkyard in this episode is; California cars look like a pleasure to work on. No rust and being able to remove bolts underneath a car with a spanner is so foreign to me.
as a new yorker the lack of rust on everything is amazing
As a Canadian it's wild to me too.😂
The rear end from a late 80s early 90s 4wd Corolla wagon is compatible if you can track one down
You use ae86 parts to lower the rear end so the opposite has to work right..?
I loved this. You guys oughta make more junkyard vids for us!
did you hear that scream echoing around the world? that was scottos bank account after seeing this.
You can also use a rear from a Tacoma with factory lsd or factory locker I've seen people running them with 44s
I have a vq35de and cd009 in my corolla, motor will fit for sure, a big trans will need some serious floor and firewall mods not to hang past the rails.
cleanest pick and pull ive ever seen
I want to say that trans was a movie magic but I did find a B18C in the back of a astrovan covered by broken interior panels once. Good find.
1:14 hol up imma need a 1 hour special about this collection or at least a breakdown of 07/08 which ever the one in the front is 👌🏻
Scotto videos are my favorite because Scotto is the biggest nerd
Hoonigan seems to be the best place to work ever.
I have a drag week car on a 8.8 in the 7s with a stick shift. J and S gear has done everything… welded the tubes.. braced it… he is close and amazing…
Why not use a 4Runner rear end? I know the ford 8.8 is good but I feel like the 4Runner rest would be just as good for what you guys need
The 31-spline 8.8 with the torsen diff is the one you want
7:58 Is that a flat 4?
lmao Rons laugh at @19:25 is incredible
I’m really love watching all the builds.
I envy your pick and pulls man, here in the northeast they are usually on the ground in a dirt lot which is typically all mud. Your shit is up in stands on pavement. That's the dream.
The Xploders have the axle code on the sticker in the door jam too
where is supy ????
So from the looks of it, Scotto is going to be ready to participate with his 86 for the 2025 season.
Most excited for this build by Scoooootooooes! Lessgoooo!
Hey scotto from what I've heard and learned the older Tacoma rear ends were basically same as Ford. Super strong and smaller track width I think.
"Dude, don't scratch the car!"
That is a totally valid sentence in a wrecker yard... 😂😂😁😁🤟🤟
I love to see the dogs! I wish I could bring my dog to work 😂🤘
The cars in that yard and yard itself is so clean. I'm envious.
07:23 ayyyyyyy an Isuzu Trooper on the channel!!!!
Probably another dead auto box. Thanks GM
My ford 8.8 was only 5 inches wider than my gts axle. And already 4 lug. Perfect 86 swap axle
Why is a you pick in a blacktop lot .... I guess I'm just used to going to a you pick from Jersey on the shore or New York where it starts out blacktop and then no matter what you have to start crawling through mud
Man our Pull your part yard is gravel with a lot of mud. That place is nice
Would a 1996-2004 Tacoma axel have worked?
Need more junk yard content
BTW the axle code is on the door stickers in explorers and rangers
Glad to see the shop dog get some love
Aye, that's my local Pick n Pull 🤟🏾
If I'm correct the cd009 came out of a g37s. Recently about a week ago a g37s came in.
Thats like the nicest looking junkyard ive ever seen
Isnt the explorer an offset diff? Why not a fox diff?
You shorten the whole axle, and that centers the diff pumpkin.
7:08 is littleraly me each time I go to the pick n pull.. hahah
I have Morimoto lights on my Tacoma, and I love them. On coming drivers don’t seem to share my enthusiasm.
Where can I got my own hoonigan magnet light??
Wth the cleanest pick n pull I’ve seen😮
Hopefully
to think that scotto was a man of the magazines when this car was still common.
VW guys are depending on you Scotto! Show the world how sick the VR6 is!
Where is that magnetic tool that I can buy I looked on hoonigan store I want one
rip e90 cd guy,and shout out Lloyd, some definite riiiiiiiiiiiiiiiiiiyms vibes in that yard
appreciate the dude magically apearing mid frame just to look for some tool. thanks editor.
I've seen like one Previa, and it was 90% rust. And unlike Scottos Audi issue, the Toyotas run, or will run with a new battery.
Most Ford's have an axle code on the door sticker as well, for us folks that have to deal with rust
I need to know what the blurred Toyota is.
The addiction never ends
B-roll on point. Again. Scotty Kilmer?! Amazeballs.
Loving these episode's
Bro was that the same red cossy from before?
Am I missing something? Was normal price $350 for a rear end? The yard we frequent I paid $90 for the last 8.8 I pulled. Cali prices I guess?🤣
Paving doesn’t come cheap.
@@HooniganProjectGarage guess that’s true. I’m in gravel out here. Come on down and we can pull a plethora for ya 🤣
yeah, i doubt that it's going to fit at the end, just do a k20 setup
It really hurts deep down in my soul that no one does the Garage Garage intro like Danger Dan
Please buy a first gen Previa and make it track ready (engine swap?)
Can’t wait to see how this turns out 👍👍
Being in the north it's soo weird to see a bunch of super clean cars like that in a pick n pull... Might have to make a road trip 😅
Yeah, SoCal yards are great.
so many clean trucks its wild lol
Arizona is your friend, but anything plastic/rubber will be fucked. The heat cooks the oils out of everything. Arizona cars are the only way I can even find good parts for my 50 year old Buick.
Oh man we need a Previa build now
Man, I miss goijg to the pull a part. About for my sons QX4 project tho!
The axle outta that previa would have done pretty well
Looking at stuff like this, You all should do a junkyard parts build Versus donut media For a certain type of Race, And the only parts you're not allowed to get there is stuff like Is Turbo's superchargers and Breaks Because more often than not you don't want to use one of those Because there's something wrong with them or It's gonna go bad very quick.
And both groups Should use the same model car to show off what yall both can do with that specific car. And time limit is 3 months.
Hahaha, i own a supercharged Toyota privera. Didn't start life like that but it is a 4×4. I found the manifold and supercharger on ebay after I bought it. It also has a haltech elite 1500 hahaha! It actually makes 280 wheel. Its the snowboarding bus the thing fux so hard in the snow man. I cut the SHIT outta the fenders and put some 1 inch wheel adapters to fit some GM 6 lug black d window steelies i had laying around wrapped in 32×12.50 big o big foot a/t, then i riveted some 3 inch bushwhacker fender flares for a ford ranger. I rattle canne'd her flat black, limo tint all the way around, and the biggest red smokin snowboards die cuts i could aquire as a sponsored rider for smokin. The interior is all tricked out, mood lighting, 2500 watt amp with 2 12s, 8 midrange, and 4 tweets. Smokin went out of business unfortunately. I told the owner the "buck furton" thing was a bad idea.
More Pick N Pull days please 😊
And surprisingly enough, an LS actually fits in the AE86 chassis
For future reference all explorers are 31 spline
Little s10 looked sweeet too
LETS GO SCOTTOOOO! 👏
I'm down to go to pick n pull with you guys I love those places 💯