Частоту процессора понизить надо до базовой, Выбрать поиск и написать редактор реестра HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\75b0ae3f-bce0-45a7-8c89-c9611c25e100 Дважды нажмите по параметру с именем Attributes в правой панели и установите 2, Потом: "Панель управления", "Электропитание", "Настройка схемы электропитания", "Изменить дополнительные параметры питания", "Управление питанием процессора", "Максимальная частота процессора". И система выше 65-70⁰ не греется, а снижение частоты 3-7% производительности теряет не так критично, система не греется зато до 100⁰, и ноутбук не страдает от перегрева.
I’ve tried the Dot, X, and Spread techniques for applying thermal paste. Here’s what I think: • Spread: The issue with the Spread technique is that it’s difficult to control how much thermal paste you’re applying to the layer. Even if you start with a Dot and then spread it, you often end up with some paste on the spatula, which can lead to less-than-ideal temperatures. • X: I don’t remember the X technique too well, but I think it requires too much paste to form the X shape. Using too much thermal paste isn’t ideal, and it likely negatively impacts performance. • Dot: For me, the Dot technique works best. It’s simpler and more reliable.
Didn't put enough thermal paste in the pea (center dot) method. Been wrist-deep in PC's since 1998 built & repaired thousands of PC's & laptops (and macs) and large pea-sized in the center has never failed me (along with use of Arctic Silver 5 for the past 20yrs). Last method is a complete waste of thermal paste as you will never get 100% contact and what is exposed will either run off or dry out. Possibly might work better on a CPU with offset die using a custom ILM & offset HSF kit like a 7800x3D, Thermalrite AM5 Secure Frame & Noctua NH-D15 & offset kit but I still wouldn't anyways.
the problem is always in the quantity used... it's difficult to understand how much to use and it's a problem if it overflows afterwards, spreading it carefully and removing the excess in my opinion gives the best results.
@@Ever4Me Yeah and then have the liquid metal run off and short your mobo. Only good if mobo is horizontal CPU facing upward. See NorthwestRepair, many liquid metal destroyed laptops.
"First of all, you need to realize why the heat-conducting paste is used. Of course for heat dissipation. But first of all, the heat-conducting paste has to fill the micro-scratches that occur during the manufacture of the cooler or cpu. you don't need to put much in there. It is enough to apply a little, but evenly over the entire surface, to fill these micro-gaps and to increase the thermal transience between the CPU and its cooler." from @martin2239
I feel like the spread would have been better than the X with a tiny bit more paste. It looked the thinnest under pressure in this test. So spread is probably best followed by X. You dont need some special tool to spread paste 😂
First of all, you need to realize why the heat-conducting paste is used. Of course for heat dissipation. But first of all, the heat-conducting paste has to fill the micro-scratches that occur during the manufacture of the cooler or cpu. you don't need to put much in there. It is enough to apply a little, but evenly over the entire surface, to fill these micro-gaps and to increase the thermal transience between the CPU and its cooler.
@kingdomofme3681 that would mean covering the whole face. It's clear you don't know what you're talking about. Any space without thermal paste will not experience heat exchange from the CPU to the cooler as they wouldn't be touching due to thermal paste needed to fill in the micro gaps.
@jeremymcneely1168 just because the thermal paste doesn't spread across everything doesn't mean the integrated heat spreader won't transfer the heat to the heatsink. You clearly haven't taken basic IT classes. This was second week knowledge in my class. We're taught how most people absolutely waste all the thermal paste for no reason.
@@kingdomofme3681 cool I've seen it multiple times the paste creates distance from contact which will result in hot spots. It's been show cased tons of times since the debate of how to apply thermal paste sorry you don't have the IQ to understand how physics work.
I never put much thought into it, i just add one nice size dot and close it 😂i never had a PC overheat or crash etc bcuz of thermal paste. Doing too much
The best is; spread or big dot and the turn cooler 180 or 90degrees and back again. Left right left right. So all paste take every space and everything air go away. Witz All other Methoden u will always have some little air bubble inside.
The pattern of thermal paste it doesn’t matter according to the video soon the technician or the people who put the thermal paste choose how we choose the pattern of thermal paste What matters is the viscosity, quality, price, brand of the thermal paste.
I was born in 2008. I'm almost 17. You must be one of those ancient, prehistoric, ape-like ancestors. They must have lied when they said you guys went extinct.
@@Getrekt-ql3qd Wrong. The part of the cpu that you are putting thermal paste on is called a heat spreader, and it distributes the heat across the cpu.
In the beginning I used to put the pea size amount. Later, when with my 8950 I switched to the X because why not. Nowadays I butter my toast because I want the best thermals I can get. It's evolution baby!
Капельки достаточно. Много термопасты не нужно. Её цель это закрыть микро/мини трещины на процессоре и системы охлаждения чтобы лучше была теплопроводность. А также когда вы закручиваете систему охлаждение,то система охлаждения гораздо сильнее давит на термопасту и она лучше рассплывается по процессору
@@6ejlblu_kot310Крышка процессора не идеальна ровная и там имеются микро трещины в которых находится воздух, следовательно плохая теплопроводность а термопаста эти трещины закрывает и делает поверхность процессора более ровной.
Imo there is no right or wrong way of applying thermal paste due to multiple factors like paste quality, mounting pressure, and ambient temperature. As long as the person uses enough thermal paste the performance should be fine.
Проблема в том, что человеку уже можно показывать всё что угодно и он будет это повторять, потому что мозгов уже своих нет, чтобы подумать, разобраться как будет лучше
You don't push down evenly onto the CPU, so the see through representation is false. You tighten each corner screw one by one. Result is a shape close to square with rounded edges. Small bead in the middle is best and enough.
Видео хоть посмотри, там в варианте с капелькой 87 Градусов максимум, а если полностью размазать то будет 82 макс. К тому же, медная крышка нагревается практически равномерно
Covering the entire chip method wins. I never understood why someone just put one dot of past. It would be to save past? The entire CPU burns equally, not just the center. It's necessary to cover the entire CPU.
People just can't do it... None of those is right. You need to apply a thin cover all over the die. It is not about the paste covering, it is about the paste filling the little spaces on the surfaces.
Кто-нибудь написал, что у стекла херовая теплопроводность? Сама по себе термопаста не отводит тепло.. мозгов у авторе не хватило, чтоб использовать медную пластину?
dot: 87 38
5.X: 86 35
|||: 84 35
x: 82 34
spread: 82 34
😮
Thanks i couldnt see results because of how fast it switched to the next one
Thanks for the summary. Now I don't need to watch the video that was made for The Flash.
I bought the whole tube so I’m going to use the whole tube don’t worry we will get good coverage
111 likes and no comment, ima fix that shit rq
はみでそう
持たない😂
laptop players: "CAN THE CPU BE UNDER 100º???"
Everything will be have solution, bro hehe
Частоту процессора понизить надо до базовой, Выбрать поиск и написать редактор реестра
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\75b0ae3f-bce0-45a7-8c89-c9611c25e100
Дважды нажмите по параметру с именем Attributes в правой панели и установите 2,
Потом: "Панель управления", "Электропитание", "Настройка схемы электропитания", "Изменить дополнительные параметры питания", "Управление питанием процессора", "Максимальная частота процессора".
И система выше 65-70⁰ не греется, а снижение частоты 3-7% производительности теряет не так критично, система не греется зато до 100⁰, и ноутбук не страдает от перегрева.
my CPU heats up to 85°C maximum. I haven't changed the thermal paste on my laptop for 2 years now
Я купил ноут на rtx 4060
Вообще не доставляет неудобств
Греется редко
А в детстве помню на ноуте мог жарить яичницу
@@ВладимирЮрицын yeah I actually have a laptop with a 4060 and it only is above 85º while playing cyberpunk 2077 in ultra but its still insane
I’ve tried the Dot, X, and Spread techniques for applying thermal paste. Here’s what I think:
• Spread: The issue with the Spread technique is that it’s difficult to control how much thermal paste you’re applying to the layer. Even if you start with a Dot and then spread it, you often end up with some paste on the spatula, which can lead to less-than-ideal temperatures.
• X: I don’t remember the X technique too well, but I think it requires too much paste to form the X shape. Using too much thermal paste isn’t ideal, and it likely negatively impacts performance.
• Dot: For me, the Dot technique works best. It’s simpler and more reliable.
Room temp 30⁰ is insane.
I MEANT ROOM TEMPERATURE NOT OUTSIDE
here in brazil is cold
Haha in Ukraine 47⁰ in summer
30° in Brazil is considered cold lol
@@davigabriel6856 30 ta de boa ainda kkkkk
I mean u could just have like ac in your room and make it as cold as u want
Bro This is the best video with accurate results shown by you
Loved it❤
You got a sub!
The Spreader Thermal Paste is good enough for a Heating CPU
Doesnt matter i tried different style. Temperatures increase cuz you put a small amount. Whats important is you put enough paste.
Last one is my favorite 😍
The chip is in the middle, the top is just casing so just put it in the middle there is not point spreading ri the corners and such.
depends on your heatsink size, I use stock cooler on an i5 4460, Temps when spreading thermal paste are worse than when using a pea size dot
the best indicator turned out to be 4) 30,82,34 and 5) 30,82,34
all time : X best. use Arctic Mx-4 thermal paste room temp ryzen 7 5700x 25°
Didn't put enough thermal paste in the pea (center dot) method. Been wrist-deep in PC's since 1998 built & repaired thousands of PC's & laptops (and macs) and large pea-sized in the center has never failed me (along with use of Arctic Silver 5 for the past 20yrs).
Last method is a complete waste of thermal paste as you will never get 100% contact and what is exposed will either run off or dry out. Possibly might work better on a CPU with offset die using a custom ILM & offset HSF kit like a 7800x3D, Thermalrite AM5 Secure Frame & Noctua NH-D15 & offset kit but I still wouldn't anyways.
I do spread for guaruanteed
the problem is always in the quantity used... it's difficult to understand how much to use and it's a problem if it overflows afterwards, spreading it carefully and removing the excess in my opinion gives the best results.
Бери салафоновый пакетик потом размазывай пальцем это удобнее
I used liquid metal. You basically have to massage it in. 🤣
@@Ever4Me Yeah and then have the liquid metal run off and short your mobo. Only good if mobo is horizontal CPU facing upward.
See NorthwestRepair, many liquid metal destroyed laptops.
Also depends on how you attach the cooler
@@jirizurek9685 and good contact surface, good thermal glue
...I mean...there's only 1 correct way right?
I do only spread
X or spread is the best
I like the x!
What's the problem with just smearing it with a plastic card?
"First of all, you need to realize why the heat-conducting paste is used. Of course for heat dissipation. But first of all, the heat-conducting paste has to fill the micro-scratches that occur during the manufacture of the cooler or cpu. you don't need to put much in there. It is enough to apply a little, but evenly over the entire surface, to fill these micro-gaps and to increase the thermal transience between the CPU and its cooler." from @martin2239
Bro you need to use metal radiater not a plastic sheet
Conclusion. It doesnt really matter that much. Just apply the correct amount🤷🏽♂️
I feel like the spread would have been better than the X with a tiny bit more paste. It looked the thinnest under pressure in this test. So spread is probably best followed by X. You dont need some special tool to spread paste 😂
First of all, you need to realize why the heat-conducting paste is used. Of course for heat dissipation. But first of all, the heat-conducting paste has to fill the micro-scratches that occur during the manufacture of the cooler or cpu. you don't need to put much in there. It is enough to apply a little, but evenly over the entire surface, to fill these micro-gaps and to increase the thermal transience between the CPU and its cooler.
Well it should still cover the entire face of the cpu. Also this guy didn't use a pea size for the center method.
@@jeremymcneely1168no it doesn't need to fill the entire surface of the integrated heat spreader, only fill the gaps.
@kingdomofme3681 that would mean covering the whole face. It's clear you don't know what you're talking about. Any space without thermal paste will not experience heat exchange from the CPU to the cooler as they wouldn't be touching due to thermal paste needed to fill in the micro gaps.
@jeremymcneely1168 just because the thermal paste doesn't spread across everything doesn't mean the integrated heat spreader won't transfer the heat to the heatsink. You clearly haven't taken basic IT classes. This was second week knowledge in my class. We're taught how most people absolutely waste all the thermal paste for no reason.
@@kingdomofme3681 cool I've seen it multiple times the paste creates distance from contact which will result in hot spots. It's been show cased tons of times since the debate of how to apply thermal paste sorry you don't have the IQ to understand how physics work.
I never put much thought into it, i just add one nice size dot and close it 😂i never had a PC overheat or crash etc bcuz of thermal paste. Doing too much
The best is; spread or big dot and the turn cooler 180 or 90degrees and back again. Left right left right.
So all paste take every space and everything air go away.
Witz All other Methoden u will always have some little air bubble inside.
X or butter toast. I think I prefer the butter toast
The problem is, he didnt put the same amount like other pattern, dot pattern is good if u give little more pasta
The pattern of thermal paste it doesn’t matter according to the video soon the technician or the people who put the thermal paste choose how we choose the pattern of thermal paste What matters is the viscosity, quality, price, brand of the thermal paste.
None of these.. As an experienced pc builder, i recommend graphite pads
How do u know that the amount of paste is good or not?
Winner?
İntel:
Min:40 C°
Max:105 C° 🤣🤣
Intel only start work at 70 C° lol
Hello Debian guy!
(I also use Debian)
@@CatFromTrabzonim russian man... you're cringe
Why not just spread it with a spatula, I’ve been doing this since 2008 and had no problems since
Careful will bring good results, Bro
It’s because even spending time even spreading you’ll only notice a .5C difference. Every way is almost equally the same temp wise
I was born in 2008. I'm almost 17. You must be one of those ancient, prehistoric, ape-like ancestors. They must have lied when they said you guys went extinct.
@@Plxed what 💀
@@Plxed oh i forgot u guys didnt exist
cross X with 4 points (※) would be great.
My preferred method goes like this...step 1, get rich. Step 2, hire someone to build my gaming pc. Step 3, enjoy.
I like using just the regular dot
I do triple line but make sure it goes to the edge of the cpu and make the lines a little closer
you actually don't need thermal paste on the edge of cpu because the cpu die is in the center or a little bit offcenter
@@Getrekt-ql3qd Wrong. The part of the cpu that you are putting thermal paste on is called a heat spreader, and it distributes the heat across the cpu.
Last one works besr
Я тоже обычно карточкой из под кокаина размазываю
In the beginning I used to put the pea size amount. Later, when with my 8950 I switched to the X because why not. Nowadays I butter my toast because I want the best thermals I can get. It's evolution baby!
i will do the spatula if i have one
I don't know much about this. Is it possible not to put it or is it necessary
Ни один из этих способов не будет работать, если площадка кулера не является идеально ровной
Do ryzen cpus cuz they have a different shape
i think similar
This proves that the pea strat is the worst one
I think the X is better
Right? I prefer the light X method
@glasscannon4723 of course man , you can see the results
Ох, можно намазать с другой стороны, термопластину кулера и приложить уже намазанную.
Conclusion : grab a spatula is not that complex
Oh I thought we put it under the CPU
😭
@AryanSharma_AF joke lol
Капельки достаточно. Много термопасты не нужно. Её цель это закрыть микро/мини трещины на процессоре и системы охлаждения чтобы лучше была теплопроводность.
А также когда вы закручиваете систему охлаждение,то система охлаждения гораздо сильнее давит на термопасту и она лучше рассплывается по процессору
Какие еще трещины?😂
@@6ejlblu_kot310 миро трещены их ток под лупой увидеть можно
@@6ejlblu_kot310Крышка процессора не идеальна ровная и там имеются микро трещины в которых находится воздух, следовательно плохая теплопроводность а термопаста эти трещины закрывает и делает поверхность процессора более ровной.
@HZLOL2323 , ну это не микротрещины, а просто не идеально ровная поверхность,.грубо говоря
@@6ejlblu_kot310 Я это и имел в виду
I don’t use any, works like a car with no engine.
Romm temp 30☠️☠️
i use the last pattern
Imo there is no right or wrong way of applying thermal paste due to multiple factors like paste quality, mounting pressure, and ambient temperature. As long as the person uses enough thermal paste the performance should be fine.
Long story short, it really does not matter, if you want the least hassle tho, use the spatula, there's almost no push out
Cross and four dots 🗿
X is goated
Аксиома Эскобара, получается
чел не понимает ,что прижатие охлаждение куда сильнее его надавливания руками
Room temp 30*💀
Where avg temp
Был Ryzen, стал Intel...
Conclusion: everything is the same
※ is perpect im ngl
AMD❤❤❤❤❤❤❤❤
Stop being lazy. Spread the past on properly. It takes like 30 seconds or less to cover the entire CPU with paste.
Thin and evenly spreaded but taped off on the edges about 3mm to compensate for the inevitable paste “press out”.
3 CPUs so far.
Works best for me.
Я один пентаграмму на процессоре рисую
amazing bro, maybe it works well too
Проблема в том, что человеку уже можно показывать всё что угодно и он будет это повторять, потому что мозгов уже своих нет, чтобы подумать, разобраться как будет лучше
X 점 4개 당구 마크 안하시다니 실망이얌 ㅠㅠ
i'll try in the next time
Dot is best
You don't push down evenly onto the CPU, so the see through representation is false. You tighten each corner screw one by one. Result is a shape close to square with rounded edges. Small bead in the middle is best and enough.
30 градосов Цельсия в комнате ☠️
5! Only 5!
This is bullshiet. If you put enough in mid it cover all cpu
Посмотрите скальпирование проца. Достаточно пасты в центре, так как проц прилегает к крышке только по центру. Мазать на весь не обязательно
Видео хоть посмотри, там в варианте с капелькой 87 Градусов максимум, а если полностью размазать то будет 82 макс. К тому же, медная крышка нагревается практически равномерно
Посмотрите скальпирование современного проца, особенно с чиплетным дизайном. Края по 3 мм можете не мазать.
Yo ese mismo CPU y en X, $@lu2
Covering the entire chip method wins. I never understood why someone just put one dot of past. It would be to save past? The entire CPU burns equally, not just the center. It's necessary to cover the entire CPU.
Показали амуде а тестируют интел
The best one is dot
Did you not watch the video at all?
@@rage_bot_mc i think u should spread thermal hehe
@@koreankorean5645dot is easy and is better than some
Just get a decent air cooler or AIO. You do not need to test this thermal paste thing. 🤦
Imma smear bear
คนไทยนี่555😂
Свастику надо было 😅😅😅
Small and fat box in centre
Мажут как масло на бутерброд 😂 ЗАЧЕМ? ЗАЧЕМ СТОЛЬКО ПАСТЫ? Слой должен быть немного прозрачный!!
People just can't do it...
None of those is right. You need to apply a thin cover all over the die. It is not about the paste covering, it is about the paste filling the little spaces on the surfaces.
Эти узоры придумали глупые люди, чтобы более глупые повторяли
x beter
а что если…
Troca de forno kkkkk
Кулер болтами крепят
Да ну ваши методы лучший метод это пальчик под салафановый пакетик и потом мажешь термопасту сколько нужно😂
Кто насрал в сокет?
overthinking👎
😋
❌✅
Кто-нибудь написал, что у стекла херовая теплопроводность? Сама по себе термопаста не отводит тепло.. мозгов у авторе не хватило, чтоб использовать медную пластину?