ฝัง
- เผยแพร่เมื่อ 20 มิ.ย. 2023
- In this video I show you a cool woodworking project for beginners.
SUBSCRIBE:
WOOD DESIGN
/ @wooddesign6730
WD Restoration
/ @wdrestoration
Music in this video:
Music by / ikson
#woodworking #diy #Woodworking Projects - แนวปฏิบัติและการใช้ชีวิต
It's difficult to watch something that says for beginners when no beginner has quite the arsenal of tools like this.
Right. Here is a "beginner" who went out and bought a table saw, a planer, a jigsaw, a huge work bench, 30 clamps, a miter saw, a gigantic belt sander, cylinder sander, and then proceeds to draw six angles with no explanation whatsoever. Is this some kind of joke? All for a head phone holder? Just toss the head phones in the drawer and save us the time.
I'm going to say if you can't figure out how to do this with basic tools then this probably isn't a hobby or job for you. Just because he is using higher end tools dosnt mean a beginner could not do this with a couple of basic tools.
@@elmoblatch9787he didn't use the festool.domino so it's a beginner project 😂
@@user-do9ry1em7j disagree beginner means no experience just starting out this is not a beginner level woodworking project, it's a lot of work for what it is does looks awesome though
I stopped watching when the 3rd or 4th major tool appeared. No explanations for assistance. I don't even know what was being built but this certainly wasn't a video for beginners.
Right. Here is a "beginner" who went out and bought a table saw, a planer, a jigsaw, a huge work bench, 30 clamps, a miter saw, a gigantic belt sander, cylinder sander, and then proceeds to draw six angles with no explanation whatsoever. Is this some kind of joke? All for a head phone holder? Just toss the head phones in the drawer and save us the time.
This misleading project requires a range of skills that 'beginners' are unlikely to have, and a workshop equipped with an extensive range of power tools to make the project possible!
Exactly. It's not even just the fact that they're using lots of different expensive tools. It's that there are many processes involved, a lot going on. For a beginner project, I expect something much simpler than this. I have seen other people point this out, and some respond that oh, you could do this with much simpler tools. Fine, but beginners like me might know that or might not. I enjoy watching this kind of work, just don't call it a "beginner project"
Agree
Nice project and end result , but seriously how many beginners would have all that equipment
As a 70 year old woodworker that was an elaborate process. Glue it cut it sand it job done.
OMG! Could have one delivered from Amazon in a day while using my woodwork skills to build something worthwhile.
I’ll never get that 12 minutes back
If you're a beginner with all that expensive equipment, you've got more money than sense!
All that festool gear and it took him that long is embarrassing. Could have cut that in a third easily
He uses his father's shop. He is in many of his father's videos too. He is learning from a very skilled woodworker.
A way to show off your design ideas and wood working skill ,,,yes,,,, also a way of showing how many nice tools you have and we all know it's nice to have a lot of nice expensive machinery.
I could have made the same thing using basic home power tools.
Have faith everybody fancy tools make the job a lot quicker and help with accuracy etc but the pleasure and pride is in the final product .
A lot of amazing things are made with basic power tools or hand tools only.
Pour débutant?! Quel débutant à toutes ces machines?! 😅
Beginner doesn’t have that much tools!
…but if someone has - he doesn’t need this video.
Cool project for sure. But, beginners probably won't have a table saw, a thickness planer, a band saw, or sliding miter saw. Oh, I almost forgot, we don't have those cool large clamps, because we're beginners.
$50,000 dollars worth of tools to produce a $ $5 object. Not exactly for beginners.
Alot of work for a simple item, but all in all well done. .
I am not sure if I would feel right about wasting all that wood for a headphone holder.
So much for that?
I thought the same thing. Not to mention that he has a boat load of money tied up in the shop and plenty of state of the art tools.
Not for nothing
C'est exactement la réflexion que je me suis faite. Ceci dit, le travail est minutieux et très soigné. Entendra t-il d'une nouvelle et belle oreille ?😂
Because every Beginner has thousands ' worth of tools and setup
@@blaisegarant4097é nada,
é mentira.. ...
@@tonymckenzie4826ㅕ
Where's the project for beginners? I have a miter saw, jig saw, circular saw, and a small garage. How is this for beginners?
What was the liquid sealed up with the wood for 4 days?
I agree with most comments about this being a little much for a beginner but if he would have shown what he was making first, I would have just hand drawn that piece on paper, use that to cut it out of a solid piece without all the gluing boards together and sand it with palm sander, finished with hand sanding, stained and varnish, and I bet you would not know the difference.
The clamp you used through the hole in the bench. What would you all that and where could I get some. Thanks.
Хочешь увеличить лояльность подписчиков? Тогда, пиши, что делаешь! Хотя бы в описании видео!
Ich kenne keinen Anfänger der mit solchen Maschinen arbeitet.
Ah yes the beginner video where the opening shots is of a large shop saw table followed by a shop planer 🎉😂 superb
While a nice, fairly simple project the assortment of tools, some very high end, is a little much for the beginning woodworker.
With such expensive tools it is not a project for beginners...
Not in the slightest.
Every beginner has 50,000 to 60,000 dollars worth of equipment.
Ideal para principiantes, sobretodo con el nivel de las herramientas, muy de principiantes 😂😂😂
That's a lot expensive machinery to make something you could use a clothes hangar for.
Хорошая работа,хорошая подача материала. А по стойке-жидковата. На цыпочках вешать наушники и на цыпочках брать их.Стойка будет постоянно падать. Распорку-упор поперёк ножки у каблука доклеить или врезать для устойчивости. P.S. Если заморочка с постоянным поднятием и установкой её не мешает,то это самое то.
А зачем на 3 дня в ведре?
the title confused me, should have been easy project for expeienced woodorker with lots of tools
to be fair, i think that would be more confusing......
Istimewa,,peralatannya canggih
Principiante, si. Pero esas maquinas aun en version hogareña hay que hacer mucho dinero para comprarlas sobre todo en Argentina .
@ leonardoal9073 esa es la idea de casi todos los 'videos para iniciantes' de los youtubers woodworkers 4.0. un monton de maquinas caras para miles de views, pero que se hacemos el proyecto con herramientas de iniciantes, ni la calidad ni el tiempo de produccion son los mismos, asi, la plata tampoco
That's a great idea. I need something like that because I always pack mine away in their box when I've finished using them, and it becomes tedious sometimes.
Neat idea! Not for beginners though.
Those saw grinding sounds are great in my headphones. Thanks.
Немного критики как коллега коллеге: содержание должно соответствовать названию - для начинающих. Я просто представил, что зашёл начинающий столяр поучиться и как всегда видит, что на каждую операцию отдельный станок. А где взять начинающему все те станки на которых построено изделие? Если столяр начинающий, то и работу надо показать с минимальным набором инструментов: циркулярка, ручной электролобзик, и набор наждачки на колодке:)
I could have saved a bunch of steps cutting that out of a 16" 2x12.
5:11You like cutting bread very sharp
Most beginners don’t have most of the tools used
Super sympa comme projet. J'ai deux questions si tu peux prendre le temps d'y répondre.
1 - Qu"as-tu mis comme produit pendant 4 jours. Le bois a apparemment absorbé les vapeurs, quels est le but ?
2- Où as-tu trouvé ta règle (rigide et gradué) en alu, cela fait un bout de temps que j'en cherche une de ce type, voir un peu plus longue ?
D"avance merci de ton retour
Пары аммиака делают в дубе эффект мореного дуба
What did you use to color the wood (the liquid in the cup)? Is that ammonia?
Ditto
Clickbait?
Look how I made this simple child's stool, with tools that only cost £2million!
Sangat simpel dan menarik👍👍
terima kasih banyak untuk melihat
Hola, creo que se desperdicia mucha madera y pegamento, se puede hacer el mismo proyecto uniendo (colando) directamente piezas más chicas, ajustadas al tamaño final de la pieza. De todas maneras me gusta el producto final.
Aber die Idee und Umsetzung ist klasse, ich hätte nur och den Fuß etwas standsicherer gemacht.🤙🤙🤙
How many beginners you know have access to those pieces of equipment.?
Very nice job but 5 days of work for this one piece? And agreed with previous sharers - what beginner has all this equipment?
Какая сложнейшая работа. Это просто невероятная задумка. ))))))))))))))
Sí hay algún principiante que tenga toda esa maquinaria lo felicito, con todo eso es sencillo hacer cualquier cosa
Sou alérgico a amônia, não tentaria jamais usar este produto em minhas obras de martesanato!
Ilmu pertukanganya sangat bagus kawan saya suka kreatif sekali
Yeah, because every beginner has a band saw, 12 parallel clamps, a thicknesser and multiple sanding machines. The result wasn’t worth the effort either.
Of during the build you want to use your huge tool set thats fine but whole doing the video you need to explain what youre doing and how we could do it with what most beginners have loke a circular saw and drill. Not a bandsaw and table saw
Why would you bother to fume to get coloration if you’re just going to stain it? Please explain.
Thank you for viewing.
I don't paint the piece at the end, I just coat it with clear wood oil.
No router mate
Чудовий вішак вийшов! Та дякую за ідею з аміаком, бо дилюсь Японців, а у них там постійно використовують деревину такого кольору і не знав, чого вона така!
*muy buen trabajo!!!*
😀😀😀😀
Wirklich klasse Projekt, aber sicher nichts für Anfänger....
Looks great but you gotta get that beginner word out of the description 😅
Are beginners supposed to have a wood planer? Can we make a realistic video instead of a showy one?
Pekerjaan yang bagus sukses sahabat🤲 👍
What beginner has all the tools that you used I have simple hand tools
A time-consuming video for making a piece that was very easy to make from leftover wood and simple tools
For anyone else wondering, the stuff in the brown bottle is a 10% ammonia solution. 9:39
first 10 seconds over 10k in tools great suit for beginners😂
Hey beginner, just fire up your powermatic table saw move your feztool tracks out of the way and store them next to your systainer and gold bar collection. 😂😂😂 just joking here but woodworking can be extremely expensive and it is hilarious to assume a beginner would have a full shop
Tools tools and more tools, show me a beginner that has all those at their disposal???
Todo bien excelente, pero ningún principiante tiene esas maquinarias (por favor)
For beginners with a full blown wood workshop. 😂
As a beginner I have literally the same arsenal of tools. Maybe you should reconsider the title. Thanks for your effort though
Эммм..для такого оборудования такая поделка как на уроках труда...
This is a “Beginner?”..pretty good tools for a Beginner…
Dont have belt sander, no place foer either
y esto es un proyecto PARA PRINCIPIANTES? que principiantes tiene esas maquinas y su correspondiente manejo? encima para hacer eso......
Nice beginner workshop! 😂😂😂
Carpintaria de iniciante como?
R: com um belo capital de investimento em ferramentas,
mas sem conhecimento (porque é iniciante).. ...
I hate when chemicals are used but not explained!
Ganz nettes Video...nur hab ich meine Zweifel, dass ein Anfänger solchen Werkzuegbestand hat...😂
I dont have band saw an am more than a beginner dont need that many clamps either
Was ist das für eine Flüssigkeit?
Yes, what is the clear clear liquid in the bottle that was placed in the trash can that changed the color of the wood?
Para cambiar el color de la madera, el producto que se usa es Amoníaco.
Thank you for viewing.
The liquid is ammonia
❤👍
Привет, а что за жидкость наливали, что дерево потемнело? Прошу прощения, если это все знают, кроме меня.
Аммиак.
Нашатырь.
Нашатырный спирт.
salut bon jeudi soir 🙂
i come here as a decently experienced wood worker myself just wandering down the rabbit hole, and i come across this, a guy using tools that most people have never even heard of to build something that people dont know what it is till the end, only to find out they dont have the skills, but more importantly the tools or resources to build, get real bro this is not an easy beginner project because beginners dont have access to those things
What a waste of wood, time, glue and energy. So many resources to create so little.
Nice techniques!
Thank you so much for watching.
It's a big job
У "начинающих" обычно мастерская оборудована получше и побогаче, например, не видно Лазерной резки СМС, и вакуумной покрасочной камеры.
Ахахаха👍
Minus!!! I don't see anything for "beginners", I see an expensive tool and a show-off!!!
No chance getting thart angle thing of wood i only have rip saw tennan saw and hacksaw
All “beginner’s tools “?
This is absolutely not for a beginner....there are at least half a dozen specialty machines used here.
1:40 Oh, daddy...
Perfeito 👍👍
muito obrigado por ver
For beginners?? Your out of touch my friend! Beginners don’t have all those tools.
Yeah. So just run out and get yourself 25 grand in tools and you too can build a head phone holder.
Me hiciste perder 12 minutos de mi vida. Tanto trabajo y herramientas para terminar con un simple soporte para audífonos. Qué gran pérdida de tiempo.
Гарна вішалка для нувушників вийшла. Але щось мені підказує що із стікістю в неї буде трохи не дуже. Тебуло якусь ширшу підставку робити.
Дякую за перегляд. Підставка стоїть на двосторонньому скотчі.
Куча инструментов, а фантазии нет. Столько дней потратить на закарюку. А уж о рациональном использования материала и говорить не приходится. Раз уж она, всё равно клееная, так использовал бы кусочки и обрезки.
As soon as my $1,000's of equipment is delivered I'll get started because your instructions for beginners was so clear....oh yeah no instructions on what you were doing. Just speed through the video ....waste of my time.🙄