ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Bosch F23 Error Fix Reset You can Repair This
ฝัง
- เผยแพร่เมื่อ 4 ก.พ. 2021
- Bosch F23 Error Fix Reset you can fix this easy. Step by step tutorial in how to repair f23 error fault code. Bosch Washing Machine F23 / E23 error is common on Bosch Front load washing machines equiped with aqua stop function.
Thanks for posting this! I called my local repair place, and they said they could come out "sometime next week; we'll call you"... I found your video, and it empowered me to open up the back panel. I didn't see anything wrong, even though water was pouring down. So I removed the top panel (2 screws and viola!) and immediately saw the problem: a small black tube had come off the connector. I dried all the water, reconnected the tube, and it's working great.
Not only did I save myself a lot of $$, but I feel useful around the house for the first time in years ;)
Thank you so much!!!! Had code -23 on my Bosch series 8, after watching your video my husband was able to fix the issue and the second load is nearly done! You are brilliant!!!
I'm an engineer and doing a lot of DIY. Your video is clear and right to the point. Thank you very much.
I accidentally flooded my mum's laundry by leaving the drain hose out of the sink during a wash, and enough water got into the machine to set off the aquastop. Even the cost of the call out by the Bosch mechanic would have had me eating ramen and frozen vegetables for three months to pay her back, let alone whatever he would have charged just to dab up some water. This video really saved me, dude, thank you!!
Welcome mate. Glad you’ll be off the Ramen 😀
Congratulations on the excellent video. My Bosch Logixx 8 Sensitive machine caught water in the aqua stop detector because the filter was clogged. There was no damage beyond that, but according to the Bosch manual, I could not be the one to unblock the F23 error: I would have to resort to technical assistance.
In fact, with the help of this video and after drying the circular base of the dectector very well, with absorbent kitchen paper, and finally the rest of the moisture with a hair dryer because I had the machine full of clothes that could dye, I was able to unlock the machine.
It's back up running and it's great. I saved at least € 100.00, and in addition I got to know the inside of my washing machine.
Thank you so much for sharing.
wow welcome im so glad I was able to help you
Thank You so much! We saved 100 Euro thanks to you! Like Ana, our filter was clogged and once we unclogged it, drained the water and dried out the machine, it was good to go. Just did a load of wash with no problem and didn't have to wait a week for service. What a racket Bosch is running!!!
awesome glad you were able to save some money and get back to washing asap
As an engineer, I commend you on clear, no BS presentation.
I'd give you priority interview for a job.
Cheers.
Steven
Cheers thanks mate
Thank you for your excellent video. My machine is a Logixx8 WAS32794ME and it looked exactly the same from the rear and within. In my case, the leak came from a small black hose that had detached itself from a spigot. I was able to identify this following your instructions and then removed two more torx screws to slide the top of the machine off. The hose was on the left side and the spigot was attached to the drain pipe. Simple fix, saved me a couple of hundred bucks to get a technician out. THANK YOU FOR POSTING!
Welcome I’m so glad you sorted it out and you’re back washing again
Instructions and information is absolutely spot on.. I was able to fix my series 6 washer dryer by following the instructions provided.. there was water accumulation due to the dishwasher drain hose accidentally coming off u bend securing it to the sink and leaking at the back of the washing machine.. cleaned all the excess water and it is working perfectly again.. thank you
Thanks! It really helped finding the error! It was a draining hose on the back part full of garbage, near the water pump, but the worse was the extracting hose on the top part, than was out of place, and the o-ring was now where to be seen. The trick was to follow your instructions, and follow the water dripping. I had to dismount both the back part and the top part, but it worked out! Thank you very much.
Thanks. Followed the steps and it worked perfectly on my series 8. Tracked the problem down to a blocked drain hose, so the water must have been backing up into the machine. Also thanks to Ana for the tip below with the kitchen paper and hairdryer!
Glad you got it sorted and yes Ana’s tip is great 👍
I have the same problem, now I am trying to get it fixed.
@@petricamihai-gavril671 hi, hoping you got yours fixed. how did it go ?
Fixed, 45 minutes, napkins, hair dryer
Thanks! After watching this video, I fixed the leak and dried up the circular water detector. My machine back to normal. No more showing error code… Thanks again.
welcome glad it worked
God bless you, for all the incredible repair recommendations.
Our machine works again just fine.
Thank you.
Awesome glad it’s working again
Fantastic! Solved my problem. It was a lace from shorts which was stuck in door and caused seal to leak. Dried out, set to Drain cycle, then wash cycle and F23 error fixed. Thank you. 👍
Hi. I have the E23 error code on my Bosch washing machine. Enjoyed your video, informative. Now I need to fix it. Thanks.
You're welcome!
Perfectly explained 👍 found my locking clip, that connects where the soap dispenser enters the drum wasn't sealing properly. Took the top and front panel off to gain clear access, dried the bottom inside, and now it's back up and running 🤙🤙
Awesome I’m so glad it worked out
Very clear to understand. Thanks for posting. I bought you a coffee.
Awesome, thank you!
Thank you very much for sharing this, it worked for my siemens washing machine, saved the money and trouble of calling a technician
welcome i'm so Glad it helped
Many thanks for taking the time to prepare that video, greatly appreciated and most helpful. Cheers, you’re an absolute star! If you are ever in Perth, I need to buy you a beer!
Thanks man! Great teardown. I "look forward " to checking out the washing machine tomorrow with your tips in mind.
I have same error today, i left it as it is for 1.5hour, because i was busy in some other stuff , and now it is perfectly fine ❤ Allhumdulilah 🎉
helpfull, I know my machine better. Problem sort of went away after opening it up at front and back and checking it for leaks. Feel more confident now adressing error messages...Thank you!
Bedankt u heeft onze geholpen
Glad it helped ya
Thank you for the video.
Thank you sir..to much clear discrimination
Very helpful video. Thanks Mr Washy Washy
Superb! You saved my day, and not only that... :-) Thanks for the great video!
Thanks a lot, very helpful, after repair the leak, works just fine.
welcome glad its worked out for you
Thank you. My Bosch front loader was showing an E23 code. My husband replaced the tap where the washer was connected. Could not get the machine working again until we had thoroughly dried the sensor with the hair dryer
Thank you dude that’s very helpful
Glad it helped
Thank you!!🙏
Thank you! Fixed E23 error on mine
Awesome glad to hear it worked out
Thanks a lot for the upload, it helped me a lot!
Very useful video and thanks for sharing it! It worked for us
Welcome glad it helped you
Congrats for the content !!!!
Thank you! worked like a charm!
welcome glad it helped
Thanka dude. Really helping
תודה
Thanks. This helps a lot!
Welcome glad it helps
4:21 a nice way to remember where everything goes is to make some pictures with your phone.
I have a Maxx 7 and I can’t open the machine like you do here. The back plate is in a small nearly circular shape. You can’t see or reach to the bottom. On the front it’s the same, you have merely a small hole to see through but the rest is hidden. There are a lot more screws but it definitely works differently for this one.
Hi what about at the bottom ? There should be a large hole there
@@askmrwashywashy you mean the bottom that is accessible by turning the machine on the side? Yep, we checked that. There is a large panel with a bunch of screws and that would have been my final idea for the night. But eventually, we realized that the leak was coming from the door seal. It looks like something or someone tore out a piece of the seal (by accident). Anyway, I've ordered a cheap replacement part and hope that will do the trick.
Thanks for the fantastic video and quick reply!
Thanks
Welcome, thank you so much
Thanks for your excellent video presentation. I have a question regarding my machine showing an E23 error, which was caused by a tissue accidentally falling into the washing powder draw unit. The tissue was sucked into the unit, causing a blockage of a pipe, hence the E23 leakage side-effect. How do I remove the tissue, and from which pipe ? Your help is appreciated. Thankyou.
Hi Mr Washy Washy, excellent instructions! I've located my leak, the short grey tube running over the top of the machine is cracked. Any tips on where I could source a new one? Cheers!
Thanks for your video! I have managed open up the front! I can see all the water at bottom of washing machine, if I dry out the water, will it clear the F23 instantly? Thanks
Thanks!
❤
Hi Mr Washy Washy,
Great video. Thanks for uploading.
For me the Aquastop system inlet is leaking right after the hose enters the machine and it is difficult to trace if the pipe is leaking or from where the water drips.
Can you advise HOW the drip cause can be found for fixing it?
Do you have a video on how to replace the aquastop system?
Do I have to replace the whole system?
Where best I can get guidance for this for DIY - Do it Yourself?
Thanks
Hi welcome. Is the water leaking from the black hose when the water enters the soap dispenser ? Unfortunately I don’t have a video of replacing the aqua stop hose. It might be there hose has come loose where it enters into the washing machine (the water valve and hose meet) sometimes these become loose. What’s your model number I’ll attempt to do a video in the next few days
@@askmrwashywashy Many thanks for the reply.
It is not the black pipe but the white one which is connected from the water inlet point to inside the washer. The place where it gets inside (at the inner side of machine) it has some drips. One technician has indicated that there is a cover (where i5 has drips) and that has gone missing and that's why it has the issue. It may be a temporary fix by using some sort of stopper and sealing it OR else the comple aquastop system needs to change.
The model is Logixx 8
Thanks again
How do you actually reset the washing machine after you’ve solved the issue?
If you still have flashing F:23 after fixing the water leak and drying everything out, the problem may be mechanical rather than electronic or electrical. I went through all the checks on this video, fixed the leak and completely dried out the ‘drip tray’ but still had flashing F:23. I then tried multiple combinations of dial settings and button pushing to ‘reset the electronics’; nothing worked. Eventually, I went back to basics and inspected the leak sensor (see video from 6:30 to 7:10). It is very simple; underneath the plastic housing is a polystyrene disc that will float up on any water and and close a small switch. Somehow, even after thoroughly drying everything, the disc was now permanently closing the switch. I simply raised the switch housing by Blu-Tack-ing two coins under its left-hand end; problem solved!
Yo, I opened up my machine, but i cant find the leak. I checked the black tube in the front, the silver ring is still properly attached. Should i turn it on and run a washingprogram so i can see where its leaking?
Thanks in advance
Hi yes that would be best to do and you will find the leak
i am getting this error in my gorenje washer dryer . where i can see abt leakage ?
Thanks Mr Washy, the leak appears to be above the rear upper panel. Can I remove this upper rear panel, or should I call a repair person? Mal
All fixed now, thanks for a great video. I removed the top of the washer and found a small hose from the tub to the drain hose was off . Refitted it, ran it through a cycle and now no more leaks. Thanks again Mal
Found it weird you suggested turning on a wash cycle when the code shuts down the machine from operating.
I washed with my detergent dispenser drawer opened, now f23 error, am sure there is no leakage, now then how do I remove the error code?
If you still have flashing F:23 after fixing the water leak and drying everything out, the problem may be mechanical rather than electronic or electrical. I went through all the checks on this video, fixed the leak and completely dried out the ‘drip tray’ but still had flashing F:23. I then tried multiple combinations of dial settings and button pushing to ‘reset the electronics’; nothing worked. Eventually, I went back to basics and inspected the leak sensor (see video from 6:30 to 7:10). It is very simple; underneath the plastic housing is a polystyrene disc that will float up on any water and and close a small switch. Somehow, even after thoroughly drying everything, the disc was now permanently closing the switch. I simply raised the switch housing by Blu-Tack-ing two coins under its left-hand end; problem solved!
Thanks Kim, took the advice of the BOSCH repairman- tip it forward a bit to drain out the water and/or don’t use the machine to let the water inside dry up. It worked. After a couple of days the error code was gone.
Once the leak is detected and fixed, how do you reset the system? Thanks.
If I leave it, will it dry normally and the sensor will deactivate itself? Thank you.
will take a long time. maybe tilt it and then it dries. You would need to reset the code as it won't do it itself
@@askmrwashywashy How do we rest the code, please?
If you still have flashing F:23 after fixing the water leak and drying everything out, the problem may be mechanical rather than electronic or electrical. I went through all the checks on this video, fixed the leak and completely dried out the ‘drip tray’ but still had flashing F:23. I then tried multiple combinations of dial settings and button pushing to ‘reset the electronics’; nothing worked. Eventually, I went back to basics and inspected the leak sensor (see video from 6:30 to 7:10). It is very simple; underneath the plastic housing is a polystyrene disc that will float up on any water and and close a small switch. Somehow, even after thoroughly drying everything, the disc was now permanently closing the switch. I simply raised the switch housing by Blu-Tack-ing two coins under its left-hand end; problem solved!
Is there a way to reset the aquastop? Machine leak fixed and water residue removed but E23 still beeping and door locked. Won't wash. Thanks
Hi Sally what's your model number ? What was leaking ?
It's a Bosch Eco Silence Drive series 6 front loader. Purchased 3 years ago. Can't find a model number. No leaking seen but water layer at the bottom. An unused hot tap above the washer on the wall had been dripping for half an hour. Perhaps the problem? Back off for 3 days now. Warm weather. Nice and dry base now but E23 still beeping even after holding rpm/finished in buttons together.
Thank you so much for your help.
Sally
@@sallymcdonald777 Have you recently moved the washing machine? Another thing is the base might be dry but the depression that the flood trigger sits in is still wet. You'll need to lean the washer on a 45 degree angle to the front/left/right/back whichever one you can do to make sure all the water is out. I would say the hot water tap leaking might have been your issue
If you still have flashing F:23 after fixing the water leak and drying everything out, the problem may be mechanical rather than electronic or electrical. I went through all the checks on this video, fixed the leak and completely dried out the ‘drip tray’ but still had flashing F:23. I then tried multiple combinations of dial settings and button pushing to ‘reset the electronics’; nothing worked. Eventually, I went back to basics and inspected the leak sensor (see video from 6:30 to 7:10). It is very simple; underneath the plastic housing is a polystyrene disc that will float up on any water and and close a small switch. Somehow, even after thoroughly drying everything, the disc was now permanently closing the switch. I simply raised the switch housing by Blu-Tack-ing two coins under its left-hand end; problem solved!
@@kimbalshaw1184 can I ask what blu tack ing means?
How can I open the door it's not open. I have f-23
What's E 17 error in Bosch washing machine
De ce nu afiseaza eroarea si pe ori ce program dau se aprind toate beculetele
Sir my name is salman
From bangluru Karnataka
I'm washing machine technician
I want job can you give me.
Hi mate. All I can offer you is this free advice on how two fix :)
Before all these, just chek that your water is on, what i have closed, that why it sow that code🤣
I did the E23 and was working, I cleaned filter and make eveything dry, thought all is gonna work perfectly, for 10m was .. then it stoped again and making weird noises and E18 appeared :( any ideas or clues?
Hi something is obstructing the pump from draining. Please put it on spin only with filter cover off and have a look inside to see if the pump impeller is spinning. Sometimes a coin is caught in the pipes too
How do you clear the code??
If you still have flashing F:23 after fixing the water leak and drying everything out, the problem may be mechanical rather than electronic or electrical. I went through all the checks on this video, fixed the leak and completely dried out the ‘drip tray’ but still had flashing F:23. I then tried multiple combinations of dial settings and button pushing to ‘reset the electronics’; nothing worked. Eventually, I went back to basics and inspected the leak sensor (see video from 6:30 to 7:10). It is very simple; underneath the plastic housing is a polystyrene disc that will float up on any water and and close a small switch. Somehow, even after thoroughly drying everything, the disc was now permanently closing the switch. I simply raised the switch housing by Blu-Tack-ing two coins under its left-hand end; problem solved!
after the leak/hose etc is fixed how to you reset machine so e23 error stops alerting
hi please use the reset that I posted in this video
@@askmrwashywashy where is the rest part? I have the same problem, after fixing the leak, but still have the e23
I have same issue, can't get rid of error code
If you still have flashing F:23 after fixing the water leak and drying everything out, the problem may be mechanical rather than electronic or electrical. I went through all the checks on this video, fixed the leak and completely dried out the ‘drip tray’ but still had flashing F:23. I then tried multiple combinations of dial settings and button pushing to ‘reset the electronics’; nothing worked. Eventually, I went back to basics and inspected the leak sensor (see video from 6:30 to 7:10). It is very simple; underneath the plastic housing is a polystyrene disc that will float up on any water and and close a small switch. Somehow, even after thoroughly drying everything, the disc was now permanently closing the switch. I simply raised the switch housing by Blu-Tack-ing two coins under its left-hand end; problem solved!
No leaks anywhere! How do I reset the machine
If you still have flashing F:23 after fixing the water leak and drying everything out, the problem may be mechanical rather than electronic or electrical. I went through all the checks on this video, fixed the leak and completely dried out the ‘drip tray’ but still had flashing F:23. I then tried multiple combinations of dial settings and button pushing to ‘reset the electronics’; nothing worked. Eventually, I went back to basics and inspected the leak sensor (see video from 6:30 to 7:10). It is very simple; underneath the plastic housing is a polystyrene disc that will float up on any water and and close a small switch. Somehow, even after thoroughly drying everything, the disc was now permanently closing the switch. I simply raised the switch housing by Blu-Tack-ing two coins under its left-hand end; problem solved!
@@kimbalshaw1184 thanks for the reply
My machine leak s from the left side
You would need to take the top lid off and have a look inside. Hard to see where it’s coming from without taking the back cover off or front cover to fully investigate.
Thanks,I will do that!!!
Thanks
Welcome glad it helped