Ebay LS Swap Manifolds on the OBS Silverado.
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- We start on the exhaust for the 98 Silverado LS Swap. The doner 02 manifolds were just too tight, so I picked up a pair of Deepmotor $120 ls swap manifolds. For what they are, I say they are a win for the price. Thanks as always for checking out the channel and smash that subscribe button if ya haven't.
I got stock manifolds on my Ls swap 96 obs Yukon,I used the eBay sliding mounts that’s the best bet to go with I think.
I used the ebay sliders too. For the trans to match up the stock manifolds were just a little too tight for my liking.
Wonder if they might fit my 6.0 LS swap on my 4x4 Ford Ranger build and clear the front driveshaft?
I know 4x4 applications are hit and miss. But they leave tons of room compared to others so they might
@@macsboneyardbuilds yeah just trial and error. I’m building something different lol, but it’s actually coming together pretty good.
Have a list of parts and numbers that you used
Still working out the kinks for the swap. Will do a complete break down video once it's done 👍
Question is where do u get the replacement o ring exhaust gaskets ?
I've seen them on Amazon
@@macsboneyardbuilds I can’t find any … the o ring ends up melting atleast for me it did …. Urs has the o ring or the 2 bolt flange gasket
@KennethC-x8n mine had the o rings and I'm not a fan. I ordered these with a ridge and two bolt application. They have sealed up good and time will tell if they last or not.
www.ebay.com/itm/125373509996?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=tkpzzlfzt62&sssrc=4429486&ssuid=OYYuD3ObR_m&var=&widget_ver=artemis&media=COPY
Is the exhaust manifold flange 2.25”?
Yes. I used 2.5 pipe welded to the flange which sat just on the outside of the hole on each side.
@@macsboneyardbuilds awesome. thanks a lot, man!
No problem 👍