Simple way to convert Ryobi charger from 120 to 220-230 volt
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- Weight calculator: uzneo.com
This video shows how we have changed 120 volt "Ryobi" Charger to 220-230 volts and looks that this is simplest way. Now it's works well and stable. By the factory, there is voltage doubler installed inside. We just have changed such douybler to regular rectifier, only by cutting the foil on Ryobi charger electric plate and just changed varistor to higher voltage. That's all.
You don't need to damage the PCB. There is a jumper wire between the diodes that you can cut instead.
So if i cut the wire, and change waristor i can use with 230v?
hi can u send me the one you mentioning please coz i have this same charger 120v i dont want to damage the pcb. thanks and thanks to the uploader.
@@grzegorzwodecki3153 Yes.
You don't need to cut the trace on the bottom of the board. Cut the jumper between the two pairs of diodes instead. Does the same thing.
ეჰ ეს რო ადრე მენახა ხომ 2 ცალ დამტენს არ დამიწვავდნენ ბავშვები ...👍👍👍
Just change varistor and cut? Oh, nice job man!
GREAT VIDEO... THUMB UP... just wondering do you happen to have the schematic... want to change it to a slow charger... Thanks!
Hi. No, sorry
it is alright... Thanks... :)
I just Success! Thank you very much!!!
Did you replace anything or just cut the foil that he showed?
How the output voltage remains the same when we increase the input voltage. Why does the output voltage not increase as the input voltage increases? E.g. for 110V the output is 20V and for 220V the output should be 40V.
Thank you for the video, but there are some circuits with one capacitor here. Do not need to cut wires?
Sorry, do not know it.
I bought my ryobi cordless drill in US and I'm about to use it here in qatar, I forgot that the voltage is different, I plug it directly to 220v. now for sure it is damage. Just want to ask if what is the extent of the damage? Is it only the varistor as mention in your video in which supposed to be replaced first before using?
should be varistor demaged only. try to change it and follow the video.
Check the fuse!!
Nice work.
Will it work if I just cut?? Or I have to change the varistor as well?
Both
@@androgabisonia2003 What will happen if I just cut?? I don't plan ti use it with 110V anymore.. Will it work or I will damage it?
@@ezname8932 will demage
just cut off the wirring, not change the varistor ( don't have ) jet. but I believe it will work well. big thanks !
Yes, will work, but not full safe.
Do you know if is the same process for P118 model?
Do not know, sorry.
@@androgabisonia2003 the work of your video are done by you, right? If I send you pictures of my pcb, could you check and tell your opinion?
Hi. I think no. This is not my business. I just shared my experience with my own items. I can't response for devices not owned by me. Sorry.
Hi. I have a Ridgid charger. Circuit is typical as the one you attached. I did the same but the fuse burnd after a few minuts of charging. What can be worng?
Sorry, can't to say something. I do not used Ridgid. Anyway try to check voltage of big capacitors, or may be you used wrong varistor.
Is procedure same with P118 charger?
Sorry, do not know that charger
Thank you!
Just not enough to cut. You must connect 150kOhm resistors in both capacitors for balanced charging. Or can explode one of two capacitors.
Hi. Thanks for comment. Today is 2020. It's still works. Every day.
Will this variaster works (14D431K 431KD14 Metal oxide Varistor MOV 275Vac 330Vdc 275V)?
Probably yes.
Actually, it might not work, because 220V is just the RMS value of voltage. With a varistor, you need to look at the *peak* voltage - or in other words, the RMS value multiplied by the root of 2.
For 220V RMS, the peak would be 310V. For 230V it'd be 325V.
hello and thank you for your tutorial. could you give us the reference of the varistor that you use please
just remove your varistor and go to shop. Ask same varistor, or plus minus 10%, but at least 300 volt
Andro Gabisonia
Hi do you know if the Ryobi p118 charger it can be convertible to 220v ? Thanks
How much varistor should be put please help i dont know which one to buy. Thnks
usually same varistor, but need at least for 300 volt.
It's there a specific part number?
just remove your varistor and go to shop. Ask same varistor, or plus minus 10%, but at least 300 volt
Thanks so much..
14n431k or similar
გამარჯობა ბატონო ანდრო. მაქვს Milwaukee ფირმის დამტენი რომელიც 120 ვოლტზე მუშაობს, და რაც ვნახე TH-cam ზე, იგივეა გადაყვანის პროცედურა რაც თქვენს ვიდეოშია. ხომ არ იცით ვინმე ხელოსანი ან მომსახურების ცენტრი სადაც შეიძლება ამის გაკეთება? მე არ მესმის ელექტროობა და მირჩევნია პროფესიონალს გავაკეთებინო.
ბოლოს, სად შეიძლება შესაბამისი ვარისტორების ყიდვა თბილისში და როგორ გავიგო დიოდები რამდენ ვოლტიანია? (დიოდებს ვოლტები არ აწერია).
კაპასიტორებს აწერია 200 ვოლტი (სულ სამია, ორი 200 ვოლტიანი და ერთი ცოტა პატარა 50 ვოლტიანი რომელიც თუ არ ვცდები პირდაპირ ბატარეიკის დამტენზე მიდის)
120 ვოლტიან ვარისტორს აწერია TVR10271 და მე როგორც გავარკვიე მჭირდება TVR10471 რო გადავიდეს 220 ვოლტზე.
ცოტა კი გამიგრძელდა მაგრამ თქვენ მემგონი ერთადერთი ხართ საქართველოდან ვისაც ასეთი ვიდეო აქვს.
წინასწარ გიხდით მადლობას
უი, გვიან შევამჩნიე. წესით მანდაც მასე უნდა იყოს. მაგენი ტიპიურებია. მაინც აჩვენეთ ეგ ვიდეო ვინმე მცოდნეს და თქვენი დამტენიც.
გასაგებია. დიდი მადლობა!
ვარისტორი შეგიძლიათ ნახოთ პავლოვზე, სანამ პეკინს შეუერთდება, მანდ არ მისული პეკინამდე, სადღაც 200-300 მეტრა მარცხენა მხარეს რადიოდეტალების პატარა მაღაზიაა.
აგერ მილვოკის გადაკეთების ვარიანტებია. როგორც ვთქვი- ტიპიურია:
th-cam.com/video/0cBEQHX6TXs/w-d-xo.html
th-cam.com/video/k0t514Z8xys/w-d-xo.html
კი ვიცი, ეგენიც ვნახე. ძალიან დიდი მადლობა ინფორმაციისთვის!
Hi what bit drive did you use for the screws?
can't understand well?
its Ok I found it anyway...i was talking about the screws bit driver
Nothing special, just ordinary.
same question here, the screws arw different my screw driver can not went through the screw since there is a like a pin in the middle of the screw. It seems like the required screw driver should have a hallow in the middle.
Max Bilimoria It is a tamper proof/secure torx T20 bit
Can you make a same video for Black&Decker inflator BDINF20C? I want to convert it from 110V to 220v but dont know how.
Sorry I do not have it
No entendí qué le hizo :/ alguien me puede explicar en español
HOW TO CONVERT Noco Genius G7200 110v TO 220V?
Tank you very much!
Do not know. Sorry
صيني